How To Build A Wood Slat Wall (Step-By-Step)
Vložit
- čas přidán 27. 08. 2024
- Looking for a creative and affordable way to add some personality to your home? Check out this easy tutorial on how to build a wood slat wall!
👉 Full Supply List - housetohomediy...
Desk accessories
👉 Standing Desk amzn.to/3v3sVZ3
👉Lamp amzn.to/3HKu3rU
👉Desk WhiteBoard amzn.to/3ji5okc
My Tools
*Brad Nailer amzn.to/2FVwqKH
*Miter Saw amzn.to/32PH12S
* Sander amzn.to/3civ3C5
* Circular Saw amzn.to/3mNboOb
*Jigsaw amzn.to/3mNJC46
Follow Me On Social
TikTok www.tiktok.com...
Pinterest: / _created
Instagram: / buildwithcorbin
Affiliate disclosure: As an Amazon Associate, we may earn commissions from qualifying purchases from Amazon.com.
Pretty cool finished product. For folks who have never done this kind of thing before, you probably should explain that there could be electrical wires in the walls, so using shorter nails is a good idea. Wood is 3/4" and drywall is likely 5/8" so using 1.5" brad nails for any slats that don't fall on studs is probably best... that way you don't poke the romex. Great Zoom background wall.
Thank you for this comment, I'm getting ready to do my own wall and was concerned about missing the studs!
can I just double tape it to the wall? I really don't like poking holes in my walls
Thank you! I was so inspired I decided to go to my local Lowes and grab materials and get going! Needless to say I am 3/4 done with this project and it's looking very nice! Glad I came across your video.
Thanks for including the mistakes on here, it makes me much more confident that I can also do this cause I'm planning to do this soon but on a smaller scale. Looks really nice.
Very nice! Gives a more cohesive look than the first wall. And all and all looks fairly easy to do.
I would suggest using a whole long spacer.
Should have used a matte of flat sheen on the black
Love it! Have seen it on another channel too, but not the whole wall. Only behind the bed and behind the wall. The rest was black. Very nice. For a teenager's bedroom.
You could have easier sliced off the side of that outlet cover instead of cutting into the wood. But hey good job! It’s easy for me to offer solutions when I haven’t done it myself.
Also if you didn’t want to sand the nail holes you could apply painters tape to each board, nail through the tape. Then putty over the tape, stain over that and then peel the tape off. Cost a little more but it’s easier to apply and remove tape than it is to sand and clean up! Hope this helps
Holy. That turned out good
This turned out awesome! This will be an upcoming project in my house thanks for the video walk thru
Try using an angled cutting brush for wall corners for a clean edge without taping.
Very beautiful pair very nicely with the accessories.
I think you could have trimmed the outlet cover down by 1/4 and left the slat in tact to avoid notching the wood. Looks good!
Yes. And you can paint the outlet to wall color so it doesn't stand out at all. If you shudder at that idea, just buy an outlet and cover that match as close as you can find to the wall color.
Or adjusted the surrounding slats to accommodate the outlet.
How much did you spend on materials?
Pretty awesome
If i can't paint my wall ( I rent) what do you recommend to put on the wall for a black background?
Nace tutorial ♥️🥰
Thanks!
Very nice 👌
Question. I actually love look of this plus installing the fireplace setup over it. Would this be possible?
What length should the nails be in comparison to the depth of the wood?
How has it changed how the room sounds?
Do you glue to attach or screws?
subsribed
how'd you do this on a concrete wall?
Thank you for that. Can i use the nailer to concrete or i need a different tool
No, in your case it would be best to use MDF board and cover the entire concrete wall with that. Paint the MDF Black then nail the wood slats to the MDF. In order to attach the MDF to the concrete, you will need Tapcons or some other type of concrete anchor. You can easily do this with a drill that has a hammer function.
Love this! Great job. Did you nail into studs or drywall?
What is the original wall? Drywall? Plaster? Wood?
Hello ❤️🙏
It would have been awesome to know what size of wood you chose, that was so fast I can’t even freeze the frame to screen catch it. 😢
If you click on the Full Supply List in the description it says that he used 1"x 2" slats.
what wood do you use?
I have seen videos where they use MDF wood, if painting. Popular is inexpensive
Bitte nicht an einer Außenwand es sei denn die Wohnung ist gedämmt sonst kann es auch Schimmeln dahinter
First
Hi, would you like to collab?
WHY DID YOU NOT JUST CUT THE OUTLET COVER
WHY DID YOU JUST NOT BUY A SMALLER OUTLET COVER
WHY DID YOU NOT GET AN EXTRUDED OUTLET BOX
you had many options yet you selected violence
hi friend, can you make shopper video?
please check your inbox, thanks
size of wood?