8 Cool 3D Printed Models You Can Try This Week
Vložit
- čas přidán 30. 03. 2023
- Here are 8 Cool models you can 3d print this week. As always thanks for watching and happy 3D printing! Big Thanks to today's video sponsor ELEGOO. Check this 3D Printer out here - bit.ly/3oKdmpq (affiliate link)
Models:
TableTop Phone portal - www.thingiverse.com/thing:588...
Designed by BSGMiniatures
Incense holder - www.thingiverse.com/thing:589...
Designed by Tripletaker
Joke 3D Printing mug - www.thingiverse.com/thing:562...
Designed by DaveMakesStuff
Chubby T-Rex pen cup - cults3d.com/en/3d-model/home/...
Designed by IK3D
Cable organizer - www.printables.com/model/289859
Designed by DFV Tech
Desk organizing Cube - cults3d.com/en/3d-model/home/...
Designed by Monkey3D
Phone Holder - cults3d.com/en/3d-model/gadge...
Designed by MATHIEU_BZH
Ikea Pegboard cup - www.printables.com/model/8697
Designed by MoshiBin
#3dprinted #3dprinting #3dprinter - Zábava
2:30 the irony of the double layer shift on an i love printing mug... priceless.
Double bruh moment
I would also intentionally stop the print at like %90 completion to make it look like the nozzle clogged XD.
I like the clock in the background - adds a bit of reality to the process.
The portal would be amazing tweaked to be a charging stand (just drop in, no need to fiddle with wire) and phone configured to automatically show portal animation while charging).
Yeah that would be an easy tweak! Great idea!
Thats a nice idea!
I totally want to print one now and not just for my miniature photography! 😻
I smell a remix.
One of the worst ways to kill your battery is charging while the display is on.
I'm thinking the phone portal would be a great idea for people who do 3d printed table top RPG terrain. Like, how many ways could you add in a phone to your D&D campaign and have it add to the experience?
this is awasome
cool👍🏻👍🏻
Just always so relaxing to see those beautifully lit builds grow smoothly to a chill tune! You keep on making these, ya hear me? 🤗
Haha Thank you for watching. These are just as relaxing to make 👏🏻
1:24 is great but please be careful. I use those "special" incense in the past and the coal can burn through to the holder. Most of them self-extinguish out but I have had a few burn down through the wooden holder I had. Perfect use of that washer.
Do they smell as bad as everyone says it does?
@@frostxr The backflow incense? Depends on the type and who you get it from. There are many good scents that I use on a ceramic version. Sandlewood, dragonsblood, matcha.
love the cup..
I am going to print 100 of those now
PSA:
Even normal PLA is mildly abrasive and brass contains LEAD.
NOTHING printed from brass is EVER "food-safe".
Your print quality and video production is phenomenal!
What filament did you use for the portal? It looks fantastic!
Best channel for 3D printing ideas. ❤️
🥰
And i rlly want a2D printer like ur man this is the best man
salut , quel filament vous utilisez pour vos objets ?
vous ne mettez jamais de supports ?
Good work bro !
Thanks 🔥
Love it, liked and subbed :)
What filament did you use for the IKEA cup and incense holder?
Some cool builds!
What filament was the phone portal print and the incense holder? (Also can you do a cura settings tutorial pls)
Great video! Thank you.
Can you be so kind to explain how to sync shooting with certain plate and extruder position? Thanks in advance.
The first one look awsome
Yeah that’s a cool model!
Very cool I love ur vids
Maybe it's can added arduino, lcd, etc
Night lamp haha
great timelapse!! can you make a tutorial video about your timelapse setup?
What are you burning on the cicular item?
You could make the tray modular , so you remake the burning parts
我想看2:10燃燒完後 金屬片確實把PLA融化了的畫面 你怎麼能沒拍到呢 :))
What filament did you use on the phone holder? Looks insane
I have just started getting into 3d printing and have been looking at different channels and have found a few interesting ones.
One of my favorite channels and one i recommend to anyone getting into time lapses is a small channel called "Black cat 3d" they are a very new channel and have just started making time lapses of all the different things they make. The channel is super nice when responding to commens and i feel they should have more subscribers and support.
Love this❤ sir, what camera u using?
What printbed are you using?
I also made an incense holder and put that iron ring on it but it burned my piece, any recommendations to prevent it from happening???
What is the filament u used in the first print
Cool
The phone holder has a hole in the back specifically so you can route the cable out of the way! A little surprised that didn't make it into the video, your attention to detail otherwise is stunningly high as always
Also this is the first video where more than one thing is actually relevant enough for me to save the video for later, this is rather exciting for me! I will be attempting to make four of the things from this, at least, perhaps even more depending on how many people like them as gifts haha👍
(incense burner for my roomie who's always going through incense cones; USB/SD desk organizer for me; yawning dino for an artist friend who loves dinos; and gonna try and do the phone holder but bigger so it can be a tablet stand)
Awesome glad you got some inspiration! For the charging cord hole I opted not to use it as it makes picking up your phone pretty cumbersome. Thanks for watching!!
😀 the cup of coffee is good
The joke muggle got me laughing a little too much...
ahh the portal would be so awesome if there was an app to flick it to roll dice or something hehe
Nice 3d prints. What kind of filament do you use for the phone portal.
3d jake sparkle grey eco pla, they’re my go to for fancy filaments
@@WildRoseBuilds very cool, thanks for the info. Incidentally, great time-lapses :-)
where to find the portal animation app?
Noice!
Thanks for watching!
What incense holder? I'd love one
The portal, print it larger and put a 7 inch tablet in orso ;)
Can you add a link for the incense holder
That clean overhangs on the cup! thats amazing! i struggle with curling edges from overhangs with my MK3S+
Have you tried a temp tower? I actually needed to raise print temps with a pla+ to stop curling on overhangs which seems counter intuitive. Thanks for watching!
@@WildRoseBuilds after reading that curling results from poor cooling, I tried to lower the print speed für the wall shells, and set the fans to 100%. A print that was knocked off by the nuzzled cause of the overhangs printed fine with this settings, but still, the overhangs look messy..
amazing
Thanks
How do you set up your Timelapse so the camera slowly rotates? (1:21)
An extremely finicky camera slider 🥲
@@WildRoseBuilds Haha sounds good, I am thinking of setting one up on mine but have to design it first. Your videos are awesome btw!
You should consider giving away your finihsed builds to a local tabletop game shop so they can use it in their props. So as to not go to waste
Just got my ender 3 s1 plus. Havent put it together yet. Trying to figure out what is the smallest table size I can get away with to keep it some what in the corner and not put it in danger lol any Idea what that would be?
People swear by the ikea lack tables, they’re a little low to the ground but you can buy a few and make an enclosure. If it’s a top mounted spool you’re probably good with any table bigger than 2x2 feet!
@@WildRoseBuilds thank you
You seem to have little to no stringing. Are you always using fresh filament or de-humidified beforehand? No retraction changes? Or is it the low speed/lower layer height (I'm assuming .1? Or is that actually .2)
i love that phone portal. a must get.
What kind of filament is that? I love the way it glitters!
Why no answer? I like it too / want buy it :) thank you
Oh sorry - answer was: „3d jake sparkle grey eco pla, they're my go to for fancy filaments“ from WildRoseBuilds
What did you light on top of the 'fountain' (second video) to create this fog?
I really like this fog 'fountain' :)
Thats a backflow incense cone
Thank you :)@@Zaque-TV
Love your videos, I have an Elegoo Neptune 3 Pro myself, I just can't get my prints to consistently stick to the bed. I have tried many things, and I have noticed that you have changed from the stock Elegoo PEI bed to some other one. I would really appreciate it if you could name the brand of the PEI bed you use. Your prints always seem to stick well which is a dream for me!
The stock bed is actually just as good! I unfortunately fused some petg to mine and marked it up quite bad. Give it a really good scrub with hot water and a sponge then a wipe with isopropyl. The one I switched to is an ultistik brand one
@@WildRoseBuilds Interesting! Maybe the one i got is defective? Or maybe my filament? Appreciate the feedback, again, love your videos.
Set the first layer height lower, and wash the PEI with soap and water. Isopropyl just dries oils back down to the surface. But for prints with a smaller contact area, a thin layer of glue stick solves a lot of problems. Also, you can increase bed temp to 65C for PLA and 75C for PETG.
@@truantray Wow! Thank you! I will definitely use this. It has been very long since I have used my printer lol, I have simply been too busy since it's troubles have been to burdening.
can you tell me where to get the portal screen savers if that is what they are please.?
They’re just movie files that you can loop and scroll through. I’m sure someone has an app for that tho. Thanks for watching as always!
@@WildRoseBuilds just want one of the ones you used, i have no clue what i'm doing cell phone wise. thanks.
@@carbide1968 they’re linked on the thingiverse page for the model in the description
@@WildRoseBuilds got it and tyvm.
Love the video as always 🍻
Are you slightly moving the camera after a few layers to make that rotating affect?
What camera and editing software do you use?
I’m using the worlds worst camera slider! I edit in premiere and I use a gh4
realy cool what camera do you use?
Thanks! LUMIX gh5 😉
@@WildRoseBuilds thank you I will look to yours that for my timelapse😁
:O What slicer do you use?
Prusa 2.6 😉
When I saw the mug printing, I thought that's some serious layer shift. I guess the joke is on me!
The last one I'm wondering how did you print without support ?
There was a slight fail where the charging cable slots in which I missed when slicing but the rest was support free!
@@WildRoseBuilds looks neat
Its sunday when im watching this...
What software is used for the video to take out the print head? Very cool affect1
id like to know this as well.
my first thought was, something green was placed on front side of print head, any editing software can then just remove the print head altogether...hmm idk
i just searched for how-to info. there's lots of vids to guide you.
though, it seems some gear will have to be purchased. raspberry/octo pi and logitech cam.
czcams.com/video/2C8EEhkwADM/video.htmlsi=lzcLt7V4rjyevEqf
🤩
layer shifting examples xD
wait, the mug was layer shifted by design?
Yep! It’s supposed to emulate the frustrations of 3D printing. Pretty clever design!
My only question is, how do you shoot this type of time lapse?
Octoprint is a platform that allows you to connect to your printer via a raspberry pi. There are many advantages to this including adding a Raspberry Pi camera where you can watch and control your prints remotely through Octopod. You can schedule photos by time or layer change, and even have the print head move out of the image for each photo. You can also add AI to watch your prints and stop them in case of stringing, thermal runaways, and fails. Can be a bit daunting for beginner level, but lots of helpful content out there to push you along your path to remote access and time lapse vids. Aloha.
@michaelhobbs4764 Some Klipper based printers do have that feature included - and of course, vendors offer overpriced webcams as accessory, if you want to unlock it.
💕👍
CAN YOU POST A TUTORIAL FOR THE TIME LAPSE (sorrry for caps)
Забавно что подставка под телефон именно эта у меня стоит сейчас на столе. Причем напечатана была лет 7 назад
2:42 à 2:50 KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK!!!!!!!!!
I tried the mug and print failed. It ended up like a normal mug. Ffs
soo much layer shift
That joke 3D Printing mug is so perfect. I love it.
Only 3D print hobbyists would get the joke.
Yeah I was surprised that it printed so well. Emulating a fail like that is harder than you’d think. That’s one of my favorite designers at the moment. Thanks for watching!
@@WildRoseBuildsmy printer had a layer shift on the exact layers so now the mug looks perfect!!
Check your belts...
fantastic, more plastic in the world, that will end up on a landfill as soon as you move your house and start realizing you dont want to keep all garbage around
Hi
Hi
add print time pls
新片上映！
02:43是故意的吧🤣🤣🤣🤣
Yes!!
If only money wasn't so hard to come by bills yo.....anyone got a spare 3d printer😢
Pls
It´s in the video description.
Innovative tech used to make mundane things... The portal was cool, the rest, not so much.
Be careful, you can ONLY print these on the Neptune 3 Pro, do not try with any other printer. Ever! 🤡
Lol neptune 3 pro is the goat
Would be nice if someone actually spoke in the videos.
the half finished coffee mug was funny
whats up with all the savage layer shifts?? yikes!
That's the joke! It's a joke mug :)
@@StormBurnX errrr, bs, i see it in several prints, lazybones