World's BIGGEST Jacketed Hollow-point bullet? The Fury
Vložit
- čas přidán 5. 09. 2024
- We test out some impressive custom 12ga. slugs that are without any doubt, the largest jacketed lead HP we've ever tested. These 619 grain monsters worked well in both full-rifled barrels and rifle-chokes and are only available as a loading component from Fury Custom Bullets.
I'm sorry CZcams is destroying your channel by not putting vids in feeds. I thought you where taking a break, this is first vid on my feed in a long while.
See everyone! I wasn't just imagining it! lol thanks John.
I've been thinking that it's strange that they haven't been taking down some of your videos since they have taking some of demoranch videos, for example when he put some stuff in a shotgun shell...
But your "diabolic" Shells are Still Up?
Those who's monitoring is kinda silly i think 👎
Cheers from northern Sweden 🍻
@@taofledermaus Ive noticed it with quite a few channels. They are usually gun related, politics related channels and comedians.
CZcams is turning into theirtube
Ads Are Running fine for me on his videos. I don't know why there are so many people in the comments contributing to a fake hysteria.
"What's that?"
"A .73 hollow point."
"What are you hunting?"
"...Oil tankers."
Mongoose556 Somolian Pirates ;)
Don't tell Iran
@dennis coates nice one
That's not very murica of you
@@SSPENGUIN1 topical :)
Ok Taurus, time to step up and come out with a "Supreme Court Judge" that uses these brass cased shells in 12ga.
Taurus Kavanaugh sounds better lol
@@trumpgang410 Damn, you had my response first!! Hahaha...
Hahaha 😂
Supreme Court Justice would be funnier
Call it the Gavel, because it will smack you in the forehead when your wrist snaps.
The slow motion of the bowling pin is one of the coolest shots I’ve ever seen in slow motion!!
It's nice to come back and watch our good ol' boy, Danny.❤️
Hell yeah. The other dude is a good shot but literally *everything* that comes out of his mouth is some stupid, cringy, "creepy uncle" bullshit. That's what happens when Butthead grows up to be a cop.
"Huh-huh, you said "hole" and "penetrate. Huh-huh."
Two of the coolest slo-mo impacts ever! First the spinning bowling pin and the the fractures in the concrete. Thanks guys.
thank you!
The slo-mo shot over Danny's shoulder (starting at 4:30) that showed barrel-to-target travel was EXCELLENT!
You can also see the barrel harmonics that they were talking about in that same shot.
Thank you!
Yeah, that was a super-cool shot. You never realize in real-time that by the time it's stopped recoiling at that distance, even a slow round like that has already hit its target.
It really was.
You know, when I first saw your channel, I thought it was going to be another guy talking in the extreme dude voice shooting the most tacticool deadly elite barely legal slugs ever.
After almost a year of watching you, I realize you're just a bunch of old guys playing with Jell-o and making dad jokes.
Not disappointed.
lol
Pulled my truck over at a rest stop and took my 30 minutes break just so I could watch this. Always makes the work day a little less awful, thanks for doing what you do
God speed and good traffic
Keep that truck rolling driver
"Good thing there is a good backstop behind the target!"
"Yeah, that concrete barrier sure is strong!"
"Um, I meant the Earth!"
the outrage
@@taofledermaus Jeff...I have something to say.
Danny...is a legit national treasure when it comes to making the shot. Talk about a guy that can just get it done.
Danny might be one of the best all around shooters I've seen on CZcams or anywhere else. Just amazing.
@@joemo1033 it's awesome that we have these videos of him to remember him by..
Energy transfer will always be incomprehensibly fascinating to me
That brass shell reminded me of prom night. Misfire followed by disappointment.
lol
Yeah, but I've never heard of anyone managing to salvage a bad primer by being good with their tongue.
I haven't missed a single episode... no problems here
Deimos000 lucky!
@@gregj6542 you have to tune your youtube reccomendations. Actually like the videos you like and click the little thing to tell youtube you arent interested in certain content. I see all of taofledermaus's content.
Man these older videos mean a lot more now. RIP Danny we love and miss you
17:19 Danny, the Bob Ross of the range..... Happy little bullets.
I don't know who designed that table but boy he most be proud of it
Eric saul i think hes still using it!!!
Really..
Your kids acting up, tell them to go stand by that shot up table. I bet they straighten right up !
Looks like Merican army issued
Yes, I'm impress with that table
That pin spinning before it left the table was amazing. Glad Danny hit it slightly off center or we never would have seen that.
"I need a revolver that'll shoot these...." Oh, hell, Danny, don't let Matt from Demolition Ranch hear you say that. He's nuts enough to try and get one built...for himself. :)
Break action shotgun pistol. Easy to load, easy to break the wrist. Lol
maybe a modified Becker blow-forward or colt 1855 10-gauge (or in case of desperation a streetsweeper) ?
@@isaacandcorrine we can live vicariously through Matt lol.
Well, if someone would make a LeMat replica with a 12ga barrel instead of the original 20ga, there would be a revolver that shoots .73 Fury.
"Get one built," nothing. Do a search for "streetsweeper." They're no longer produced, and have been declared NFA destructive devices, but you can still buy them secondhand, if you're willing to pay whatever they're going for now and jump through the necessary regulatory hoops.
I like the subtle star wars audio you slipped in there "stay on target"
That Gold Squdron dialogue during the highspeed footage was absolutely perfect.
"if it fit's... it shoots" with a TFM bat logo on a T-shirt.... I'd buy that. Merch baby!!
"We need a revolver that will shoot these" I think only Danny would be able to survive firing that thing.
Do a revolving cylinder shotgun.
@@shred1894 that was done by the Germans in 1906. Go sift through Forgotten Weapons videos for it
You'r looking for the russian MTs-255 revolver shotgun.
Hellboy could handle it or Arnold in his Conan days.
Derringer; )
Great video as always. Thank you guys.
Welcome back Danny ^^
thank you!
Damn..... That gyroscopic stabilization on that bowling pin
Right?!?
it looked like when they would release a satellite from the space shuttle. how they would be spinning
I don't even need your videos to show up in my feeds; though, they are now. I enjoy them so much I go looking for new ones on a regular basis and watch old ones all the time. Currently, home sick with the Rona, I'm on a binge. So much good content! Thank you Jeff, OG & Danny. I haven't seen Danny for a while. I hope you are doing well. My thoughts and prayers are with you.
Thanks Kevin! Recorded Danny's message last weekend and I'll post it pretty soon
The sight of Danny looking down the barrel the way he did gave me a hearty chuckle.
"If it fits it shoots" is your version of "If it compiles we release it.".
9:56 South Carolinian, born and raised, and I can attest to the fact that I have a pile of bricks and concrete blocks in a field behind my house. These bricks and blocks also may or may not be used as ballistic medium every once in a while! After a few testing sessions, I scoop up the pieces and fill up the pot holes in my driveway. True story! Not much left of that big brick in the video though. Yall made some nice dust!
Same here , born and raised, grab blocks and bricks from construction projects and they make great back drops for plinking.
I know someone who's name rhymes with your screen name!
Get 2 sheets of lexan or even auqa ply 3 layers each side and fill the gap with ceramic polishing balls for tumble polishers its self healing its a hobo version of the saab barracuda armour system they can stop 50bmg machine guns so a few 9mm or a days target shooting would be fine all you would have to do is replace the ceramic balls now and again you can also fill the gaps in walls in houses to stop op if you need to use a firearm indoors for self defence and are worried about over pendtration its so easy u could even just armour up the kids room because they aint cheap the ceramic balls i mean there an investment that definitely would save lives so u cant put a price on that can you
The 12 ga brass shell by Magtech are for black powder only, due to the baloonhead construction. Regular powder can be used after using a plastic insert or epoxy. Also need to use 11 ga wads/shotcup due to the thin brass.
Danny's skill at aiming off is excellent. Second only to the toughness of his shoulder taking that kick, dayum
Loading those heavy slugs must be real challenge. Nice job. btw, I really miss your off-camera comments.
Yeah, I thought something was different. We like your slowmo narrations.
Agree, the talking during the slow Mo ads.
Also I could do without the sound effects
Its stupidly easy actually
Danny's only one on youtube I've seen demonstrate hangfire properly in LONG time, thank you for showing that, Jeff.
could you please tell us more about those barrel harmonics? Do you think your camera could pick them up? I'd love to learn more! educational video, as always.
(that's right, CZcams. it's a learning channel!)
I was thinking the same thing. Would be awesome to see.
I second this.
This is an educational channel about the proper usage of high speed camera cinematography. We are just using volitile chemical reactions through a recreational differential engine as reference material.
Try looking up videos of barrel whip. I think that's what they are talking about?
You can actually see it a little bit at 4:30. Its not super dramatic but its pretty neat
5:00 Klein screwdriver. Some of the best ever made.
I totally agree
The metal shears are high quality 2
I learned the reason you kept that brass shell in the chamber when I was about 15 years old. I re-loaded my own shells, and one day my friend and I were out shooting when this happened to me. I was just going to eject the shell, when my friend grabbed the gun to prevent me from ejecting the mis-fired shell, and told me to wait. Sure enough, in about ten seconds the shell went off. Quick lesson that stayed with me my entire life!
If you had chopper blades on that bowling pin I do believe you would have had remarkable vertical lift. Cool shot Dan-o.
Dooo ittt
Those do fit a revolver.
HELLBOY'S REVOLVER!
yeah kksksksk
I was thinking the same thing!
@@WesleyMR_ hi wes!!!
@@annabellethepitty hello buddy with same name
I think the rounds for _The Samaritan_ are *_even bigger_* than that! 😂🤣
Good to see Danny back!
Thanks for putting out yet another awesome video- you guys are the best!!
InvolvedObserver Agreed!!☝🏻
Not enough duct tape on his hat. Maybe he has a bunch wrapped around his body? 😊
I shot and reloaded brass hulls for years. I loved them and never had any problems with them.
I Love being able to come back & watch these & see Danny doing well with a smile on his face laughing and happy. I miss him greatly......
Bob Ross had happy little trees, Danny has happy little slugs!
OMG now I can't see Danny lining up a shot without picturing him with Bob Ross hair instead of his signature hat. " Lets just put a happy little foster slug right here on this 30lb lead plate"
Can you imagine if they made Clear mags for a Saiga 12 shotgun?
A mag full of these would look Wicked !!!!!
-Mini- *Mega*-14
For a SWAT team in a city populated entirely by African big game
@Zach cash FOR THE EMPEROR
I still have to send you that slug....agggrr.. I have been busy. Going to send it soon.
Did you end up sending it?
@@pnp072000 fart booty
@ 4:40 I love the wide angle on this. I watched it about 5 times. The last two times I was just watching the recoil of the gun. INCREDIBLE.
South Carolina here, always happy to hear people are thinking about us. Generally not that happy to hear what they're thinking, but you take what you can get.
They sure got the energy dump. The brass hulls were meant for black powder to start with. Great video my friends. I seen the tracer video awesome job. GOD BLESS you all Amen. Be safe out there.
Ain't physics grand?!
Imagine how many would have loved the topic in school after watching this ?
Yeah well that's why rotc was cool because we learned this stuff
yeah, don't think I would use the brass casing and glad to see Danny is doing well.
Brass gives you highee pressure
9:55
I thought you guys brought out the anti gravity blocks on the left and right of the table. Lol
Ha
I just have to express great appreciation for this channel. Ballistics is an area of science that has been a huge interest of mine since I was a kid, and I've been watching TFM's videos from the beginning, and loved them all. Thank you, Jeff, Danny and OG and Breanna for the awesome videos - you guys are doing such cool stuff, and I'll never get tired of watching these experiments. Big love from South Africa!
The tangential hit on the bowling pin was dope🤪
only 10% percent of viewers gave a like? c'mon people support your gun channels. thumbs up.
Haha, that's average, even when I hint for people to just rate the video bad or good.
Amen!
There's also a chance it's a CZcams thing.
Your absolutely right, people act like it’s hard to press thumbs up! And gun channel especially need our support
Is there a go fund me to rebuild Dannys shoulder after firing those?
We can make him faster...
Stronger....
Patreon was built just for Deadeye Danny.
Are you prepared for them terries?
The sound I want to hear is the empty brass eject and hit concrete. I had some Russian copper 12ga shells and OMG the sound is just amazing. Clang chag ting ting. Just awesome
I really enjoyed watching your "elimination by tactical deconstruction" of that brick! 💥
Correct me if I'm wrong but I think the brass hulls are best for semi auto and automatic, magazine fed shotguns like the aa-12. As always thanks for the awesome videos Jeff and everyone :).
Actually they're mostly around as a novelty . Though the people who use the reproduction lever action shotguns like them too. Magazine fed shotguns are just fine with regular shells. I have put many thousand through mine.
@@GunFunZS Thanks for the clear up.
@@JoshuaHedgecock welcome. They are a lot more work to load, and usually need modified to work properly. The tools to size or crimp them are hard to find and costly too. I still want some.
Those slow motion shots are bloody great!! It's good to see Dan back and I'm checking every day to see if you've released anything new.
thanks!
Glad to see you back at the range Danny!
LOL, that bowling pin looked like a frisbee sailing to the ground so perfectly!
Just watched this again recently and saw Danny --- Miss him, as I'm sure you do. RIP Danny
Good to see you back Danny I heard that you decided to dabble in the medical field a little bit with a buck knife and duct tape lol all jokes a side good to see your back and healthy
Holy cow! Awesome!!!
Thanks guys this made me chuckle and smile. I needed this today
i used to make custom shotgun shells when i was preteen and teenager for skeet shooting and duck hunting ,boy was that fun .. then i got into muzzleloaders !! maxiballs rock . this round is nice !!
The ricochet sound was very interesting, I backed up the video and made sure I heard right the first time lol.
Welcome back Danny! Glad to See you're feeling better.
CZcams is screwing around with all my favorite gun channels
I'm always notified of your videos - and I live in the UK, where private gun ownership is low, but gun crime is all too common, and where simply chambering some of the rounds you shoot could get you in serious trouble. I love your videos - they're informative, fascinating, and fun. Great to see Danny back, too. What was that brilliantly sinister music on this video? You normally put the title on screen.
At 2.22, 2.23 mark you can see the bulk of the projectile leave the jell at the top slightly right of centre.
My first Rifle 12g single rifled barrel from the 1990 and still love to use it. 3in or 31/2in is 3in the best
Great video. I all ways love the humor and excellent marksmanship. I'd really like to see you send a couple gobbstoppers downrange. Maybe a giant jawbreaker core slug. Maybe over the summer i'll try and send my idea . even if it's a short video, I think it would be interesting. Thank you much, Jeff, Danny, OG, and all more involed than myself.
Thank you. 🔥🔨🔪
Brass shell almost sounded like a M79 Bloop gun
Bloop gun? Huh, I've only ever heard it called a thumper.
That is a bloody missile .
The slow motion of the bowling pin spinning was mezmerizing
The shot into the concrete was like a siege gun smacking a wall
South Carolina ballistics gel is fresh palmetto logs... ;)
Palmetto logs stopped British cannonballs .
@@victorwaddell6530
Trees in the palm family have more in common with grasses, orchids, and onions than they do with most other trees. If you cut one down, you'll see that there are no rings.
@@richard6133 That's interesting . I'm from S.C. and we have them along our coast , and on our flag as the state tree . Specifically , the Pineapple Palmetto . Sadly they don't bear pineapple fruit . The Palmetto on the S.C. flag is kind of our " Come And Take It " . Saw Palmetto is supposed to be good for male vitality among other things .
@@victorwaddell6530
We don't have too many of them here in the Upstate. They have difficulty surviving to the point of getting established, due to the cold of winter and the high clay content of the soil. However, once established, they do generally survive well.
Danny, glad to see the DIY gall stone removal did not do you in... Awesome shell and video guys.
Things I didn't realise before today: Danny has more hair than a beard. I'm not sure what I thought before, but it's always been beard and hat and I've been content. Way to mess with my head.
Ok the star wars background "stay on target" was funny as hell 😂😂😂🤣🤣
Interesting video. Danny had a major flinch after that misfire.
Nice to see you again Red... happy to see you can still shoot. Loll
Some farmer in Chowchilla just found out what a .73 sounds like hahahaha
I don’t know if this is his first appearance back or not, but WELCOME BACK DANNY!
It's amazing how quickly it knocked down that lead plate -- all that mass instantly turned horizontal/flat.
Back in the 90s I built a bunch of brass shells with round nose slugs for a mossberg bolt action 12ga rifle, the leather bandolier really looked impressive, these days I just have to settle for 405gr jhp 50-110 or 50 Alaskan,,,stout recoil out of 1886 winchester on both,,,
I love this channel. The concept is so simple, but so satisfying.
thanks jay!
Danny is always the right man for the job 😈
Danny!!! Good to see you back. Was getting tired of watching OG put his finger in holes.
BOOM!!! That energy dumped in the first round was tremendously awesome!!! Lol. 🥰💕
This one’s very captivating. The music has me on the edge of my seat every shot. 👊😁👍👍
And what a grand Finally 😊👏
Way cool. At what point does a smokeless, over 50 cal bullet in a rifled barrel become an ATF issue? Hopefully never. Thanx.
Up to .50 is fine. After that, you need a destructive device permit from the BATFE. Anything 20mm or bigger is military only.
Thanx, I wondered about that@@hihu7200
@@hihu7200 you can get DD permits for 40mm grenade launchers. You can even get the DD permit for tank cannons, which are larger than 20mm.
@@hihu7200 Anzio Ironworks makes 20mm rifles that are available for public sale.
Danny you're back brother!!! Some great shooting coming!!
I'm going to have to start actively checking your channel every week to check for new content. I had no idea youtube was doing this to you guys. Stay fresh kings.
The slomo shot with danny was truly awesome. Great job and shot!
That last shot was like freaking cork gun haha. That delay and the pop. Made me question what kind of barrel pressure it was dealing with
What a energy dump, really surprising it stuck in that pin
It basically deflected the round, directing all the energy into spinning it like that, If they had something like say a vice holding that pin, it would a blew it to pieces.
Hi! Great video and glad to see Danny is back! Btw. your vids do popup in my feed. Most likely because I try to leave a small comment under every episode.
there is a revolver for that and it`s russian! It is called Мц-255-12
Those gel blocks reminded me of my teens when I suggested we have family day this Sunday. ;)
Has Danny ever caught one of those ejected shells? Don't stop tryin'! Love your stuff guys!