when you think about it, bison leather being comfortable makes sense. In my entire life I have never heard a bison complaining about being uncomfortable. This may be because of the leather!
I bought these exact boots (OT BISON Smooth/Roughout) 2 months ago. Zero break in. My most comfortable boots by far. Arch support is reeeediculus. Honey vibram sole is more forgiving as well. Will confirm all that was said. No regrets. Fun to get confirmation! Great job as always.
@@AirborneBuck Yes. I’m a 14EE IN Keen sneakers. Went down to 13 wide. Perfect. Also wear 13F in Nicks, 13E in Grant Stone and 13EE IN Whites. This bison is my fav!
I can say the same for the two Super Duty’s I have. Wow bison and honey Vibram must be even more comfortable. That will be my next purchase. JK is amazing! I still do not understand how such a well made boot like these tanks have no break in?
@@Bearded360 You really need to feel that bison leather -it is so soft. I think the design of the sole also makes it bend from the get go. The uppers are butter. And like all, JK boots, they cradle on your foot almost immediately. Sizing right is key though, like all boots.
Started working in construction in 1973 and broke in many pairs of Red Wings over the years. I just ordered OT BISON Smooth. At 68 this may be my last pair of work boots
So basically they discovered how to cut their cost and still produce a quality boot that costs the same. At least they've kept their quality and standards, and I'd still buy them
Back when I bought my Forefronts the ot and forefronts were slightly less expensive then the super duty. And it’s literally just 4.5 inches less midsole that’s it
You arent really paying for materials. Lets be clear it still takes 40 Odd Man hours to produce a PNW Boot. Ok you can do what Wesco Did and add some automation. But that only takes down maybe 10 hours. At the end of the day for something that is handmade, you are paying for expertise. There is a reason we dont have mass produced boots like these. And would be rather pay Americans or somewhere else? And we are paying a premium to keep boot making in america since it doesnt exist.
Would be really interested in seeing a review of the Drew's logger boots compared with its more expensive competitors, the Nick's and JK boots. They seem to be a great much cheaper alternative.
Ooooo, a PNW boot that I can actually legitimately justify buying! I'm not doing construction anymore, just shop work and miscellaneous stuff, so I don't want to wear big, heavy, stiff boots anymore but I do need some boots. These check all the boxes for a traditional durable work boot, but at a lighter weight with greater flexibility - I'm here for it! Now, if I could just get something like this, but with a thinner outsole(shorter lugs, harder surface biased) with a little less heel rise...
One test to add to your lineup should be a flex point like a ladder rung (say with 250 lbs of pressure) to show how much the boot does or doesn't flex at that point. I'm a 265 lb man who climbs all day and I haven't found leather to give me the confidence I have in carbon or steel yet. But I'm always searching. I wear Salewa and scarpa light mountaineering boots for reference. Super rigid midsole and essentially a full length shank.
For direct lineman work. This is where the Superduty comes in. Along with even adding a podiatrist custom insert to protect you. If any job should have a mandatory foot doctor evaluation each year its linemen...
Damn... I'm glad I got my order in last month. These things are gonna be on backorder for a while after this one. Looks like I made some good choices. Just so everyone knows, there's a 2 month wait at the moment for building. And after going through and having a pair customized and the order expedited (my other boots are falling apart after 1 month on a new job) the final cost was $855 USD. And I'm not sure I even wanted a toe cap. The guy on the phone basically said I want them and added them to the order. That's like a 1 cm thick toe. Not sure I'm gonna like that, but we'll see.
That’s an insane price bro. I’ve tossed out 350 before and that’s pretty much my limit. I hope those things last you several years. Anymore I have been sticking with a pair that Danner makes (goes for something like 240-260) I forget the name. They hold up just as well as the more expensive pairs I’ve bought. I haven’t owned any boots that last more than a year when I’m wearing them to work. The soles are always the first thing to go. I’ve done the resoling deal but something on the upper will blow C out not long after the $150 spent on resoling. Never feels worth the time.
I have extremely flat feet, and I plan on buying a pair of these bison boots because of the arch support that these boots offer. Bison leather looks so good, too, though. Best for most USA made can't beat it.
Just had got to wear my 300s for a week now and I don’t get fatigued anymore from walking in them all day. Still have that new leather smell and broke in very fast
I think a series comparing all the german army trainers (GATs) could be a cool project for you guys. There is a wide range of prices and the OG is decently old for comparing all the models out there.
I love my Forefront boots by JK, and I know these are basically the same construction with a different sole. I ended up ordering a pair of Nicks Overlanders, but was VERY close to ordering the OT boots. We will see, maybe I'll come around to picking up a pair of these to trash around in too.
I was on the fence, now they are on order. I love the 300X I got so why not both! For the record I am indoor office worker who has no "need" for these boots but I really dig them, so why not!
Just got my OTs a week or so ago. Wearing them a couple hours a day, indoors for now. They don't feel like a PNW work boot. I own Nick's Travelers in Bison as a comparison. I've had the Nick's for couple years and they are barely broken in. Standing on a ladder or pipe you can't even feel the rung (good and bad). The OTs feel like what I envision as an Upland Game, 3-season, hunting/field boot. You can definitely feel the ground under your feet. You are way more connected. The OTs are way more flexible in the forefoot. The JKs aren't perfect. JK did send me crap laces and there's a clinch nail I can cut my finger on sticking through the midsole right in front of the lineman's shank. Thankfully I can not feel it on my foot. Also, on all the CZcams reviews they send a bottle of Obenauf's with the boots. None for me... Nick's sock liner came off, but that's actually pretty common. Stuck it back down and continued wearing them. No issues now.
Love my jk forefront. One of these days I'm going to purchase these bison ot. I waiting on a pair of nicks hardwear pro boots now. Jk makes quality boots that just get more comfortable everyday
I have a pair of JK Forefronts which is the exact same boot as the OT but with a wedge sole and I am very happy with them, only nitpick is the sole wears out in 6-8 months
I also have the 8inch forefronts. Best workboot I’ve put my foot in. I work with asphalt and the majority of the guys use a wedge sole due to the fact it leaves less of an imprint in the hot mat.
I’ve got bison superdutys on order, and I currently own Nicks builder Pros and Franks front range boots. I’m excited for the bison leather I just hope they’re as good as my Nicks and Franks, I’ve seen a lot of QC issues going around with this brand and with several of the other PNW makers as well. I think they just have too many orders and in an attempt to keep up with demand they’ve lost some of their attention to detail.
would be rad if you did a collab with JK Boots and used some interesting leather like this Bison leather.... also of all the PNW boots that I've looked at these were the ones that most interested me... so thanks for reviewing them.
I've watched this video a couple of times. I just noticed that the boot on the Left Foot is Full Smooth Bison and the boot on the Right Foot is the Rough Out Combination. Great advertisement! 🙂 Thanks to this video, these were the first quality boots that I ordered. I'm still in the Try-On phase and commend the excellent Customer Service I am receiving from everyone at JK Boots.
@@RogerLoera they run very big. Not sure against the brannock but I'm wearing 7.5 JK and most of my other shoes and boots are 9.5. They're a perfect fit and that was off the size finder on their website
A boot can’t be everything everywhere at once. This is a beefy sneaker build looking like a PNW boot giving some degree of support which is mostly the extreem flexible honey lug sole itself. To put a half lineman piece to get some support leaving the front to be as flexible as possible. Cutting corners while remaining in the PNW zone and saying to people you don’t need that extra support, take less support and have some flexibility, it feels nice, just try it. Your legs can handle the weight of a PNW easy, they don’t get tired of caring that weight around. The stiff sole works as a spring making walking easier. And yes less weight and more flexibility feels nice and probably enough for couple of hours of light work or casual wears. I would consider these as a spring summer boot for city trips you won’t walk all day but the price should be less, $350-$400. We can also agree Weston isn’t a good representation of the kind of people who wear PNW boots. Let’s be honest he says it himself he is in a part of his life he needs these JK OT and not the support of PNW boots. Luckily the heel is supported by a big fat piece of veg tan leather 👏🏼 Lastly I feel Weston finally chooses his best boots and can’t really change his mind again, these are his favorite PNW boots of all time! Which are beefy 8 inch sneakers.
Yeah they’re not as stiff as the real deal work boots - everyone buying them should know that. Tons of people like a boot but just need it on the weekends or just want to wear them every now and then. But yeah they could stand to be in the $500 range and be reasonable
I love my OT's! They are the best boot I have every owned in my life. You know what is my favorite shoe I've ever had? Dansko. How about we cut a pair of those bad boys up eh?
The problem is people like you parroting things you read with no actual experience. You wouldn't recommend them, but yet you've never actually tried them. I see more people saying that 'they've read and heard bad things' than from people that have ACTUALLY had a bad experience themselves. Does shit happen? Of course it does, with every company. But from a lot of what I've seen (and this is just my opinion mind you} the problems end up being more an unreasonable customer refusing to even let the company even try to fix something than a problem with the company or their service. I have received better customer service from JK than from Nick's BY FAR. I'll gladly deal with JK again, but am very hesitant to ever deal with Nick's again.
I'll stick with my Bellview Tanker boots that I've been wearing ever since I can remember. They're comfortable, durable and cost effective for me. Can't see paying all that money and waiting six months to a year for a pair of boots that I don't even know wll fit and will kill my feet for a month or two before they get broken in.
@@JimKiralfy So you're saying Weston has no integrity? Even though he's owned a pair himself (in different leather) for the last year and a half? Cool story.
@@Patryn71 from previous Rose Anvil videos: czcams.com/video/C-gK9Zqu7_M/video.html Weston calls Nick's "the ultimate work boot" in a video sponsored by Nick's, and includes an affiliate link to their web store in the video description. czcams.com/video/xzRjohzblnU/video.html Weston says that it's "hard to dispute [White's are] not the best in the entire United States" in a video sponsored by White's, and includes an affiliate link to their web store in the video description. This week it's JK's turn to be the best boot ever, in a video sponsored by JK, with an affiliate link to their web store in the video description. It's called 'pay to play', and it's how CZcamsrs make money.
A lot of people recommend bison leather. I have long thought of getting the JK ones, but sadly, they don't come with safety toes. Then I found that Nicks released their new bison Builderpro with safety toes. They totally look overkill, and I love them. My Nicks Americana will arrive next month, and it will help me decide which last I'll try for those bison boots.
My favorite boots took an entire year to break in, and that was with being worn nearly daily. I'd rather have that same boot with the additional weight and build. Bison is a great leather, but I want my boots to outlive me.
@@Highland_Paddy This is my biggest issue with these handmade boots, that's a lot of time & money to end up with the wrong size. I just got some Thursdays over the holidays, different business model of course, but the exchange process to get the right size was painless & free. This is a different level of product of course, but, man, to spend so much more money and wait so much time just for the sizing to potentially be a roll of the dice with no easy recourse is such a turn off. I may have to go for it with these JKs though...
@@RyTrapp0 Well, I had issues with Thursday fit and sizing, too, but then I'm only out $200 for the ones that I can't really wear and they were here in three days and I could have returned them immediately, etc. I've been going back and forth over several websites and if you're willing to lose money on return shipping, Frank's has some models in stock that you could at least try on first if you're lucky to try on their size and hope they run similar to JK? They both seem to be my front-runners for any possible future purchase now out of the PNW, but I think JK custom expense is second highest next to White's and then Frank come in third.
@@RyTrapp0 This is where the shoe and clothing industry needs to be changed up. I'm looking at Thursday, Helm, Adelante, Rancourt all because they at least have return/exchange policies. I took a step back and stopped looking because I was getting so frustrated. None of the current tech options that recommend your size work. 3D printing custom lasts based off measurements from the iPhone LiDar scanner will likely be where it goes in the future, hopefully. If you DM Rider Boots with your foot measurements Ron will at least try and help you size and pick a last for his boots based off actual foot measurements. Why no other companies do that is baffling.
Hobby bootmaker here. I also use upper leather as the filler before vegtan midsole. better than eva and cork, but save a couple bucks and less squeaking than veg on veg.
I can see why you like these for going to town. But when I’m on very uneven ground, getting in logs, driving my old tractor, maybe even putting on spurs and climbing a tree, I want the rigidity and the heel and the arch support. I can see why these boots evolved here in the Pacific NorthWET. I don’t mind breaking them in.
Bought a pair of JK's based on your recommendation. This has been the hands down WORST experience I have ever had with any pair of shoes. The quality is terrible. When I called to see why they forgot to fully stitch my boot, Customer Service asked if I would be okay super gluing them back together. Literally out of the box brand new. Instead of sending boot oil they should send crazy glue so their customers can glue back together their "American" made workmanship. After almost 30 days of back and forth trying to get customer service to address the issue I got them to make me a replacement. I got another pair where the grain is defective ON BOTH the left and right boot. I would be EMBARRASED to send any customer what I got, TWICE. This company has zero integrity. It's embarrassing to me to have to admit I paid for such garbage.
I’ve been looking at PNW boots for about 4-5 years now. Always hesitant about buying a pair. Only thing that really worries me is the sizing. Not being able to try on a boot before I purchase just seems crazy to me. The cost of these plus the wait time on having them built. It would be a huge upset if they didn’t fit right and I had to send them back to wait even longer.
I have a new pair of bison boots on the way, and I am really loving the look of the old ot boot. Too bad they're discontinued, otherwise I would scoop up a pair.
Hate to say it my man, but they sponsored the video. That's a problem. You didn't specify if the sponsorship was just providing the boots or if there was a cash payment, but if they paid you (which I assume is the case, otherwise I think you'd have said so), that destroys your credibility as a reviewer. Not just you, but anyone in your position. You're reviewing boots - I can't understand why you would accept sponsorships from boot companies? Why not pursue unrelated sponsorships? There'd plenty of companies that regularly sponsor CZcamsrs. I guess because you want or need the money for the channel more imminently; of course, because, as you pointed out, you've destroyed a lot of money worth of products, but by accepting those sponsorships, you throw your credibility away completely. You acknowledge IN THE VIDEO that people hit up your comment section feeling sus about the sponsorship - I mean, I'm writing you a fresh one right now. I'm that guy today. But then again, you're also the guy who took a payment for a review today, so don't be too quick to roll your eyes when you read comments like mine. I do hope you think a little more carefully about it, and reflect on your credibility in the industries of leathercraft, shoemaking, AND CZcams, and consider whether you're willing to follow best practices for a reviewer (meaning, not accepting payment for a review).
I think I am getting these for all my early/mid season hunting and hiking activities. I live two hours from Spokane so I can even go for a custom fitting 🤤
This boots looks beautiful. If only it had an adamantium toe, carbon laces, 7 layers of leather for the midsole, 4 inch nails at the heel, a full set of speed hooks instead of eyelets, and certification of handmade in the U.S.A. for $250 then id be all over it. Afraid im gonna have to pass.
He's obviously sarcastic, and for a good reason, paying for quality is one thing, but these kind of boots are generally overkill and overbuilt for almost anyone
I know you were joking, but the omission of the speed lacing (and dual zone lacing- where, e.g. the foot may be laced tighter than the calf) is a bit of travesty
@@simongrushka983 certain features have been omitted because it is up to the builder to read my mind or at least take enough feedback to know that a feature such as the one you suggested should be obvious to them.
Get a high quality wallet, belt or MORE in the Rose Anvil shop here - bit.ly/44jXLNu
Thank you Weston!
Designing this boot model was a lot fun, and we’re so glad to see that our customers love it.
Thanks for tuning in guys!
Hey its you!
I have Franks and JK. JK the best hands down. The fit is incredible vs the Franks. Glove fit, perfect.
I'd love to see a shankless, wide toe box zero drop boot with the Pacific northwest durability.
this seems a little scammy... like an undeclared paid promotion.
What's up with the huge void in the heel?
Bison is really one of those forgotten gems in leather. Looks great, wears like iron, breathes extremely well.
when you think about it, bison leather being comfortable makes sense. In my entire life I have never heard a bison complaining about being uncomfortable. This may be because of the leather!
As someone who grew up around cattle - can confirm, they complain non-stop about their skin being too tight and stiff.
I bought these exact boots (OT BISON Smooth/Roughout) 2 months ago. Zero break in. My most comfortable boots by far. Arch support is reeeediculus. Honey vibram sole is more forgiving as well. Will confirm all that was said. No regrets. Fun to get confirmation! Great job as always.
Hey Steve! Was their sizing guide on point for you? Thanks!
@@AirborneBuck Yes. I’m a 14EE IN Keen sneakers. Went down to 13 wide. Perfect. Also wear 13F in Nicks, 13E in Grant Stone and 13EE IN Whites. This bison is my fav!
Yeahm they dont all have a tough break in. but my Whites Smokejumpers (my faves) were rough to break in took 6 months
I can say the same for the two Super Duty’s I have. Wow bison and honey Vibram must be even more comfortable. That will be my next purchase. JK is amazing! I still do not understand how such a well made boot like these tanks have no break in?
@@Bearded360 You really need to feel that bison leather -it is so soft. I think the design of the sole also makes it bend from the get go. The uppers are butter. And like all, JK boots, they cradle on your foot almost immediately. Sizing right is key though, like all boots.
I don't know if they have recognised themselves as a fashion brand, but these boots are very thoroughly built and look beautifully made.
I had a rolling gang box hit me in the heel awhile back…I’m happy to have had that type of “overkill” heel counter.
Started working in construction in 1973 and broke in many pairs of Red Wings over the years. I just ordered OT BISON Smooth. At 68 this may be my last pair of work boots
I can confirm that these in bison are by far the softest, most comfortable boots I have ever own. They are 100% worth it.
Moleskin helps a lot with breaking in boots. I didn't even know it existed until a few months ago. Been a foot saver.
That and KT Tape its what all the professional runners use.
So basically they discovered how to cut their cost and still produce a quality boot that costs the same. At least they've kept their quality and standards, and I'd still buy them
Back when I bought my Forefronts the ot and forefronts were slightly less expensive then the super duty. And it’s literally just 4.5 inches less midsole that’s it
Yeah I'm pretty sure it's a bit cheaper than their standard boot. Still handmade though so it's going to be pricey.
Actually, it's more because only available as custom, etc.
The labor makes up a much bigger chunk of the expense than the material costs do
You arent really paying for materials. Lets be clear it still takes 40 Odd Man hours to produce a PNW Boot. Ok you can do what Wesco Did and add some automation. But that only takes down maybe 10 hours. At the end of the day for something that is handmade, you are paying for expertise. There is a reason we dont have mass produced boots like these.
And would be rather pay Americans or somewhere else? And we are paying a premium to keep boot making in america since it doesnt exist.
Would be really interested in seeing a review of the Drew's logger boots compared with its more expensive competitors, the Nick's and JK boots. They seem to be a great much cheaper alternative.
Bison were always native to the Americas and technically the og leather for here, love that the bison are also making a come back
I wish I would’ve known about these bisons before buying my nicks😢
@Daryl Hill yea I only recently got schooled on bison by the bearded butchers they kinda give a history lesson and teach you how to butcher a bison
Honestly it should be the standard for work boots, in my relatively uninformed opinion :)
Ooooo, a PNW boot that I can actually legitimately justify buying! I'm not doing construction anymore, just shop work and miscellaneous stuff, so I don't want to wear big, heavy, stiff boots anymore but I do need some boots. These check all the boxes for a traditional durable work boot, but at a lighter weight with greater flexibility - I'm here for it!
Now, if I could just get something like this, but with a thinner outsole(shorter lugs, harder surface biased) with a little less heel rise...
My favorite boots are the forefront from jk. The ot is a very close second. Those two pairs of boots are by far the best footwear I’ve ever owned.
One test to add to your lineup should be a flex point like a ladder rung (say with 250 lbs of pressure) to show how much the boot does or doesn't flex at that point. I'm a 265 lb man who climbs all day and I haven't found leather to give me the confidence I have in carbon or steel yet. But I'm always searching. I wear Salewa and scarpa light mountaineering boots for reference. Super rigid midsole and essentially a full length shank.
For direct lineman work. This is where the Superduty comes in. Along with even adding a podiatrist custom insert to protect you. If any job should have a mandatory foot doctor evaluation each year its linemen...
Damn... I'm glad I got my order in last month. These things are gonna be on backorder for a while after this one.
Looks like I made some good choices.
Just so everyone knows, there's a 2 month wait at the moment for building. And after going through and having a pair customized and the order expedited (my other boots are falling apart after 1 month on a new job) the final cost was $855 USD.
And I'm not sure I even wanted a toe cap. The guy on the phone basically said I want them and added them to the order. That's like a 1 cm thick toe.
Not sure I'm gonna like that, but we'll see.
That’s an insane price bro. I’ve tossed out 350 before and that’s pretty much my limit. I hope those things last you several years. Anymore I have been sticking with a pair that Danner makes (goes for something like 240-260) I forget the name. They hold up just as well as the more expensive pairs I’ve bought. I haven’t owned any boots that last more than a year when I’m wearing them to work. The soles are always the first thing to go. I’ve done the resoling deal but something on the upper will blow C out not long after the $150 spent on resoling. Never feels worth the time.
Mine came in today! Absolutely love these boots.
How long did it take for then to be made? I'm currently waiting on mine.
this video convinced me to buy one and he's right, I don't think ill ever go back to normal shoes after these
Every pnw boot ive had havent required any break in. Super comfortable from 1st wear
I just got a pair of JK Superdutys, they are hands down the best!
Got my JKs a couple weeks ago. Looks like q good thing. Month and a half wait for a stock boot.. but unreal comfort and durability.
I have extremely flat feet, and I plan on buying a pair of these bison boots because of the arch support that these boots offer. Bison leather looks so good, too, though. Best for most USA made can't beat it.
Just had got to wear my 300s for a week now and I don’t get fatigued anymore from walking in them all day. Still have that new leather smell and broke in very fast
I think a series comparing all the german army trainers (GATs) could be a cool project for you guys. There is a wide range of prices and the OG is decently old for comparing all the models out there.
BW 2000 basically brought me to the world of boots. Amazing boots and incredible durable
My first boot from PNW group was JK Superduty Bison (thanks to you!)
And my next will be OT 6" Shadow Bison !! Can't wait for them to arrive !!
I love my Forefront boots by JK, and I know these are basically the same construction with a different sole. I ended up ordering a pair of Nicks Overlanders, but was VERY close to ordering the OT boots. We will see, maybe I'll come around to picking up a pair of these to trash around in too.
I was on the fence, now they are on order. I love the 300X I got so why not both!
For the record I am indoor office worker who has no "need" for these boots but I really dig them, so why not!
I just bought the OT as a hunting/wilderness boot for these exact reasons! Can't wait to get them.
I ordered these exact boots 2 weeks ago. Cannot wait to get them!
Me too, only 4 weeks ago.
I'm so stoked. My Danner's only lasted a month on the new job. Hope these fare better.
Love this! I have a few pairs of JKs and haven’t looked back. These are next
No one sources better Bison Leather than JK.
Look around, you will not find any other boot maker with this leather that looks this amazing.
Just got my OTs a week or so ago. Wearing them a couple hours a day, indoors for now.
They don't feel like a PNW work boot. I own Nick's Travelers in Bison as a comparison. I've had the Nick's for couple years and they are barely broken in. Standing on a ladder or pipe you can't even feel the rung (good and bad).
The OTs feel like what I envision as an Upland Game, 3-season, hunting/field boot. You can definitely feel the ground under your feet. You are way more connected.
The OTs are way more flexible in the forefoot.
The JKs aren't perfect. JK did send me crap laces and there's a clinch nail I can cut my finger on sticking through the midsole right in front of the lineman's shank. Thankfully I can not feel it on my foot.
Also, on all the CZcams reviews they send a bottle of Obenauf's with the boots. None for me...
Nick's sock liner came off, but that's actually pretty common. Stuck it back down and continued wearing them. No issues now.
Love my jk forefront. One of these days I'm going to purchase these bison ot. I waiting on a pair of nicks hardwear pro boots now. Jk makes quality boots that just get more comfortable everyday
I have a pair of JK Forefronts which is the exact same boot as the OT but with a wedge sole and I am very happy with them, only nitpick is the sole wears out in 6-8 months
Ouch
I also have the 8inch forefronts. Best workboot I’ve put my foot in. I work with asphalt and the majority of the guys use a wedge sole due to the fact it leaves less of an imprint in the hot mat.
I feel the same way about my redwings, no leather midsole makes them very flexible compare to my Nicks.
LOVE my JK honey bison Superduty boots. Great boots and a fantastic looking leather that's so unusual.
I’ve got bison superdutys on order, and I currently own Nicks builder Pros and Franks front range boots. I’m excited for the bison leather I just hope they’re as good as my Nicks and Franks, I’ve seen a lot of QC issues going around with this brand and with several of the other PNW makers as well. I think they just have too many orders and in an attempt to keep up with demand they’ve lost some of their attention to detail.
would be rad if you did a collab with JK Boots and used some interesting leather like this Bison leather.... also of all the PNW boots that I've looked at these were the ones that most interested me... so thanks for reviewing them.
Great vid, Jk will definitely be my first PNW Boot brand
Just got mine and I can tell they're the best work boots I've ever tried on! I'll retire before they do!
I've watched this video a couple of times. I just noticed that the boot on the Left Foot is Full Smooth Bison and the boot on the Right Foot is the Rough Out Combination. Great advertisement! 🙂 Thanks to this video, these were the first quality boots that I ordered. I'm still in the Try-On phase and commend the excellent Customer Service I am receiving from everyone at JK Boots.
Recently picked up their Forefront boot for work and love it. Really considering the OT as a camping/outdoor use boot.
I ordered a pair of Forefronts a couple weeks ago for work. I CANNOT wait to get them, they are out of stock so I will have to have some patience.
Just got my redwood O.Ts a month ago and I love them. Uppers are kinda gnarly to break in to be honest but it'll be well worth it
How's the sizing compared to others? Especially of your brannock size.
@@RogerLoera they run very big. Not sure against the brannock but I'm wearing 7.5 JK and most of my other shoes and boots are 9.5. They're a perfect fit and that was off the size finder on their website
@@alex_ottomano gotcha, thanks man.
A boot can’t be everything everywhere at once. This is a beefy sneaker build looking like a PNW boot giving some degree of support which is mostly the extreem flexible honey lug sole itself. To put a half lineman piece to get some support leaving the front to be as flexible as possible. Cutting corners while remaining in the PNW zone and saying to people you don’t need that extra support, take less support and have some flexibility, it feels nice, just try it. Your legs can handle the weight of a PNW easy, they don’t get tired of caring that weight around. The stiff sole works as a spring making walking easier. And yes less weight and more flexibility feels nice and probably enough for couple of hours of light work or casual wears. I would consider these as a spring summer boot for city trips you won’t walk all day but the price should be less, $350-$400. We can also agree Weston isn’t a good representation of the kind of people who wear PNW boots. Let’s be honest he says it himself he is in a part of his life he needs these JK OT and not the support of PNW boots. Luckily the heel is supported by a big fat piece of veg tan leather 👏🏼 Lastly I feel Weston finally chooses his best boots and can’t really change his mind again, these are his favorite PNW boots of all time! Which are beefy 8 inch sneakers.
Yeah they’re not as stiff as the real deal work boots - everyone buying them should know that. Tons of people like a boot but just need it on the weekends or just want to wear them every now and then. But yeah they could stand to be in the $500 range and be reasonable
I love my OT's! They are the best boot I have every owned in my life. You know what is my favorite shoe I've ever had? Dansko. How about we cut a pair of those bad boys up eh?
Love my JK’s
Difficult to watch you cut these in half. I just ordered a pair and waiting patiently. Bison Smooth out OT
Great choice. Personally, I don't much care for the stitchdown construction, but even so, really well made.
Fantastic! That is exactly what we needed to know.
I’ve heard a lot of quality assurance and customer service complaints about this company. Because of that, I probably wouldn't recommend JK boots.
The problem is people like you parroting things you read with no actual experience. You wouldn't recommend them, but yet you've never actually tried them. I see more people saying that 'they've read and heard bad things' than from people that have ACTUALLY had a bad experience themselves. Does shit happen? Of course it does, with every company. But from a lot of what I've seen (and this is just my opinion mind you} the problems end up being more an unreasonable customer refusing to even let the company even try to fix something than a problem with the company or their service.
I have received better customer service from JK than from Nick's BY FAR. I'll gladly deal with JK again, but am very hesitant to ever deal with Nick's again.
I'll stick with my Bellview Tanker boots that I've been wearing ever since I can remember. They're comfortable, durable and cost effective for me. Can't see paying all that money and waiting six months to a year for a pair of boots that I don't even know wll fit and will kill my feet for a month or two before they get broken in.
This looks like a commercial for that brand
It is.
I'm sure you said that about the Nick's sponsored videos, too, right?
@@Patryn71 that's the point. The 'best' boot is always the one from the company paying for it that week.
@@JimKiralfy So you're saying Weston has no integrity? Even though he's owned a pair himself (in different leather) for the last year and a half? Cool story.
@@Patryn71 from previous Rose Anvil videos:
czcams.com/video/C-gK9Zqu7_M/video.html
Weston calls Nick's "the ultimate work boot" in a video sponsored by Nick's, and includes an affiliate link to their web store in the video description.
czcams.com/video/xzRjohzblnU/video.html
Weston says that it's "hard to dispute [White's are] not the best in the entire United States" in a video sponsored by White's, and includes an affiliate link to their web store in the video description.
This week it's JK's turn to be the best boot ever, in a video sponsored by JK, with an affiliate link to their web store in the video description.
It's called 'pay to play', and it's how CZcamsrs make money.
My jk boots needed almost no brake in time, by far the best boot I've ever owned!
I like my Thorogoods.
Owned thorogoods. Not even close. JK is it.
Not even close to whites perry
So do I. But the PNW boots are tougher and more durable. If I was a logger or construction guy ….
Thorogood doesn't last more than 8 months
A lot of people recommend bison leather. I have long thought of getting the JK ones, but sadly, they don't come with safety toes. Then I found that Nicks released their new bison Builderpro with safety toes. They totally look overkill, and I love them. My Nicks Americana will arrive next month, and it will help me decide which last I'll try for those bison boots.
My favorite boots took an entire year to break in, and that was with being worn nearly daily.
I'd rather have that same boot with the additional weight and build. Bison is a great leather, but I want my boots to outlive me.
@RoseAnvil please do a durability video on Bison Vs Cowhide . Someone needs to test the actual durability and see what this stuff can handle....
With FLAT WIDE FEET not all of us can have high arch Boots. Causes more problems than good tbh. Love the look of those JKs
Indeed! Makes my feet hurt just looking at them. Like balancing on a couple of baseballs all day 😖
@@powers1776reset Great analogy 😆
@@powers1776reset Negative homegirl. They don’t hurt flat feet. Suck it up.
Weston: “What do I love about Jk? They pay me money”.
Drew's new Logger boot is comfortable right out of the box. That pre formed foot bed is genius.
I found their sizing way off and had to spend forty bucks to return.
@@Highland_Paddy This is my biggest issue with these handmade boots, that's a lot of time & money to end up with the wrong size. I just got some Thursdays over the holidays, different business model of course, but the exchange process to get the right size was painless & free. This is a different level of product of course, but, man, to spend so much more money and wait so much time just for the sizing to potentially be a roll of the dice with no easy recourse is such a turn off.
I may have to go for it with these JKs though...
@@RyTrapp0 Well, I had issues with Thursday fit and sizing, too, but then I'm only out $200 for the ones that I can't really wear and they were here in three days and I could have returned them immediately, etc. I've been going back and forth over several websites and if you're willing to lose money on return shipping, Frank's has some models in stock that you could at least try on first if you're lucky to try on their size and hope they run similar to JK? They both seem to be my front-runners for any possible future purchase now out of the PNW, but I think JK custom expense is second highest next to White's and then Frank come in third.
@@RyTrapp0 This is where the shoe and clothing industry needs to be changed up. I'm looking at Thursday, Helm, Adelante, Rancourt all because they at least have return/exchange policies. I took a step back and stopped looking because I was getting so frustrated. None of the current tech options that recommend your size work. 3D printing custom lasts based off measurements from the iPhone LiDar scanner will likely be where it goes in the future, hopefully. If you DM Rider Boots with your foot measurements Ron will at least try and help you size and pick a last for his boots based off actual foot measurements. Why no other companies do that is baffling.
Hobby bootmaker here. I also use upper leather as the filler before vegtan midsole. better than eva and cork, but save a couple bucks and less squeaking than veg on veg.
Love JK Forefronts too!
I can see why you like these for going to town. But when I’m on very uneven ground, getting in logs, driving my old tractor, maybe even putting on spurs and climbing a tree, I want the rigidity and the heel and the arch support. I can see why these boots evolved here in the Pacific NorthWET. I don’t mind breaking them in.
Bought a pair of JK's based on your recommendation. This has been the hands down WORST experience I have ever had with any pair of shoes. The quality is terrible. When I called to see why they forgot to fully stitch my boot, Customer Service asked if I would be okay super gluing them back together. Literally out of the box brand new. Instead of sending boot oil they should send crazy glue so their customers can glue back together their "American" made workmanship. After almost 30 days of back and forth trying to get customer service to address the issue I got them to make me a replacement. I got another pair where the grain is defective ON BOTH the left and right boot. I would be EMBARRASED to send any customer what I got, TWICE. This company has zero integrity. It's embarrassing to me to have to admit I paid for such garbage.
Love the OT series, my next order! With the build quality might be my last I need to make!
Ok Sir. For the Super Bowl of boots. Those boots vs Nick's books. Side by side comparison. I'd get out the popcorn for that one
I'm sold - These are my next boots!
Whites semidress in dress brown with single midsole and 269 sole is most flexible "serious" boots which i owned.
Just ordered the super duties- redwood. Do a lot work in Oregon forests. Can’t wait!
I'm digging that shot around 9:25 of the boots paired with the Carhartt pants. They look great together.
Do you know what model these are?
Nice boots! Light, comfortable, and tough. What's not to like? Thanks for the video.
Jk boots are so great . I have the forefront and they are awesome!!!
I’ve been looking at PNW boots for about 4-5 years now. Always hesitant about buying a pair. Only thing that really worries me is the sizing. Not being able to try on a boot before I purchase just seems crazy to me. The cost of these plus the wait time on having them built. It would be a huge upset if they didn’t fit right and I had to send them back to wait even longer.
Looks a lot like my french army 1952 mod.61 combat boot (La Ranger)
my favorite pair of boots are my nicks bison boot, honey vibram sole, 55 last with the shorter heel high. love it
I have a new pair of bison boots on the way, and I am really loving the look of the old ot boot. Too bad they're discontinued, otherwise I would scoop up a pair.
After seeing this it makes me feel even better that i decided to go with JK over the other PNW boot companies.
These days you need water proof, insulated, safety toe, etc versions and therefore this boot can never be the only boot in a collection
JK makes custom boots.
@@taoliu3949 nothing waterproof which is crazy for PNW
@@wecx2375 It's leather...... no leather is 100% waterproof.
Hate to say it my man, but they sponsored the video. That's a problem. You didn't specify if the sponsorship was just providing the boots or if there was a cash payment, but if they paid you (which I assume is the case, otherwise I think you'd have said so), that destroys your credibility as a reviewer. Not just you, but anyone in your position.
You're reviewing boots - I can't understand why you would accept sponsorships from boot companies? Why not pursue unrelated sponsorships? There'd plenty of companies that regularly sponsor CZcamsrs. I guess because you want or need the money for the channel more imminently; of course, because, as you pointed out, you've destroyed a lot of money worth of products, but by accepting those sponsorships, you throw your credibility away completely.
You acknowledge IN THE VIDEO that people hit up your comment section feeling sus about the sponsorship - I mean, I'm writing you a fresh one right now. I'm that guy today. But then again, you're also the guy who took a payment for a review today, so don't be too quick to roll your eyes when you read comments like mine. I do hope you think a little more carefully about it, and reflect on your credibility in the industries of leathercraft, shoemaking, AND CZcams, and consider whether you're willing to follow best practices for a reviewer (meaning, not accepting payment for a review).
I have no need for boots like this at all. I wear boots maybe twice a year but wow these seem incredible.
My favorite boot...sponsored by the boot maker. Okay 👌
Exactly.
Bison leather is always a win in my book
How do you not mention the huge voids in the heel?
No way for that money…might as well be Sketchers with that heel.
Yeah, that's what I saw. ??? and then Desmond Choo comments about the resole issues as well.
Love this. I just decided to go with JK for the boots I wear on the job site.
I think I am getting these for all my early/mid season hunting and hiking activities. I live two hours from Spokane so I can even go for a custom fitting 🤤
Wow, might order these boots. Thanks for the video! Question; What jeans are you wearing at 9:27?
I'm really digging these in the smooth toe
Big thanks
So it's basically Iron Ranger with different leather 😂
4:55 lost it 😂
I just hope JK will do an engineer in that buffalo hide. Automatic buy for me
Amazing, thank you
I've have no problem breaking them in at all. Maybe because I've been wearing PNW boots for so long. Whites,Nicks and now JK'S.
Funny.... I didn't mention needing new boots out loud, and yet...
Seriously though, this video found me at a good time, been looking for boots.
yo don't forget that honey outsole. It's way more flexible from the original black vibram.
Loved the video❤
That bison leather looks like walrus leather, but much softer.
Wish a company would build a barefoot boot that had even half that quality.
This boots looks beautiful. If only it had an adamantium toe, carbon laces, 7 layers of leather for the midsole, 4 inch nails at the heel, a full set of speed hooks instead of eyelets, and certification of handmade in the U.S.A. for $250 then id be all over it. Afraid im gonna have to pass.
Would be an insult to pay those fine gentleman 250
There is no boot out there like that for 250
He's obviously sarcastic, and for a good reason, paying for quality is one thing, but these kind of boots are generally overkill and overbuilt for almost anyone
I know you were joking, but the omission of the speed lacing (and dual zone lacing- where, e.g. the foot may be laced tighter than the calf) is a bit of travesty
@@simongrushka983 certain features have been omitted because it is up to the builder to read my mind or at least take enough feedback to know that a feature such as the one you suggested should be obvious to them.