2003 Chevy Blazer Custom ZR2
Vložit
- čas přidán 6. 09. 2024
- 2003 chevy blazer zr2
2" shackle lift
2" torsion keys
Rear air shocks
2" PA body lift
16" fuel boost rims
33" pro comp xtreme all terrain tires (95% tread left)
Spectre cold air intake
Throttle body spacer
New Battery
New windshield wipers
Single in dual out flowmaster super 40 exhaust (no cats, sounds great)
Tinted tail lights
Tinted turn signals
Front and rear fog lights
Front tow shackles
Fresh undercoat on the whole truck
Alpine cde-121 deck
Jbl gto front and rear speakers
All 4 ball joints (lifetime warrenty on all)
Tie rod ends
Both cv axles
Steering stablizer
All control arm bushings
Mass air flow sensor
o2 sensor
Fuel pump
Thermostat
I know this video is 7 years old now Blazers probably long gone sure was hey beautiful ZR2!!
Damn I like it , sounds really good I'm so gonna do this to my 01 blazer 4×4 4.3 .
I like the set up you got going on with the rear fog lights and the dual exhaust pipes.........
Those fog lights come in handy when an idiot is blinding you from the back...
Man that thing sounds good like a V-8 I'm gonna do my jimmy now thanks
Man, wish my mom never sold our blazer.
I have a 02 Zr2 that I plan to do this exact setup to
Привет вам из России! Вы молодцы!!! Хорошая машина!! У самого был такой продал и ищу такой же, пушка гонка!!!
Ver nice Chevy .... 1A
Thanks man, I got the same one and put it on today actually. Really makes it run good combined with the jet performance programmer. My next project for it is a 2.5" suspension lift to go with my 2" PA body lift.
That is some fucking tight rig there buds. I love the model family, they get it done and with a couple parts it does anything a jeep can. I owned a 99 S10 and got 300k+ out of the vortec, now I just bought a Black 4x4 base, de-decalled, with only a high red pinstripe, pretty damn sharp. Snoop's a 5-speed, and I've got a line on a 5.7 down the way in New Glasgow. I've been researching on swapping the front end with the 05 Colorado though, it looks fookin scary man, but from what I've read it's a lot of fab work beyond what I can do.
I have a 2001 ZR2... Pretty much the same setup you have here except different tires and rims and I haven't done the dual exhaust yet. But am doing the classic 40.... Already eliminated the cat.... But I have the finder extensions...
Dang Nice Truck Man looks an sounds good
I got a 95 gmc jimmy they look identical the did orange between the two is the emblem
man, it is gorgeous
wahoouuu !! very beautiful chevy !!, please excuse my very bad english ( i am french !! )
❤️AMO ESTA CAMIONETA ES MI SUEÑO. LLEGAR A MEXICO EN UNA.4X4.
This blazer is a monster truck as well
I see your IC Regulator has broken, so your electricity is overcharge >14Volt. you have to replace it before your battery explode.
Nice man i got sane one but mines a 97 and i got a double din for my radio . Still got abit to do it. But ya good video
greg jr I'd like to get a double DIN in my 2000 GMC Jimmy, but I heard they don't fit correctly so you have to modify the opening to make a double DIN fit.
I have a 2001 blazer looks just like yours, I need to know how you installed those lights on the front and back bumper and where you got your exhausted customed please!!!!
what happened to the fender flares? Looks better with them on.
Okay honestly which C Wilson are you Charlie Wilson or Ms CW aka C Wilson from players club with Mr J Foxx aka Jamie Foxx,Ms L, Bernie Mac and Ice Cube why because I really don't know man.
Where did u get the bracket for the radio I just know plz and thanks
Single in dual out flow master super 40 says in description thanks
where did you find the dual tail pipes been looking for a set for mine cant find them anywhere
@@ryanbranton3169 most likely custom
I'm trying to talk the Mrs into letting me get one of these ZR2's. She says it must be a 4 door. I try to tell her the best thing we could do is get a S10 or Sonoma ZR2/High rider but that would only be 3 doors. Might get stuck with a trail blazer.
Bobg Gallagher..... They didn't make a door ZR2....
David Shannon I'm sure he is referring to the regular 4 dr blazer
Im having a problem with my Chevy blazer zr2 4x4 im looking for the right fuel pump for it my fuel tank is in the back of my truck and my fuel pump went up and im having a hard time getting the right one so if someone knows what fuel pump fits in there let me know u can find me here on CZcams or Facebook
NICE TRUCK I HAVE A 03 S10 ZR2 4X4 TRUCK JUST WONDERING HOW MANY INCHES ARE UR EXHAUST PIPES
Where did you get the exhaust kit, I’ve been lookin for a dual kit for mine and can’t find one
Flowmaster 40 it sounds awesome i have on my zr2 blazer
I'm in the middle of building my own s10 blazer I'm ready to do my lift I got what I need for the front I just need the shackles for the rear were did u get yours and do u know we're I can get them other than with a lift kit?? I need 2" shackles thanks
Hey nice blazer. what size are your wheels and tires? Im looking at a 03 black 2dr its not a Zr2 tho.. Also around how much just it cost to life 2" Thanks for all the help!
I'm in the middle of building my own s10 blazer I'm ready to do my lift I have what I need for the front end I just need the shackles for the rear I need 2" of lift in the rear at the least we're did u happen to get yours?
Nice..
What do you got for exhaust system
Good
Did you have many issues with ball joints when you lifted?
Did you have to lift it so you could get those rims and tires so they didnt rub? Because i want to put new rims on my zr2 and i cant unless i lift it do you know the deal with it?
Zr2 comes lifted already. Rims are stock size by the looks of them. The Fender flares are missing so it makes it look like it has larger tires. Most likely 10.5x31x15 or x16 depending on model year
Hey man I'm working on my blazer as well and I was wondering how much trimming you had to do to fit 33s cause I was gonna do a PA 2" and a rough country 2.5" and 2" spacers and try to fit 33s but it mostly calls for 31s what do you think?
I managed to fit 31s on stock keys just trimmed a bit, if that helps (now i have the after market ones so i trimmed for no reason) haha
where did you get the front tow shackles? they look better than the stock tow hooks
How did you mount the cai with the tbi spacer? Were the studs long enough to go through the spacer and let the cai standoffs thread onto them?
Wheels are tilted in on front man. Turn down the torsion keys/bars, or look into alignment.
The control arms max out when you try an lift these trucks, same problem with my camber
Are those rims 16x8? And what is the backspacing on those rims? Thanks
whered you get the exhaust done i cant find anywhere in alberta to do my exhaust with duals...
Both questions are answered in the description
The piping after the flow master 40 to make dual where did you get those pipes at?
+Natalie Rose custom done at an exhaust shop
so you mean one in and two pipes coming out or are they separate from front, and are they flowmasters
I've been thinking about putting a throttle body spacer on my blazer, how is yours working out? Any noticeable differences in power and mpg?
what kind of tow hooks are those in the front?
noticed the bc tags, you coastal by chance?
What did you do with the oxygen sensor after the cat?
Idles kinda high doesn't it?
What kind of exhaust is that?! I need that in my life! Lol
That's flowmaster 40 the same one i have on my Chevy blazer zr2 and it's really nice i love the sound of it its awesome
@@tinanovotny2774 I’m trying to find flowmaster duals for my blazer, do you have a link for them?!
Can i ask why you used screws on the door weatherstrip?
+Jack Ostrander came like that when i bought it, the previous owner just did it for looks
Gotcha, thanks.
33x12.5
What kind of lift? And what size tires?
What size exhaust pipe?
Where did you move your computer to?
Grand total cost if you don't mind me asking?
Did you cut your cats off?
Is it straight pipes or glass packs?
What kind of exhaust?
hey man what kind of exhaust is that
What wheels are those??
What kind of exhaust do you have?
U know everyone is asking you the same questions but I read all the comments and I didn't see the answer so what kind of Exhaust do you have on your blazer
its int the description
That thing idles high mine idles at 500 rpms
2:35, engines still cold
Whats the exhaust?
where did you get the keys from?
And it doesn't have 175,000 on it.
Is this thing for sale?
Are you selling it?!
Paid $4400 and invested roughly $10000
C Wilson 10000 . I could of did all that my self for 5000
It's not a zr2 but nice blazer
Why would you say that? The only thing I see missing from an '03 zr2 would be the usual auto 4x4
+Flippusmn the fender flares are not zr2 but it's a badass blazer! I got the zr2 pickup and the flares stick out to me on any s10 or blazer.
+jerzeyjo oh most people who have larger tires take them off. They rub because they bend in slightly. I have a zr2 with them on currently.
one fender flare was missing so i removed all of them
If you took the flares off of a real zr2 you would notice that the steel around the fender points straight out, does not go underneath.
Too bad about the 2 stroke lawnmower engine in it though. :(
Birch what do you drive.
The 4.3l V6 is essentially a 350 with two cylinders cut off ...
Dustin Jolley aren’t all v6s a v8 with 2 cylinders cut off lol
NOT a ZR2!
2003 chevy blazer zr2
2" shackle lift
2" torsion keys
Rear air shocks
2" PA body lift
16" fuel boost rims
33" pro comp xtreme all terrain tires (95% tread left)
Spectre cold air intake
Throttle body spacer
New Battery
New windshield wipers
Single in dual out flowmaster super 40 exhaust (no cats, sounds great)
Tinted tail lights
Tinted turn signals
Front and rear fog lights
Front tow shackles
Fresh undercoat on the whole truck
Alpine cde-121 deck
Jbl gto front and rear speakers
All 4 ball joints (lifetime warrenty on all)
Tie rod ends
Both cv axles
Steering stablizer
All control arm bushings
Mass air flow sensor
o2 sensor
Fuel pump
Thermostat
did you have to re-gear the rear end for the 33 s?
What exhaust is that???