Led hood light installation on 2023 Hyundai Tucson | Plug and Play | Tucson Stories
Vložit
- čas přidán 28. 02. 2024
- Plug and Play installation of Led hood light with turn signals on 2023 Hyundai Tucson without splicing or cutting wires.
Products used:
Hood light: a.aliexpress.com/_m0oZqpk (1.8m)
Plug extenders: a.aliexpress.com/_mMrhpE2 (2pcs male female)
Circuit tester probe: a.aliexpress.com/_mMrhpE2
Crimper/Stripper Tool: hftools.com/app63307
Posi-Taps: www.ebay.com/itm/235003282712...
Note: I'm not affiliated with any of the above products or the sellers. Please feel free to shop around for better deals. - Auta a dopravní prostředky
Probably the clearest tutorial for these LED lights on youtube!
Thank you!
Clearest? I can barely understand him.
Awesome will do it for.mine too
I’m gonna try this
Awesome. To which connector pin is the red wire attached? I have installed it in my car, but it is not always on.
I also faced it. And I changed the red wire connection to fuse tap. Connected to 20amp fuse in engine fusebox. Going to post a video of that soon.
@@TucsonStories thank you
Do you get these extenders for headlights as well ??
I don’t know what kind of plugs are used for headlights but I’m sure we should be able to find extenders if you have a photo of the plug.
Where did you ground the cable?
At 12:35 you can see ground connection. I attached a ring connector to ground wire and used a screw to connect it to car frame.
What size Gauge did you use for wire tapping?
I left the link to post-tap in description. It is around 18 awg, a right fit for the extenders I used. But, original wires are much thinner. If you want to tap into original wires you need smaller taps
Plz give me Flipkart link
@@murtaza4214 Sorry, I don’t know if they are available on Flipkart
Share link online please
All links are in description of the video