I've got around 5000 km on them now and they really are not wearing at all. Did you get your springs set OK. Or are you getting better springs. I had to replace my springs
@RussellHill-uy9rq I will reset ride height after the first ride. I did Zbros springs on my 2020 pro xp. I like the colors on the x3 springs so if I do change it will only be the top tender spring. Or do Bilstein black hawks! Like Brian Deegan
when you look up the shock part numbers by can am they are the same from 64 to 72inch machines. tender springs vary. i did not use the hcr conversion bracket but it will help with the ride height i assume. i had to adjust the rears up a bit. fronts just a little
It depends on what parts and where you get them. I found like new control arms that someone took off and food HCR. So my swap was around $1,000. To buy it new would be over $4k! Look on your local market place. Good luck!
Im about to do a conversion and was told to use adapters that’s why I asked 👍🏻 They are saying the 64 shocks are shorter and not the same travel as the 72 that’s why adapters are needed … not sure it’s worth spending $5500+ for 72 shocks especially since we don’t do much jumping and more trail riding
Thank u man that help me a lot!
Your welcome! I'm glad to hear it helped you. I am loving my X3 now!
Good video man a lot of work -looking good gonna handle good at sand hollow -
It takes some time! Lol. Got the Turbo R for sand hollow!
Hey really nice x3. I did my x3 throughout the summer with the super atv 6" lift kit. And im loving it.
Thank you! That sounds bad ass! What size tires you running?
I'm running 32" BF km3.
@@RussellHill-uy9rq can't go wrong with BFG! Top tier tire
I've got around 5000 km on them now and they really are not wearing at all. Did you get your springs set OK. Or are you getting better springs. I had to replace my springs
@RussellHill-uy9rq I will reset ride height after the first ride. I did Zbros springs on my 2020 pro xp. I like the colors on the x3 springs so if I do change it will only be the top tender spring. Or do Bilstein black hawks! Like Brian Deegan
Merry Christmas will
Merry Christmas Bruce 🤶 🎄
Very cool video. I assume you are not getting the new can am. Merry Christmas!
I'm going to sand hollow today with my buddy that has one. I'll see if I like it. Merry Christmas!
So you don’t need 72 inch shocks ? I’m doing the conversion now and was told I need the hcr bracket or buy 72 inch shocks
when you look up the shock part numbers by can am they are the same from 64 to 72inch machines. tender springs vary. i did not use the hcr conversion bracket but it will help with the ride height i assume. i had to adjust the rears up a bit. fronts just a little
How much cost to make it 72” if you don’t mind to tell us
It depends on what parts and where you get them. I found like new control arms that someone took off and food HCR. So my swap was around $1,000. To buy it new would be over $4k! Look on your local market place. Good luck!
Did you use the braket adapters for the shock tower to get the 64 inch shocks to work ?
Nope. No adapters needed. I had to adjust the rears up a bit. Fronts bolt right on. Ride height decent
Im about to do a conversion and was told to use adapters that’s why I asked 👍🏻
They are saying the 64 shocks are shorter and not the same travel as the 72 that’s why adapters are needed … not sure it’s worth spending $5500+ for 72 shocks especially since we don’t do much jumping and more trail riding
What about the 72" shocks gonna be a low rider with out them lol😮
Nope same shocks, at least length between the models. Sits nice, thanks for watching. Merry Christmas!
You must not watch too the end huh
@montanamountainutv yes I watched to the end lol.. I just seen a set of brackets for the 64 " to 72" on marketplace ill tag you
🐶 Blu??
He was chilling upstairs! Thanks for asking brother. Merry Christmas!
Happy Holiday's from Tx bud