Multi Color 3D Printing (With Single Extruder Printer)

Learn how to make multi-color 3D prints using a single extruder 3D printer in this video.
Shop 3D printers, scanners, spare parts and filament including the filament used in this video at www.jaycar.com.au/3d-printing
Learn more about the filaments:
www.jaycar.com.au/filament-vs...
www.jaycar.co.nz/filament-vs-...
For more in-depth science, building and coding on this subject, visit www.creatoracademy.com.au

[@SteveH-TN]

Thanks for sharing your thoughts and experiences

[@hanktankstudios2551]

This video is great! ive been looking for an easier way to print multicolor

[@hillelarieli990]

Hi I love you're videos

[@CreatorAcademyAustralia]

Thanks! Glad you enjoyed it 😁

[@coreyburke5381]

I'm new to 3d printing and glad I found this channel it's helping me learn alot, so thank you! Can I ask what is the name of the printer being used to create the castle in 5:01 ?

[@CreatorAcademyAustralia]

Hi! It is an Ender 3 V 2

[@haferbrei_]

What is the link for the gengar figure?

[@randystuartjr.4217]

Would this work with the Elegoo Mars 3? It says it's an "FDM printer with a Single." I'm very new to 3d scanning and printing so I wanted to verify.

[@CreatorAcademyAustralia]

Hi! Yes these tips will work with all FDM printers. Have fun! Garry

[@robvanderkruys3140]

I have to learn how to print. I cannot figure out how to print anything detailed like your rainbow castle model. It would turn into a messy glob!

[@CreatorAcademyAustralia]

Make sure you level the bed and get that first layer down perfectly. You can also try adding some glue-stick to the surface to make it stick better. Good luck! Garry

[@OnePieceCollector]

Nice to know 🍩

[@kyramoelcha7523]

but how to know to time it right to swap the filament?

[@CreatorAcademyAustralia]

Hi! Keep an eye on the print, then when you decide that the next layer should switch colours, pause the print and swap out the filament. Garry

[@zedcoremaster]

Yh just keep an eye on a 5 hour print easy

[@snoopppdoggg7109]

When I 3d print. If I pause the print and put a new color in it doesn't print where it left off from and goes ahead of where it should. Any suggestions on what I could be doing wrong

[@CreatorAcademyAustralia]

Which printer are you using? Some printers may not have the feature.

[@redhoticecube]

Do you know a slicer software that can make the 3d printer use different colors?

[@SpinnDaBlock63rdK]

Bozo 😂

[@elliottdavidson4722]

add kirby file in decription link!

[@entropy616]

the off sync is so distracting lmao

[@elliottdavidson4722]

but kinda useless

[@smilloww2095]

What do you mean

[@JHARPPP]

@@smilloww2095he doesn’t know what he means

[@TheLonewolf53]

Sorry not American made not worth it

[@spacepanda7096]

what?

[@TheLonewolf53]

Sorry not American made not worth it.