Brother HL L2350DW Replace Toner Error Menu Bypass Settings Fix | Laser Printer Troubleshooting
Vložit
- čas přidán 11. 09. 2024
- In this video we turn off replace toner to continue mode on the brother HL-l2350dw. This setting will fix the replace toner error when your printer stops working but there is still some toner left. super annoying from the factory but you can fix it with this laser printer troubleshooting fix. I recommend changing this setting as soon as you get the printer but you can do it also when you get the replace toner message on you brother printer. This will work with other models such as Hl-l2340
★ Important Links ★
Mega Tutorial - • Brother Laser Printer ...
Replacement Toner (if you need it) amzn.to/2X2zjhZ
Oem Toner - amzn.to/3ob44xd
Toner Refill - amzn.to/3hOA1cB
The links in this description are amazon affiliate links, at no cost to you a small percentage of the sale will help support the channel if you buy through these links. These funds help to buy more printers and do more reviews and compatibility tests. Thank you =)
You are a life saver. I was trying to print the last 7 copies of a final exam for my class the next day when my printer stopped printing and gave me the 'replace toner message'. I tried putting in 3 different cartridges, some of the partially used, but the printer would not accept them. Thankfully, I found your video around 1:30 am, and I was able to print the remaining copies.
If you cannot get to general menu: unplug the printer and wait a couple minutes. Plug the printer back on and you should be able to get to the general menu. Worked for me! Thank You! Now i can print a shipping label!!!
Thanks for including this tip. After restarting my L2350DW, the menu was toggling between the main setup and the "out of toner", and it took a couple of timely hits of the Back button to get it to get into the main menu and then I followed the instructions in the video to change the setting for toner to "Continue". Presto, can print again (with good amount of toner left)!
Wow. Was getting the Replace Toner error message, bought and installed a new cartridge, and continued to get the message. Found your video, tried it, and it worked. Popped my old cartridge back in just for fun, and whaddaya know...the old one is perfectly fine. Gonna use it until it's actually out. Thanks for saving me some money!
The printer was a bit complicated to hook up czcams.com/users/postUgkxciSwynMJ7PnUvvx11rewiu-yFBkZTl53 but it does the job very efficiently. I like the ink wells versus the ink cartages that cost an arm and a leg. It prints quickly and the quality is excellent. It shuts off when not in use, so you have to remember to turn it on. Overall, it exceeds my expectations. I'll update my review in a couple of months.
This video alone deserves subscribers. Saved me a lot of hassle and money!
Literally subscribing for this video, Im pretty good with technology but i couldnt get this stupid error message to go away!
This fix worked perfectly. I loaded brand x toner ($ 50 less than Brother). Nothing worked - until this fix - and now I'm back to printing......The college picker - you are the man. Thank you!
You are welcome 🤝
WOW! You are the only one who actually showed me how to fix this problem! I've watched so many videos claiming they could help but the printer simply wouldnt print and said replace toner - when my cartridge was still half full! Thank you, thank you, thank you!!
Happy to help 😊
Thank you so much. My printer claimed the toner was gone after less than 100 copies! Presumably it's no accident that Brother tries to coerce us into buying more toner long before we actually need it.
Thanks dude. This worked a treat when my printer kept complaining about replacing the toner, even though I’d just recently replaced it
Stuck on replace toner. Had to find another video explaining how to get to the menu by holding down go + back for a few seconds and then pressing the back button. Then I followed your steps. Thank you 👍
I had to unplug mine....it was the better choice...almost through it agains the wall.
I have a Brother HL-L 2400 DWE and after ordering what were advertised as compatible toners I reralised they wouldn't fit, and I was going to have to " bite the bullet " and pay for the expensive brother original toners.
Found your tutorial and it worked! Thank you so much from the other side of the pond 👍😎
You’re awesome. That unlocked it for me in a second! It wasn’t even printing light yet! You’re to the point too, which is rare with these videos. Thank you for that!
You saved me hundreds of dollars over the life of the printer. Thank you
Thank you, thank you, THANK YOU!! What I love most about this video is that it's not a temporary fix like the others - it fixes it permanently so that it doesn't recur.
You are welcome. Happy to help 😃
Super helpful! My printer wouldn't recognize my new toner cartridge and this did the trick. Thanks!
I have a Brother HL-L2370DW and your tutorial worked for me. I like to use a toner cartridge until the very end so I thank you :)
OMG, thjat completely saved me. Needed to print off the end page of a contract for signing, and the bloody thing decided not to work now.... and with your video, I got it printed, so thank you very much for that.
Very clear and sorted a problem where it refused to accept a brand new Brother cartridge. At first it only worked via airprint on my phone but got it working on my PC as well by restarting the PC.
Thanks this hack worked on my old HL-L2315DW. I changed printer cartridge to an off-brand and the low toner error message continued from the last cartridge. Hard to justify buying OEM cartridges when the printer went out of warranty ages ago.
Your post continues to be very useful. FYI I had the replace toner message come up, and tried a few times to get the message to go away so I could access the setup menu. I eventually found if I switched the printer off and restarted, I could access that setup menu. Then followed your instructions, and Bingo! All good. Thank you.
Thank you for the perfect hack! It worked and I even got to reuse my old toner which apparently wasn't that empty yet and my new one is now on reserve... salamat nga madamo!
It worked perfectly, thank you! It prints perfectly, is amazing how Brother is stealing its customers... what a shame of a company
Thank you! p.s. I have a HL-L2375DW which had exactly the "replace toner" issue stated in this video. Your instructions worked perfectly.
Thank you so much! BTW, this worked with my MFC-L2750DW, using a slightly different menu setup. But the logic was still the same. My printer continues to print crystal clear text and images using the old toner cartridge.
I watched at least 10 different videos to try to fix this problem, and yours was the only one that worked! Thank you!!!
Thanks you. Please give it a thumbs up so other people can find it easier and save them 9 videos 😂
Damn! Thank you. You fixed my problem. Followed your instructions. Just printed my documents. I was desperate for a week. Thank you.
This video saved me today. My brother printer was giving me problems with new toner. This video saved me in time.
Happy to help 🤝
You're a life saver! Had a project to finish but the printer wouldn't let me despite the toner being full still. This worked like a charm and can continue working, thank you so much
This worked perfectly for a Brother HL-L2370DW series!!! You the man thank you!! God bless you
Brilliant. This guy deserves a gold medal.
🏅👍
I was looking for a way to (Fix Menu Replace Toner) when I found this link. I had not come close to 1200 start up pages but would no longer print I installed a E-Z Ink (TM) Compatible Toner Cartridge, and It still said replace toner even though it worked. So I followed your instructions (Way to Speedy) and had to replace a bunch of times. In any even I took out the E-Z Ink (TM) Compatible Toner Cartridge and put back the brother toner and now it works. I don't really need a message when I need a new toner as it is clear or faded away, Thank You!
AWSEOME YOU SAVED ME A LOT OF TIME TRYING TO FIGURE OUT WHAT WAS WRONG WITH PRINTER
You are welcome
the comment about unplugging it for a minute to get access to the menu was key. thanks for the video
This works!! I tried lots of videos that did nothing and this one wins! Thank you!
This video is so helpful! Plus, the shaking the toner tip helped me get another 400 pages after I turned off the setting! Thank you!
You are a LIFESAVER! I have the 10/15 tax deadline coming up and was printing the final pages. THANK YOU!!!!
Had to adapt the instructions a bit based upon my model, but then I found the Continue button and voila! I can print again! Thanks!
Thank you for the information. I had been messing with this for an hour and came across your video. Thanks again.
this is great; thank you. i have had occasion to look at this video several times.
i am using this printer on a mac. every time apple upgrades the operating system, i find i have to re-set the printer using this method.
Happy to help
THANK YOU!!!! I'm back in business today thanks to you!
Happy to help 🤝
Thank you for this... I've used this video to fix my printer twice now!
OMG! this fixed my problem in seconds after my printer FRUSTRATED the heck out of my day! Ready to drop kick it!!! Thank you Thank you!
You are welcome. Saved your toe 😅
Very short and simple.... Excellent
Thank you, thank you! The toner timer is a devious waste of perfectly good toner and a way for the company to sell more cartridges unnecessarily. I’ve looked up several methods for resetting the toner timer but they have not worked with my present brother copier, MFC2710. Your procedure works to turn the whole blasted thing off.
For anyone trying to solve this issue, I recommend direct connection to the printer with the device you're trying to print too... as for me, it kept showing "offline" do to no printer toner... once I've connected with cord (with drivers installed from the brother website), viola. Back to printing again, as my ink was never really empty... but without a cord, i had no success till i used a cable.
I tried this method for continuing to no avail as well as the usermode reset: holding go button while turning on printer for 3 seconds while the toner door is open... after letting go of buttons then in usermode hitting go 9 times, once wifi button blinks, hit go 5 more times then closing cartridge door... still no avail.
Cord ✅️ = success🙌
It's work!❤ Thanks a lot!!
@alexvolodarsky8103 Glad I could help!
Worked like a champ for me. Thanks so much!
Thanks everyone! I got mine fixed!
Thanks man managed to solve the problem with my mum’s printer, had been tearing our hair out until we found your video!
You are welcome man. Happy to save her hair 🤝
OMG. You saved me. I just couldn't get the printer to work even though I had just changed the toner. Now tell me, please.. how do I reset the drum counter. I changed the drum but didn't manage to set the counter back to zero. Help if you can!
Hi, You help me to save my Job,. thanks for this kind of video.
You are welcome sir.
Thank you man. You really really helped me. Thanks again.
This video saved me a fortune!
Thank you! 😊 mine keep saying replace former or gonsuscription but now still
Printing!!!! Thank you so much brotha!!!
Thanks so much!! Your instructions made my day.
After you come to the "accept" and hit OK, then the message reverts back to "replace toner"...should you then select OK again? Didn't work for me.
So glad to find this, thank you! But its still not working. I've done the reset process as described in the comment below. And shut down a few times. And checked its set on Continue *, but is still saying No Toner..... any other tips or could this be a faulty new toner cartridge ?? I don't want to pay the authentic brother cartridge cost..... thanks for your time if you get a chance to reply
I am having the same situation. I replaced with a brand new generic toner. Does it have anything to do with it not being an OEM toner?
Thank you! This worked for my model, too.
Thank you! Easy & effective.
Awesome Simple technique to fix great thanks to you brother ❤🎉
Thank you. Couldn't print by boarding pass... your tip worked. That is a really shitty feature Brother set as a default. They pull that crap with non-brother toners also. I had a problem with the printer not recognizing the third party new toner but there is a fix for that too.
Happy to help 😁
Many thanks! Nothing else helped. This was clear.
Any advice if this doesn’t work? This seems help everyone but mine still says no toner, insert printer cartridge like it thinks it’s not physically there
OMG! Thank you sir! You just saved my life!
Thanks Brooooooooooo Seriously i was wasting money...
Many thanks, this worked for the DCP-L 2530DW
Genial. Gracias desde España. Funciona!!!!!!! Thanks from Spian. It works!!! Thanks so much!!!
Life saver. Really appreciate your content
Omg thank you! this worked on my MFC-L2710 just a slightly different lcd but same words. Same as you I know my toner is low when the pages start turning light.
You are welcome 🤠
Definitely a game changer! Thanks so much, appreciated ❤
THANK YOU BUDDY, YOU MAKE MY DAY!!!!!!
Thanks for posting, very helpful 👍👍👍
Worked perfect. Thank you!
I get it ... Brother wants to sell me MORE toner more often. Thanks! I really don't need their help!
Thank you so much!! Very very helpful!!
Hello do you have a solution for a HL-L6210DW
I had a HL-L6200DW and it worked to reset the toner but I can't find anything on the new printer
Thanks, dude! Baller tutorial that worked immediately.
Thank you very much! You helped us to save money!
Thank you a ton.
Wish everything on the Internet was as helpful as this video.
😂🤝 I appreciate the kind words
You da man! Worked. Thanks! 😁
Thank you so much this was perfect!
Thank you very much for the shared information. It helped me a lot. :)
It worked, thank you for your help!!
Big thanks: you are an expert!
Happy to help
Thanks, that was a lifesaver!
Thank you So much!! You fixed my problem. subscribed!!
AWESOME!!! THANK YOU SO MUCH!!
Great thanks so much worked like a dream
Thank you so much for your easy directions. It worked perfect.
You are very welcome ☺️
You are a saint. Thanks a lot for that one.
I went from zero to hero in 3.5 sec un my wife's eyes with that fix!
Lol that's awesome 😎
Mahalo! This worked and it saved our day!
Glad it helped!
Worked! Thanks for the video.
Amazing fix--message "replace toner" changed to "low toner." My printed pages had not yet gotten lighter. What a system, wasting money and adding more waste.
Glad to have helped 🤝
Thank you so much for sharing this tip.
Super helpful. Thanks
Amazing! Thank you!
Worked for me ASAP. Thanks!
Short and sweet
Works on HL-L2390DW as well, Thanks!