Thank you. Thank you! THANK YOU! I purchased the same 8 Track cassette twice. First one I opened and tried to rewind I ended up ruining the tape. When I got the same tape the second time my player ate it. Determined not to loose out twice, I found your video and was successful in saving the cassette. 😉
Okay Mr. Fancy Schmancy "splice block" which side does the splice tape go on? The outside where the tape head can read it or on the inside where you can't see it? I got me a humdinger on Ebay that's repairing everybody's tapes this way and we're running into heaps of trouble here with tracks sounding funny.
The foil splice goes on the side of the tape that contacts the head. Sorry I am just responding now (a month later), I am just now seeing your comment.
I got the splice block from a chap named Troy Ohelo in the Facebook group 8 track fixation facebook.com/groups/1866892219991935/?ref=share&exp=3bcf I hope this link helps
I didn't quite catch what you said about your source for the new pads. Is it a standard 8-track replacement part, or is this something you're getting from Home Depot or a hobby store?
The pads used here are from weather strip. I don't remember where I bought this but as long as the weather strip isn't too stiff, any brand from any hardware store will work. The softer the material is the better. You can also use quarter inch thick sponge cut into quarter inch width. If you are looking for proper pre made pads, you can try 8trackavenue.com
Is there any reason why I have to open the tape to replace the pressure pad? Is it bad to just cut a pad into two pieces and put them in place? That's what I've been doing when the cart is finicky and I can't get it open. Just cut and stick it on.
Sorry for the late reply. I hadn't received any notification of your comment. Anyway, I don't think it's overly necessary to open the cart to change the pressure pads. Your way also works too. I have changed pads with the same process that you have mentioned
If you get a pair of snap ring pliers from the hardware store, they'll open up any cart. I got a pair and it's an absolute life-saver. The carts with the 5-clips were a major pain and the ones that are glued shut were impossible, but after getting that tool, it's now smooth sailing.
Do you know why one of my 8track tapes is worbly? It goes in and out of tune and speeds up and slows down. I’ve tested other 8 tracks and they sound fine, so it leads me to think it’s a problem with that specific 8 track tape and not the 8 track player.
Sounds like your tape is wound too tight. This happens often when the fast forward function is used on players equipped with this. If you are able to play the tape up to the foil splice, do so. Once the track change occurs, pull the cartridge out of your machine. You will then have to take the cartridge apart. Once you have opened the cartridge, you will need to cut the tape at the splice, then pull some tape from the center of the hub (I'd say 6-8 inches), then either tape the two ends back together with scotch tape (applying tape to the back side aka graphite side of the tape). Then start pulling the tape again from the center of the spool which will start winding the tape back onto the hub. If you should have any difficulties with this please let me know and I will gladly post a video of this process.
I found my roll of foil sensing tape on ebay. Here's the link www.ebay.ca/itm/363670148037?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=cZiRlmVGSVe&sssrc=2349624&ssuid=aP_LevwRRbW&var=&widget_ver=artemis&media=COPY
So here's a dumb question from someone who is new to this: When I opened up my broken tape I only found one cut end. Where and how do I find the other end?
It will likely be tucked in at the center of the hub. There are two methods of retrieving this end of the tape. One, using a toothpick at the center of the hub to pull the end of the tape up. Or two, if you have an empty cartridge wind the tape onto the empty reel but make sure you leave some of the tape sticking up as when you transfer the tape back to the original reel you will be feeding the original reel from this area of tape. I will make a video on this process over the weekend
Helpful as heck. I have been brute forcing my way inside. I am yet to fix any of my non working 8 track tapes. This has got to help!!
Thank you. Thank you! THANK YOU! I purchased the same 8 Track cassette twice. First one I opened and tried to rewind I ended up ruining the tape. When I got the same tape the second time my player ate it. Determined not to loose out twice, I found your video and was successful in saving the cassette. 😉
You are most welcome. I am glad that my video helped. Happy tracking
Excellent video.
Enjoy this video...very helpful 👏🏼👏🏼👏🏼👏🏼
Tenian buen sonido por el ancho de la cinta
Okay Mr. Fancy Schmancy "splice block" which side does the splice tape go on? The outside where the tape head can read it or on the inside where you can't see it? I got me a humdinger on Ebay that's repairing everybody's tapes this way and we're running into heaps of trouble here with tracks sounding funny.
The foil splice goes on the side of the tape that contacts the head. Sorry I am just responding now (a month later), I am just now seeing your comment.
Σ΄ΕΥΧΑΡΙΣΤΟΥΜΕ ΦΙΛΕ ΠΑΡΑ ΠΟΛΛΥ ΑΛΛΑ ΜΑΣ ΕΧΕΙΣ ΜΠΕΡΔΕΨΕΙ ΠΑΡΑ ΠΟΛΛΥ ΓΙΑΤΙ Η ΠΡΟΒΟΛΗ ΣΟΥ ΕΙΝΑΙ ΜΕΣΑ ΑΠΟ ΚΑΘΡΕΠΤΙ ΚΑΙ ΤΑ ΕΧΟΥΜΕ ΔΕΙ ΟΛΑ ΑΝΑΠΟΔΑ.
Where did you get that splicing block? That looks SOOO helpful with the coin slots!
I got the splice block from a chap named Troy Ohelo in the Facebook group 8 track fixation
facebook.com/groups/1866892219991935/?ref=share&exp=3bcf
I hope this link helps
@@8trackfm I was just gonna reply with this exact same thing. I got that very same splice block and it works perfectly.
I didn't quite catch what you said about your source for the new pads. Is it a standard 8-track replacement part, or is this something you're getting from Home Depot or a hobby store?
The pads used here are from weather strip. I don't remember where I bought this but as long as the weather strip isn't too stiff, any brand from any hardware store will work. The softer the material is the better. You can also use quarter inch thick sponge cut into quarter inch width. If you are looking for proper pre made pads, you can try 8trackavenue.com
How do you only have twelve subs
Well 13 now
Thank you friend. Your support is greatly appreciated. More videos coming soon
just curious what was the name of the album on the 8 track tape you were repairing?
Sadly I can't remember. I think it might have been a Johnny Horton tape but i am not too sure
The World of Johnny Horton
Hey bro did you know your video is backwards the take upis in the right not left, just saying 😮
Make sure that your screen is facing a mirror, then watch the video again by looking at the mirror. There...fixed it.🤣🤣🤣
Do you use a clothing iron to iron out the creases of the tape?
I am one of the few that doesn't. I tried once and ended up fudging the tape up.
Is there any reason why I have to open the tape to replace the pressure pad? Is it bad to just cut a pad into two pieces and put them in place? That's what I've been doing when the cart is finicky and I can't get it open. Just cut and stick it on.
Sorry for the late reply. I hadn't received any notification of your comment. Anyway, I don't think it's overly necessary to open the cart to change the pressure pads. Your way also works too. I have changed pads with the same process that you have mentioned
If you get a pair of snap ring pliers from the hardware store, they'll open up any cart. I got a pair and it's an absolute life-saver. The carts with the 5-clips were a major pain and the ones that are glued shut were impossible, but after getting that tool, it's now smooth sailing.
@@jasonw6688 Thank you. Any chance you can explain how you use them?
Do you have a video on using the empty cart to re-spool a tape? Haha I dropped a tape while trying to fix it
Not yet. I haven't had to do a respool yet. But I will once the time comes
Do you know why one of my 8track tapes is worbly? It goes in and out of tune and speeds up and slows down. I’ve tested other 8 tracks and they sound fine, so it leads me to think it’s a problem with that specific 8 track tape and not the 8 track player.
Sounds like your tape is wound too tight. This happens often when the fast forward function is used on players equipped with this. If you are able to play the tape up to the foil splice, do so. Once the track change occurs, pull the cartridge out of your machine. You will then have to take the cartridge apart. Once you have opened the cartridge, you will need to cut the tape at the splice, then pull some tape from the center of the hub (I'd say 6-8 inches), then either tape the two ends back together with scotch tape (applying tape to the back side aka graphite side of the tape). Then start pulling the tape again from the center of the spool which will start winding the tape back onto the hub. If you should have any difficulties with this please let me know and I will gladly post a video of this process.
Hi, is there a model for the repair tape (the silver roll)? I'm in a hurry to fix my 8 track cassette
I found my roll of foil sensing tape on ebay. Here's the link www.ebay.ca/itm/363670148037?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=cZiRlmVGSVe&sssrc=2349624&ssuid=aP_LevwRRbW&var=&widget_ver=artemis&media=COPY
You can also find some on Amazon as well JVCC MPF-01 Metalized Polyester Film Tape [Mirror-Like]: 1/4 in. x 72 yds. (Silver) a.co/d/iRsmKhS
1.000.000.000 thanks
You are most welcome. I hope this video was helpful
So here's a dumb question from someone who is new to this: When I opened up my broken tape I only found one cut end. Where and how do I find the other end?
It will likely be tucked in at the center of the hub. There are two methods of retrieving this end of the tape. One, using a toothpick at the center of the hub to pull the end of the tape up. Or two, if you have an empty cartridge wind the tape onto the empty reel but make sure you leave some of the tape sticking up as when you transfer the tape back to the original reel you will be feeding the original reel from this area of tape. I will make a video on this process over the weekend
Thank you!
You must be doing this in a mirror since everything appears to be flipped.
La velocidad era de 3-4
Los cartuchos
Tenian 4 canciones no? Cada cartucho
8 track tapes had up to 90 minutes of play time. The "8 track" refers to 2 stereo channels spread over 4 programs or channels if you will