Kastking Sharky III 3000 Reel / Overall Reel Maintenance

Kastking Sharky III 3000 Reel
Overall Reel Maintenance
Rusted Bearings / Rusted Pinion Drive
Spool Bearing - 7x11x3
Main Bearing - 8x12x3.5
Right Side Bearing - 7x11x3
Left Side Bearing - 7x13x3
Oscillating Gear Bearing - 7x11x2.5
#Kastking
#SharkyIII
#3000
#spinning
#maintenance
#repair
#abudhabi
#official

[@fishingisreeltv3337]

Niceeeeee!!! Good to go.. Thank you for sharing.. Amazing Talent *REEL DOCTOR* 👍👍👍🎣🎣🎣🐟🐟🐟

[@art_fishing_tv]

Salamat master 🫡🫡🫡

[@rushdrift]

After cleaning I would spray the whole thing in silicone grease then let it dry before putting grease on the metal parts this way you have double security the silicone grease makes water impossible to penetrate and makes plastic part last longer

[@RicardoAbcoonFerreira]

Great video, I bought this size 3000 reel and noticed that the line does not sit uniformly on the spool, there is less line on the upper edge of the spool, I used 0.23 multifilament line. Is the same thing happening on your equipment?

[@jamesbowie8874]

Great video. Did you need to replace any of the bearings or were you able to clean them up?

[@art_fishing_tv]

I was able to clean and regrease it coz it's not busted..tried to minimize the cost of the client..

[@BusuAnglerMahakam]

👍

[@pescabikeaventuras]

hello friend, hard work, what feedback do you give the reel? do you think it's good? how many bearings does it have exactly, it's a very used part in Brazil...great video hug

[@art_fishing_tv]

Hey bro. Personal opinion i will rate it 4/10
Bad Part :
Bearings using low quality
Drive gear and oscillating guide poor quality
Anti Reverse
Good Part :
Hard body
Solid Shaft
Spool
Using Carbon Drag and with bearings
Advice :
Need to check time to time

[@thealexworld6127]

Здравствуйте.Катушка новая или уже ловили рыбу?

[@art_fishing_tv]

Spool Bearing - 7x13x3
Main Bearing - 8x12x3.5
Right Side Bearing - 7x11x3
Left Side Bearing - 7x13x3
Oscillating Gear Bearing - 7x11x2.5

[@gary9726]

Hi my sharky gold iii 4500 has a retrieve problem it's nice and smooth then grinds and becomes hard to turn the handle any idea what causing this

[@art_fishing_tv]

3 cause
1 - shaft either bend
2 - gear issue side plate
3 - oscillating gear or pin

[@gary9726]

Time for a new reel as I live in UK no stockists for parts here

[@art_fishing_tv]

That one of reasons that im not recommended kastking because of parts. Unless you have deep pocket to buy same specs of reel and use old one as spare for the parts you need in future.. Try shimano or daiwa parts are accessible.

[@gary9726]

Yes diawa bg will be the replacement 👍

[@vitorgarcia9687]

Bom dia quando for fazer um vídeo por favor não faz o o vídeo acelerado fica ruim para aprender.muito grato

[@Danielmrcs]

Você pode baixar o vídeo e assistir lento como quiser em um player de sua preferência!

[@YORZTV]

Tamsak!

[@art_fishing_tv]

Thanks for support master

[@jeffersonbautista7970]

Sana po zinozoom in niyo, hindi naman nakikita maayos pagkaka-disassemble at pag-assemble.

[@XOreelworks]

Why didn't you show how to uninstall the other bearing on the right side of its main body that inserted into drive gear ? Is it locked ? And can not be disassembled ?

[@art_fishing_tv]

No cannot be disassemble thats why there's no video in the right side

[@art_fishing_tv]

I didn't take a risk due to parts that limited only..

[@XOreelworks]

Thank you so much for replying. Appreciate that action and i do agree with you. Break a leg, art fishing 👍👍

[@alfonsogarzon7291]

What's the size of the bushing/ballbearing of the pickup lineroller? Please, someone thell me, i need to replace it :(

[@Gary-jb6xn]

I just measured it 4x7x2.5 The newer reels use a bushing which can be ordered from Kastking

[@lurehunter6595]

I have lost tiny spring that holds break, can you tell me where could I order it?

[@art_fishing_tv]

Try to customize or try to check any similar size reel that damage maybe they have same length of it..

[@larryreadout4275]

Very impressive work but I would have just spent $50 on a new reel.

[@KFFishing]

Itu line rollernya bisa di upgrade bearing gak

[@saidamraoui4943]

How it's the size of the bearing of the pik up ? Thx

[@art_fishing_tv]

Spool Bearing - 7x13x3
Main Bearing - 8x12x3.5
Right Side Bearing - 7x11x3
Left Side Bearing - 7x13x3
Oscillating Gear Bearing - 7x11x2.5

[@8120ike]

Do you know what size the line roller bearing is?

[@art_fishing_tv]

I think its 4x7x2.5 but not really sure coz they're using bushing and i didn't do caliper for it

[@alfonsogarzon7291]

What's the size of the bushing/ballbearing of the pickup lineroller? Please, can you measure it?

[@francescociviletti4268]

what do you use to grease the reel??

[@art_fishing_tv]

Customized grease.. We made our own grease.. 100% Synthetic Grease

[@nardoworxtv7187]

Sir what is the size of the bearing inside

[@art_fishing_tv]

Spool Bearing - 7x13x3
Main Bearing - 8x12x3.5
Right Side Bearing - 7x11x3
Left Side Bearing - 7x13x3
Oscillating Gear Bearing - 7x11x2.5