A good thing to notice is if you don't see ''unpack data'' button, be sure that you have enabled the content manager developer mode. You can do it by going into the ''about'' tab, then clicking 10 times (just spam click it) on the Version: 0.XXXX (whatever the version) until you get a popup asking you to enable developer mode. Have fun !
I followed your video step by step,and i finally have 4 eye Foxbody that shreds hard,i cannot thank you enough with this.It was my first try,and came out flawless
Thank you! I was able make a balance BoP GT4 car. Something worth pointing out, you made need to adjusted the colliders.ini height. My car kept bottoming out when I drive over any curb. I first though the suspensions was too low even after I copy everything, but copying the colliders.ini file fix it, which wasn't mention in the video.
Next time if you could share your knowledge on how to make tires. Like what values to change to have more bite etc, too much drift mods on AC have very little front bite.
Brilliant tutorial. I now have a rally setup on a drift car lmao I do have a question however. The power definitely hasn't been updated. It drives fine, the engine makes the right noises. Just not the same power. Any thoughts?
I did everything correctly and the car works and everything but once i get to full lock the front wheels sink into the ground and the wheels are gltiching through the hood. do i need to change my steering lock or what?
I downloaded a physics mod for the Formula Renauld 2014 car which is a .rar file just called "updateFR35.rar". How do I add that to my car? Content manager won't accept it.
great tutorial! Everything worked well but the sound is kind of weird... when i go full throttle the speedometer shows that i'm at full rpm but the sound does not match.. i swapped the sound from the donor car since this car does have the exact same specs?
Hi,I tried to swap physic and I have little problem,I dont have engine sound after swap,something I could make wrong I made everything like u in the tutorial
I did everything you did in this video and it doesnt work. Tried it a few times rewatched the video a few times and game still says that carbis damaged and LODs list is missing. I want to swap physics on BangerJP 180sx because I cant get it to work like I want to. Please help if anyone has experience with this car pack. Thanks
I'm trying to transfer the wdts ze86 physics onto the street heroes levin but the data folder of the levin is highly incomplete. Half the files are missing. Even the original car doesn't load properly due to some lod list missing. Have you ever encountered this kind of troubles?
Hello, I have done eveything to the point where you say to go into the ingame to see how the car acutaly looks like but when I go in I cant drive it it says Setup Invalid. Click to Check Again I tried raising/ lowering ride height but that didnt do anything. Not sure what to do.
Very helpful video, but ive got a problem. After all changes when i load a car in practice mode, my gloves and helmet are plain white, why :( ? In skins folder everything seems okay
AWESOME!!!!!! I managed to get this to work up until the graphics part. Whenever I make adjustments to it's graphics I don't see any changes :( Any idea what I could be missing?
I've copied everything exactly how you said but the "final" car still has traits from the original one. For example, i tried swapping a VeilSide RX-7 with the DW RX-7. The VeilSide one is trash at drifting and has a bit of deadzone and spins out a lot. The DW RX-7 is perfect to me. After I was done copying everything, this final VeilSide RX-7 was better at drifting but still had those steering traits as the original one. Sorry if this comment is wordy but idk how to explain it properly. Please help.
I changed my KN5 file to make my 350z a roadster and now it previews as black. What did I do wrong? All I did was adjust body lines and replace the original KN5 file
How would I retain the wing animations? I swapped over the physics from the SRT Tomahawk VGT without the wing animation since it was more true to the actual car from Gran Turismo to one with the wing animations but came with terrible performance, the performance swap worked perfectly but the wing animations with the flaps and everything no longer work, if you know how to fix this, can you please tell me how to do it?
Hi bro,how to solve the bottom of car hit the road and produce sound and spark?how to increase the height to prevent this because graphical not solve this..please help me
A good thing to notice is if you don't see ''unpack data'' button, be sure that you have enabled the content manager developer mode. You can do it by going into the ''about'' tab, then clicking 10 times (just spam click it) on the Version: 0.XXXX (whatever the version) until you get a popup asking you to enable developer mode. Have fun !
hey does this mod work for you? im waiting for your reply and gonna ask some questions if thats fine
thx
@@wanna6e hey does this swap physics thing work for you? reply if it does
thnx bro
Thx
This is sick! Finally I can have WDT physics on sexy cars with previously shitty unrealistic physics
I followed your video step by step,and i finally have 4 eye Foxbody that shreds hard,i cannot thank you enough with this.It was my first try,and came out flawless
where'd you get a 4 eye model?
thank you fella been looking to do my 87 ford escort rs turbo physics for ages and now i can. keep up the good work ;)
Thank you! I was able make a balance BoP GT4 car.
Something worth pointing out, you made need to adjusted the colliders.ini height. My car kept bottoming out when I drive over any curb. I first though the suspensions was too low even after I copy everything, but copying the colliders.ini file fix it, which wasn't mention in the video.
Next time if you could share your knowledge on how to make tires. Like what values to change to have more bite etc, too much drift mods on AC have very little front bite.
Finally! Finally I can enjoy simdream mods! 😭
No, I still can't, I did everything the video said and the car still drives like shit 😔
@@NoSeQuePonerAaa I've had to start over a couple times.. it's all in the small details.. also, after swapping, delete the packed data
@@NoSeQuePonerAaa meldus did a video and it worked for me it was easier
You deserve Alot more subcribers!
Appreciate that!🙏
Can finally put Tsujigiri tires on all of the pro cars! Thanks so much!
Sure glad I found this video! Thank you for the explanation.
Guy you deserve more credit my dude
Thanks for this video! Easy to follow and success is guaranteed! Thank You!!!
i didnt think a 3 year old tutorial would work but i followed it and made a crazy miata
I want all my cars to handle like the Paul Walker Supra i downloaded. That car has perfect race to drift simcade balance.
Awesome Upload buddy :) 🔥🔥🔥🔥
Excellent video! Thank you !
Cheers man! This means sooo much!
Brilliant tutorial. I now have a rally setup on a drift car lmao
I do have a question however. The power definitely hasn't been updated. It drives fine, the engine makes the right noises. Just not the same power. Any thoughts?
drag power.lut to your new car folder from the rally car
Thanks for saving my rotten cars
cm says failed to decrypt data and my car in game is blue and crystally
I did everything correctly and the car works and everything but once i get to full lock the front wheels sink into the ground and the wheels are gltiching through the hood. do i need to change my steering lock or what?
I downloaded a physics mod for the Formula Renauld 2014 car which is a .rar file just called "updateFR35.rar". How do I add that to my car? Content manager won't accept it.
why won't it tell me the speed of the wheels when I burnout the car but the speed of the car, and whether it can be adjusted
great tutorial! Everything worked well but the sound is kind of weird... when i go full throttle the speedometer shows that i'm at full rpm but the sound does not match.. i swapped the sound from the donor car since this car does have the exact same specs?
thanks, I just copy and pasted the physics
After giving the RSS Hybrid 2021 physics to my SimDream mod, the front wheels of the car are gigantic. That's so weird.
my RSS hybrid 2022 didint even load and said "driver model probably missing"
@@IshutoutI re-download helmets
great video mate, thanks!
one thing to say, it doesnt work in kunos cars and legion cars, or thats what happend to me, so is what i know, its a tip
Great tutorial!
what did I do wrong if my car has no steering wheel :D cannot even steer at all it just goes straight
Hi,I tried to swap physic and I have little problem,I dont have engine sound after swap,something I could make wrong I made everything like u in the tutorial
My tires don’t move live in the showroom when I edit, can someone tell me why?
I follow everything! it have lots of errors (ac/ setupscreen, loadini, escmenu, sim, splashscreen,game,onidle,run,acs,wwimain,tmancrtstartup)
cant launch the race sammit_s15_yashio_factory is demaged LODs list is missing HOW DO I FIX THAT PLEASE REPLY QUICKLY
I did everything you did in this video and it doesnt work. Tried it a few times rewatched the video a few times and game still says that carbis damaged and LODs list is missing. I want to swap physics on BangerJP 180sx because I cant get it to work like I want to. Please help if anyone has experience with this car pack. Thanks
About to try this out now
help! i swapped a wdts 180sx into the kunos rx-7 spirit and the hp LOWERED?? it can drift but loses power mid corner fast. pls hepl
I'm trying to transfer the wdts ze86 physics onto the street heroes levin but the data folder of the levin is highly incomplete. Half the files are missing. Even the original car doesn't load properly due to some lod list missing. Have you ever encountered this kind of troubles?
Hello, I have done eveything to the point where you say to go into the ingame to see how the car acutaly looks like but when I go in I cant drive it it says Setup Invalid. Click to Check Again I tried raising/ lowering ride height but that didnt do anything. Not sure what to do.
cant clone the car, keep getting the error msg. can you find a fix for this?
When i try to load in, it keeps saying race cancelled?
My car has its wheels poking out sideways by about 6 inches. Any idea how to fix it? You did not seem to cover adjusting this.
Very helpful video, but ive got a problem. After all changes when i load a car in practice mode, my gloves and helmet are plain white, why :( ? In skins folder everything seems okay
if you have all the right textures and they're in the right format then idk, i haven't seen that yet
i can get the car to look good in cm using allign to data but on track it looks completely wrong can anyone help me?
I lost the sound of the car and nothing seems to help, whatever I do the car doesn't make any sounds, did someone else have this problem?
what do i do when it says "driver model probably missing" as a crash messages while opening the game?
AWESOME!!!!!! I managed to get this to work up until the graphics part. Whenever I make adjustments to it's graphics I don't see any changes :( Any idea what I could be missing?
same, my car looks like monster truck but no matter what value I put in the graphics offset nothing changes
Isn"t there a much easier way to swap the car skin?
I've copied everything exactly how you said but the "final" car still has traits from the original one. For example, i tried swapping a VeilSide RX-7 with the DW RX-7. The VeilSide one is trash at drifting and has a bit of deadzone and spins out a lot. The DW RX-7 is perfect to me. After I was done copying everything, this final VeilSide RX-7 was better at drifting but still had those steering traits as the original one. Sorry if this comment is wordy but idk how to explain it properly. Please help.
I changed my KN5 file to make my 350z a roadster and now it previews as black.
What did I do wrong? All I did was adjust body lines and replace the original KN5 file
Mine previews as rumpled tinfoil.
I tried this with an encrypted model and it didn't work, just FYI for anyone else trying.. car polygons were all over the place
Hi, one of my cars that I had already modded before does not have an unpack data option now, can you tell me how to fix this. Thanks.
MY R31 HAS STEERING ANGLE NOWWW, YAYY
i'm trying to change the car's downforce physics so the car sticks to the ground well. can anyone help?
i love you broooo my hero
hey, ive done everything but the physics are still the same? like the power has improved but the handling is still the same
my wdts pack is locked :( do i have to nosey before installing it to cm? x thanks for the video x
i cant use my car because its saying setup invalid?
any ways to fix that?
when i go to showroom i cant see my car clearly anyone else got this problem?
How would I retain the wing animations? I swapped over the physics from the SRT Tomahawk VGT without the wing animation since it was more true to the actual car from Gran Turismo to one with the wing animations but came with terrible performance, the performance swap worked perfectly but the wing animations with the flaps and everything no longer work, if you know how to fix this, can you please tell me how to do it?
Link to mod?
bout to make the z4 gt3 with an 86 body
hey mate i copied the controls ini but the steering is inverted how do i fix this?
Have the same problem here, when i try to play the car, the steering wheel is inverted.. idk how to fix it
@@depressedcat2282 i gave up 😂
@@diddynator5817 i would asume to go back to the original values
He mentions in the video about this at 5.05.
@@yeahrightmate yeah i copied the controls properly
Hi bro,how to solve the bottom of car hit the road and produce sound and spark?how to increase the height to prevent this because graphical not solve this..please help me
Well if it’s hitting the ground raise it so it doesn’t hit the ground
you will probably need to adjust/raise the ground collider via colliders.ini
i take it that the s15 is your favorite car
On the JDM side; the s14 kouki is, but the s15 is a CLOSE second.
welp my steering is inverted and i dont know how to fix it
ever figure it out?
I LOVE YOU
how to graphicly lower the car
what if the car does not have a data file?
how do we edit the camber angle?
the model does not move visually...
hello man engine Stroke? rb26det
Gearbox too ?
how adjust where the wings are?
found it in aero settings if somebody is facing same problem
@@AleksandrRudiak ok a car doenst have aero how do i give it aero
@@yurtle13x oh man idk
How do you adjust just the front wheels foward or backwards?
Wheel base in suspension.ini and graphic offsets in car.ini
you need to be way more clear if you want to make tutorials. brushing over and assuming prior knowledge makes for a hard to follow tutorial.
When I save the file why doesn't it automatically update in the show room?