Open Channel Design in Civil 3D

Open Channel Design in Civil 3D - FREE ONLINE LESSON
Who Should Attend: Civil engineer, civil designers, drafter, modeller, builders, MEP engineers, infrastructure drafter, and Civil 3D user
The open channel collects stormwater and occasionally sewage before draining it into lakes, rivers, or irrigation canals for farming. found in both small and major urban, as well as rural, coastal regions, where the sea’s tide often has an impact. The design of the open channel is actually based on how the open channel is going to be used.
In this lesson, we will show an example of how to create an open channel design in Autodesk Civil 3D
Join Next FREE Online Lesson
acadsystems.com/event
For more info, Call: [phone] (Kuala Lumpur), [phone] (Penang)
#acadsystems #autodesk #open #channel #design #civil3d #premiumtraining #aec #aeccollection #AutoCADSpecializedToolset #autodeskgoldpartner #autodeskauthorizedtrainingcenter #autodeskauthorizedcertificationcenter #autodeskmalaysia #TrainingCentre #AutodeskCertified

[@DawoodSabir-mw1rr]

ماشاءاللہ

[@camilomarquez8229]

Great demostration. Just one comment
You did not see the combined surface correctly because of the order in which you pasted the surfaces. If you go to the operation definitions and change the order, you will have a better-combined surface. Everything else was pretty clear and straight to the point!
Please keep them coming!

[@acadsystems]

Thank you @camilomarquez8229 for the comment. We will take note of that. Let us know what other video are you interested so we keep on making them.
Subscribe to our channel and share this video to your friends.

[@halimkhan8789]

Thank you very much for your wonderful tutorial! Learnt a lots! Allah Increase your knowledge!

[@acadsystems]

You are most welcome. 😊

[@khamphanhchittavong9507]

Dear professor
Thank you, it is a great lecture

[@acadsystems]

I'm glad you like it😀

[@suhayab]

assalaimu alaikum iam abdi from Ethiopian student i need full irrigation project design from A to z which means the start point to end point madam shall i get it

[@panicellu]

How can I change the insertion point of the subassembly to the bottom? I cannot see correctly the profile

[@acadsystems]

Hi @panicellu . The insertion point for subassembly can only be changed if you create the subassembly from polyline.

[@obikingsley4773]

Could you please drop the data here for practice purpuses

[@acadsystems]

Hi @obikingsley4773 , unfortunately, we can't share the data. You can rewatch the video to follow the tutorial.
Please like, share, and subscribe to our channel. Thank you.

[@zar71TOP]

valavga

[@DawoodSabir-mw1rr]

ماشاءاللہ