Microshift shifter cover replacement on road bike. How to replace brake lever covers.

Hi there! Dear cyclists! In this video tutorial, we'll take a look at
How to replace the brake lever covers.
Remove the winding from the handlebar. First of all, you need to unwind the handlebar cable very carefully so as not to damage it. You may want to reinstall it, but of course it is better to install a new winding. It will be more pleasant to the touch and generally better. Remove the shifter from the bottom of the road bike. Usually the outer casing is torn as a result of a bike fall. I wish it could be replaced quickly and easily, but unfortunately it will take some hard work to make it all work.
Absolutely everything has to be removed, disconnected and then reconfigured. Remove the hood from the street shifter. Difficult, but possible.
Sometimes it is recommended to warm up the rubber with a hair dryer or hot water, but there is a chance of damaging the shifter itself.
We will not do this, but we will try to take off and put on, as usual way, without the use of elevated temperature. Before replacing the shifter, you need to make sure that the outer shell is the same.
Put on a new cover for the shifting wheel. It is better to remove the clamping ring beforehand, it will interfere with the installation of a new shell on the microshifter. Sometimes it seems impossible, but if you try a little, it will work! A little bit, a millimeter by millimeter we get to finish.
Looks like it's done! Subscribe to the channel, put likes. And we continue to put a cover on the shifter of our gravel bike.
The hardest one is behind. Now we need to prepare the fixing clamp and put the shifter on the bike ram (road bike handlebar). Positioning on the drop bars. Brake lever mounting and positioning on the handlebars.
When the Revoshifters are lined up opposite each other, you can go to the next step, which is to wind the winding on the handlebars of a bicycle. So we replaced the outer skin on a road bike revoshifter.
Ask your questions in the comments and like!
Cycling enthusiasts will be captivated by this video.
Verbal-free video showcasing mechanical sounds. Understandable across languages; an international DIY video.
#microshift #roadbike #cycle
00:00 How to replace brake lever covers.
00:20 Remove the winding from the handlebars.
00:59 How to remove the shifter from a road bike.
02:10 Removing the shifter cover from a road bike.
03:16 Putting a new shifter cover on a road bike.
06:18 Positioning on the drop bars.
06:58 Brake lever mounting and positioning on drop bars.
🆗🎥🚲
Write in the comments, what you would like me to do in the new video.
❓❔❓
Ask your questions in the comments
👇👇👇

[@NiceBikeService]

❤ If you liked this video,
🙏 share this video with your friends
📈 it will help the development of the channel!
❓ ask your questions

[@user-db4ei9or7j]

Useful video. As I suspected after watching this, you can replace the hood covers without taking off the grip tape. Just undo the screw holding the hood to the bar, cut off the brake cables, new hood covers on, new brake cables in, screw back on.

[@user-jz4yp6dw6k]

Nice to know that this master from wonerful country. I Catch a couple words like "ОПА" or "Так" from another video. I know where he from and smiling.

[@foras00]

I wonder if microshift hoods would fit on an old shimano sora ST 3500. I couldn't find any replacements online in my country

[@ericjohnson8571]

How do you identify what model shifter you actually have. I have purchased 2 sets. Both are wrong

[@ZORO69308]

Where can I buy

[@Gabbro.88]

Grande 👏

[@rafoleon2645]

Hi where can I buy those hoods?

[@NiceBikeService]

Look for them in online stores and Chinese marketplaces. I could find these hoods only in China with delivery

[@christianadrian8903]

Donde lo compraste ?

[@NiceBikeService]

Sólo los encontré en un conocido mercado chino cuyo nombre empieza por "ali"😺

[@NiceBikeService]

⚠ ❓ ⚠
*ASK YOUR QUESTIONS*
👇👇👇