434Mhz Wireless Transmitter and Receiver
Vložit
- čas přidán 21. 08. 2024
- Hi ,
This video is to show you how to make a simple wireless signal transmitter and receiver using 434Mhz RF module.
◾ Buy 434Mhz RF module - www.amazon.in/...
◾ Buy HT12E and HT12D - amzn.to/37CPZTH
◾ Other suggested videos -
1. Light Dependent LED Flasher -
• Simple Light Dependent...
2. AC power detector -
• Wireless Power Frequen...
3. RGB controller using transistors -
• Simple RGB LED Control...
4. Amazing LED lighting -
• Amazing LED Lighting w...
5. Top 5 LED chaser projects -
• Top 5 Awesome LED Chas...
#RF_Module #Transmitter_And_Receiver
#ESTechKnowledge - Věda a technologie
It's neat and clean, that is why I liked this circuit soo much...❤️
Ok
Broo your teaching idea is very easy.
you are really creative
Please Sir by powering both the transmitter and receiver with 4.2v lithium ion battery, Is the range 100 meters ?
Yes it will work but in the open places
@@estechknowledge hello bhai
Its very clear video and simple circuit.. Keep it up..
Circuit diagram please
Thank you so much 🥰 ........
I am soo confused that how i do this
Also bro can I make this circuits that you used with my self (the transmitter and receiver boards) or I should buy it?
Can you tell me what the current consumption of receiver module when ideal ON but not receiving anything?
Bro can we make sattelite commnunication
very helpful
Can we use this for making rc plane from l293d and with rudder and a corless moter what is range with ant
No
This can be use to control cars.
but it will become very hard to make a rc plane with it.
Bro can we add throttel to it
Boss can u make the 12 channel signal transmitter and receiver please
Very good bro.
Sir, can you please tell the range of this circuit... 🙏🏻🙏🏻🙏🏻
Around 50 meter
@@estechknowledge goodknowledge
@@estechknowledge mool
50 meter😂 Not possible
How to create interference to a hifi (mine obviously....) with a 433 mhz module?
So much of hard work
Yes👍👍👍🎉🎉
Thats awesome. Hope I can make it too.
Very nice 👍, please let me know can we use 36 mili volt supply in place of on off switch
👍👍💪
And in the pins you connect 50-100kQ resistor, if we connect the pins with wire than output voltage will be increase? So can be use motors in place of 4 leds? Please tell
Yes
Bro, i have tried this same but it will work only when we connect the both data pin with wire plz. Tell is the antenna is necessary pls bro iam your big fan
Sir, how can i get tht antenna?
Hi, I tried preparing similar circuit. But I am facing issue.
1. When I connect receiver side(transmitter off), its indicator light turns on and other output LED remains off.
2. When I turn transmitter on, indicator light turns off and all 4 output LED glows.
3. When I press any switch on transmitter, respective Output LED turns off. ( Circuit is performing opposite manner).
Can you please help me to know what is going wrong in my circuit?
You just need to connect the negative side of the LED with the IC and positive side together with VCC/+5V
@@estechknowledge Ok Thank you. I will try and let you know if I face any issue.
Thanks
I love that
Good
If you speak and teach us how to make it that's more understandable.
can any one tell how to drive dc motors in this circuit? 4 channel remote how to solder?
In place of the 4leds which were off unitl he pressed the button,connect the dc motors in place of leds and test
@@shashankg1006 no it will blow the circuit.
kindly use proper transistor of mosfet in series with the motor to operate
Bhai agar Mai same isse tarah se connection kare to work karega
Jab light ki jagah motor laga de
Plz batawo bhai
bro can i use forwars reverse switch
Wireless distance???????????
How much Metre
About 40 Meter
What is the range none line of sight and line of sight
How to drive two DC motors instead of 4 LEDs
Use a motor driver - l293d or l293n ..just checkout datasheet ..connections are very easy for it
Sir mujhy is module ki zrurat ha ya amazone Pr ha Lakin ya Pakistan k address Pr nhi araha ap koi treeka btain
Amigo tem como fazer codificado ou seja com controle único pra cada circuito
Bro what happens if we push two buttons together do both signal goes.or I goes one at a time
Both work together. Even if you press 4 buttons together then 4 LEDs will glow together.
Sir RF modul to esp8266 ka program he aapke pas
Sir, can you tell me the name of all parts
Can i run 5v dc motor on this circuit
Thanks Sir ji. Sir mere se q nhi chal riha.
Can I get the circuit diagram with connections please..
How can increase control range?
Great....
In place of 100-3300 resistor can be use 100k ohm resistor means bulb will not fuse
सर ईस सरकीटसे टोयकार चला सकते हैं या फीर दुसरा सरकीट बनाना पडता है धन्यवाद
Why does it remains on till you put current in the transmitter
I made this circuit on breadboard and it's not working at all :( can anyone please guide where could I be going wrong
What power supply you have used
Right this is not working
I maked this but transmitter and receiver , can't received ,totally I connected perfectly but in reaceiver foure lights are blowned when I connected to transmitter with battery not worked what's the problem
You need resistor whenever you put LED into the circuit. This circuit is 5V.
Did you use 9v battery?
@@jumbo999614 3.7 volts ,both r and t worked but their transmission is not possible no working
@@vadlavenkatachary6473 I use 5v.
1 Mega ohm for Transmitter
33k ohm for Receiver.
Working perfectly.
Also, I soldered antenna to both modules.
If you searched on google with key word "ht12e voltage"
it will return this:
"at 5V VDD and has high immunity against noise".
sir I am inspired and wanna make something that requires 6 buttons and the LED's to say. Can u plz help me to add a few more buttons
I also think that adding a few more buttons could be really helpful for my RC car too . Plz suggest something sir
OK
I will be making 8 channel transmitter and receiver soon.
Might be before 20th september.
@@estechknowledge Thanks a lot man
Sir iske reciever se motor ka connection kaise krengee
Pls help me
Anybody
This will help you to understand - czcams.com/video/hKuLJNzlPpA/video.html
Sir mere circuit ki led continuesli glow kar rahi hei jab tak botton nahi dhabao please help me😔😔😔🙏🙏
@Ashutosh Jha nahi sir mera circuit work nahi kar raha mene
rf module ko alag se test kiya
par buttan press karne pe koi bhi
led par koi action nahi ho raha 😥😥
issme se rc car chala skte hai?
shall we use it for Toy Car / Toy Excavator?. how to connect with motors?
can we use 10 buttons instead of just 4?
Yes
But we have to use 2xArduino
@@estechknowledge why is that? Any workaround for that?
Can I put motor in place of led
Transmitter and receiver check sahi hai ki kharab
Can you make rc car with this circuit please. Left right front back 4 channel.
Can I use this transmitter and receiver in usb device like mouse , keyboard,etc
nice
Sab to thik hai
Par yahi receiver me market me jo remote aata hai usse chala ke dikhaye
Where did you get your modules from and are they any good all the China ones I have purchased are crap, short range
Bhai yah Sara Saman tumne kaha se kharida hai
Mostly online
Can you press two buttons at the same time?
Offcourse
Renge kitni he bhai
can i ask what is called to those conncting wires?
the metal ones
Can we use this circuit to control two motors
Bos puwede po ba ako mag pa assemble ng ganyan. Transmitter at reciver. 12v type
Led ke badle motor use kar ne se hoga kia
how to programe the ic you use
This ic does not require any program
Is the resister is really needed🤔
please share the circuit diagram of this project
its working in underwater ?
Sir me ise wireless charger banane ke liye use kar sakta hu
No
It work for motors?
how long range
i have problem with the reciever circuit idk why all the light turn on even i push any button of the transmitter nothing happened ... do i need more voltage for the transmitter ?
Had the same problem with bad quality breadboard. So I soldered it. Now it's working fine.
Did you find the solution?
@@jumbo999614 yea I found it it's like there is problem in my connection and my 5 volt regulator but it's work fine now
can you show us whats thath programe you wrote
How many distance this remort work.i mean its range.tell me please
About 100 meter
tell me about audio transmitter and receiver 🙏🙏
Bro how to operate motor to using this circuit because i make rc car so how to use this circuit in rc car
Ism motor kh s connect hoga
Ht12e ic price???
Around 50 rupees
What is the range of this circuit ??
About 100 meter
@@estechknowledge esa koy module he jo 500mtr tak work kre without Arduino apne jo circuit bnayi he usi trah sirf module long reng ka milta he to please🙏🙏 btaye
Kiya is per audio Kese chalega ji
Kitna km ka range hai
Hi bro I love your videos ☺️
Anyway I already told you to make a high sound microphone since months
So could you please make it the next video thanks ☺
So sorry I forgot.
Can you please explain what you really need.
Of course bro
I need to make a microphone that is make high sound signal (out put) using amplifier
Do you understand me 😅
Sorry I can't make it now but I will try to make as fast as I can
Thanks bro hope you can make it 😊
The project that you had asked.
I had made the first level of the project.
Watch - czcams.com/video/m_ZcyWTEPmQ/video.html
Hi sir in receiver circuit after connecting of transmitter than also all the five led are glowing why what is the fault in the
Check the LED's positive and negative connections once again.
Wark nahi kar rahi hi
Dose it work for drone ??
12v battery can use it bro
What's the range bro
Sir esma ic sa output kitna volt deta hai
Around 2V
How to connect two motors instead of 4 leds
That's what I want to do too.
Kit delivery now
If we want to expand the signals what should I do
Use stx882 transmiter and reciever module (range uoto 100m)
And the circuit?
Hi could you put the link to buy the board for the transmitter and receiver on amazon please?
And if you can ... could you make a video where instead of the leds ... you can put the relays ... so that when you send the input to the relays it stays on?
OK
@@estechknowledge Grazie mille ;)
what is it range
Stx882tr module wiring