Omron PLC Lesson 3- Rising and Falling Edge using Memory Bit

Omron PLC Lesson 3- Rising and Falling Edge using Memory Bit
✅ Use the coupon code🔥CZcams 🔥to get 20% discount on the course Learn Omron PLC Programming available at codeandcompile...
For daily/weekly updates follow us:
📸 Instagram: / codencompile
👩‍💻 Online School: www.codeandcom...
📑 Wiki: wiki.codeandco...
🌍 LinkedIn: / code-and-compile
Cheers,
Rajvir Singh

[@ajitsingh-wx4tm]

Thanks sr
Very very helpful video

[@jeremyadair5780]

Your logic design makes electrical troubleshooting extremely difficult. In my industry all switches are wired normally open. and pressing it passes power/common depending on positive/negative wiring logic. By wiring your switches in normally closed it takes much longer to find a loose connection. If every button is Normally open you can quickly check with a meter without opening the prints to troubleshoot. We would use our reset in the latch branch because it resets the latch and is not a condition to turn on the coil. It just makes it easier to read.

[@abcrectify6916]

Jeremy Adair if all the switched are NO then all the switches contain a relay to on and off the system and. I also work in electrical and electronic industries

[@ajayijral]

Gud One Rajvir.....keep refreshing with such fundamentals.......thanks......

[@thegeterrdone]

Your welcome Ajay!

[@rfbraunjr1]

Rajvir,
The questions should use the word "Devise" instead of "Device". Devise a circuit that comes on when.....
Love your videos so much. thanks.

[@thegeterrdone]

Thank you Ronald for your concern in the word "Device". Appreciate you!

[@reshadrei1788]

sir kindly continue the topic, please discuss about time and counters, hoping i will learn more for my project which deals running 2motor alternatively for 1hour during day time and 3motors for night time, thanks in advance
and God Bless

[@thegeterrdone]

Hey Baby Nash - We have complete course of 150+ video tutorials for $49 available at www.nfiautomation.org. !

[@gitanshpal2592]

Dir can you please video for plc comparison

[@jonstafford7952]

Hi Rajvir really enjoy your Omron videos, are there any more? I have used the cp1 unit. would like to see how to connect a quadrature encoder to the CP1 and program the high speed counter. thanks for the videos

[@thegeterrdone]

Hello Jon Stafford - I never tried encoder with Omron PLC. But sooner would be adding a video tutorials on that. Stay Tuned to our channel.

[@Krydolph]

finally getting to the place where I start need some help, and he stopped makeing them :(

[@johnnysbond]

Hello mr Rajvir . how to configure the inputs to the encoder and which block use? you could make a video lesson on this

[@thegeterrdone]

+Johnny Almeida Rodrigues We will make a lesson on Encoder soon. Thank you for feedback.

[@johnnysbond]

thanks for listening.

[@sweet2k4]

Hello mr Rajvir, Is there more tutorials with cx-programmer in the online course? im more then happy to purchase the course if it is.

[@thegeterrdone]

+Magnus Ewerlöf Dear, there are 230+ Video lectures in the full course. Please check the curium before buying here: www.udemy.com/nfi-plc-online-leaning/?couponCode=nfiautomation_website

[@thepoemfreak4846]

sir I have a problem on TIM command on my CP1E ... please help me...how to us timer output to work?

[@thegeterrdone]

Dear Kamal, there are Timer tutorials available in paid course. Would you like to explore it? Here is the link: www.udemy.com/nfi-plc-online-leaning/?couponCode=Website2016

[@ram2848]

Hi, I am having CP1E-NA-20DR.. In cx programmer which address i need to put to get the analog data from 90 ch and 91 ch.. thanks in advance

[@thegeterrdone]

Ram Subbu I can tel you if you can share the manual of this PLC please at [e-mail]

[@ram2848]

I got it ya. . Thanks for your reply

[@abubakarsiddique7795]

sir, I want to complete the paid online version of the course. I mailed you as well. Waiting for your reply.

[@thegeterrdone]

Hello, kindly send email at [e-mail]. Thank you for your feedback. Subscribe for more upcoming videos :)

[@abubakarsiddique7795]

@@thegeterrdone already bought ur course sir...and daily learning from your videos

[@abdullahshattel582]

where is lesson 4

[@abdullahshattel582]

I cannot find lesson 4

[@abcrectify6916]

How can i get the software of omron plc license free

[@thegeterrdone]

There is no license free software

[@abcrectify6916]

Rajvir Singh sir from where i can get this software because i need 64 bit version

[@anoop22march]

what is memory bits in s700

[@thegeterrdone]

You mean M1400? as Micrologix 1400?

[@anoop22march]

Rajvir Singh Simatic S1400

[@thegeterrdone]

Sorry, i have no idea.