Kyosho Inferno Neo 3.0 Nitro Buggy | Out of Box & FIRST START!
Vložit
- čas přidán 24. 08. 2024
- This is the Kyosho Inferno Neo 3.0. In this video we get the car out of the box and start it up for the very first time! My initial impressions of the buggy are very positive, I love the look of the body shell and being a typical Kyosho appears to be very good quality. This will be put to the true test when I take it to my favourite bashing area soon. Stay tuned in for that video!
Watch the Breaking in Video here: • Breaking in your KYOSH...
You can buy this car here: www.modelsport...
Thanks for Watching, please like my Facebook Page.
thercbiker
If you would like to support the channel, I have added small things to an Amazon wish list that would help with my ability to continue to produce RC and Bike related content! Click Here tinyurl.com/ya...
My Bike/s: Kawasaki Z1000SX
*Apologies in advance for any sections of this video where you struggle to hear me due to wind noise*
This buggy is quite possibly one of the best looking RC's I've ever owned! Check out this Out of Box & First Start Video, with the full break in video to follow tomorrow morning @ 7:30 (UK).
Amazon Wish List ----> tinyurl.com/yahlhys2
Facebook -----> facebook.com/thercbiker
Your videos and content is great. I havent been active in RC Nitros for over 13 years. Thanks to you i am back into the hobby.
Welcome back!
hey bro!!!!! Me again. I had a look at the slipper clutch just now. First I looked at the whole clutch and the exploded view diagram in the manual. My first fault was the slipper spring bracket was in the wrong way 😂🤦♀️🤦♀️
Then I tightened the slipper nut/bolt all the way in and un-did it between 2 to 2 and a half turns.
I then ran the car and it was perfect. I noticed that there was soo much power going into the back wheels compared to normal. I then ran the car on wet, long grass (with my tyres that have no grip at all left on them) and nothing came undone at all. I know for a fact that normally the 4WD system would have come undone about 3 times during that short run. It’s given me the thrill of wanting to drive my car again after a year of frustration.
Thank you so much for your advice!!! Really helped and wish the best for your channel 👍👍👍
Awesome! Have fun : )
Great to see regular content and your enthusiasm again ..great work buddy 😉
Thanks Mario!
That's a very nice looking buggy
Thanks! : )
Was looking at this one. Hmm. Nice!!! Interested to see how parts support is going forward. Of course that might be different in your neck of the woods vs. the states. Congratulations on the new buggy!
Fingers crossed parts stay in strong supply! Good parts supply at the moment :)
I was feeling for content thanks
Thanks for tuning in!
Love you're videos😀
Thanks for watching!
I just purchased this buggy last week, my first RC car in 30 years. No matter what I do the engine runs too rich and stalls on throttle. Help please! Thanks!
Look at the LSN maybe
I do like the older style body that it comes with. Never been a fan of the current cab forward style bodies.
Me neither ! :)
im curious, what do u do as a proper work job?
I had a problem with the throttle screw comking loose on me with a brand new rtr, I recommend some blue locktite on the important parts.
Yes it's a good idea to use some threadlock
Very nice buggy !!
Thanks, taking it out bashing today to see how it performs!
Well i had much fighting to get this running... Idk but it didint want to start and i needed leave the plug on it at it would haved stayed on
What's the top speed? And should I get this or a nitro rustler
Aaaaand another one. :D But what exactly makes this one so nice for you?
It's just something about it... I love the body shell!
Kyosho inferno vs HPI trophy ? Thanks in advance.
Inferno, stronger and better
Nice video as usual. Thanks! I noticed the glow igniter setup you have. It looks like one I would like to use instead of the small, rechargeable/battery type I have. Can you share the links for the igniter, battery and any connectors I would have to solder on?
Hi Nick, it's a prolux easy glow igniter wheelspinmodels.co.uk/i/104834/
You can use any type of battery, something like this would work fine: wheelspinmodels.co.uk/i/110893/
But you can get a much bigger battery if you like.
You can then solder on a deans connector: wheelspinmodels.co.uk/i/70688/
Just got one recently and love it. Bought a 6v hump pack but it's way too big and can't fit. Can you please help me which one you have in the Inferno? Thanks
Nice buggy mate 👌
Thanks 👍
I love Hobao's but I have a Kyosho Neo 2.0 with the KE21 engine and I must say they are a Dream engine, so easy to tune and run(even with months of neglect), but I still love the Hyper engines, for their trouble shooting 😉 I had the 2 servo's fail pretty quickly in my Neo too unfortunately
Hi mate, got the same buggy and engine as you.
Interested to know what plug and fuel you are using?
Nice! :) good to hear
@@phoenixdean If you're asking me.... 25% Race Experience Fuel with Cold plug
@@TheRCBiker thanks for the reply, I was wondering about the ke21 engine. I put that engine in after the gx21 blew up.
After the kyosho g-plug went I started using os8 it works well it just seems the os8 doesn't give it as much power as the g-plug.
Like to cu get a Losi 8ight rtr buggy. Im about to break the engine in in a few hours. First 1/8 scale nitro buggy ever owned. Nice addition to my hpi savage x4.6. Thinking of getting the fly sky 3 channel radio and receivers so I can fine tune end points. When breaking hard radio tray flexes like crazy over working the servo and to just have a decent radio.
Have fun! :)
Nice vid but would be nice to see them driving though👍
The bashing video is on my channel
czcams.com/video/WIxyS1LYrUo/video.html
Hey TheRCBiker can you make a video about how to clean a fuel tank please☺
Remove it, empty it. Fill with soapy water, give it a shake. Rinse it out,allow to dry! Done :)
LOOKING FOR NEW ONES MADE MY OUT OFF BIKE TYRES AND CUT THEM WITH GLUE AND WORKING
Good to hear!
@@TheRCBiker PUT ON FRONT
Hello there, very nice videos you create, I learn a lot from you and I thank you, this is a very nice looking buggy, please let us know how it performs and if you prefer this one over the Hpi trophy 3.5 ? Also what do you say about parts availability between these two buggies? Thank you
Hi there! Good questions! Ask me again on the bashing video and I'll be able to give you a better opinion ;)
Would the neo 3.0 body cover fit on the neo 2.0 doesn't look much different
I'm not sure, haven't tried it
I have a Kyosho inferno 7.5 and I swapped in a Dynamite .28 engine. And I was wondering if it’s okay if the bottom of the engine is rubbing on the chassis? Or is the engine supposed to be a few millimeters above the chassis?
which part is touching the chassis?
Invest in a starter box....it’s much easier....use a 4s lipo, loads of power....👍
Thanks... But I don't find pull starts particularity difficult ;)
Hello sir, nice video
I had stripped a gear out on my older Kyosho inferno mp5 because of incorrect gear mesh, does your car come with a plastic or metal gear? And how do the plastic ones hold up?
Thanks
Hi there
This one comes with a plastic spur gear, which I managed to strip today! There is a metal upgrade available. I do think that for a £300 buggy it should come with metal spur gear as standard, interesting move by Kyosho to stick a plastic one in
I love my one did you use the break in plug for the airflow??
No... I don't think I got given one ?
I've considered getting this one, be good seeing what you think of it.
Taking it out bashing today :)
@@TheRCBiker You should be sponsored by a fuel company with the amount you must go through 😄
@@andRAWR88 I wish! Yeah, I got through 5 litres last week!
@@TheRCBikerThat's breaking in for you. At least optifuel is decent value for money.
@@andRAWR88 It is, but I stopped using optifuel , I've been using a race blend fuel. Will probably return to optifuel because it's available everywhere!
I have a hpi exhaust pipe which splits and inside is a removable cone, its like your car there . What's its purpose.
It doesn't make a massive amount of difference but its purpose is to make it a bit quieter !
What is a fabric tune for nitro motor kyosho ke21r? Thanks
what do you mean fabric tune?
Gas power all day man nitro to twitchie
Hmmmm Not so sure ;) I love both!
A question i have which is better to biy Kyoshu Inferno 3.0 or the Hyboa Hyper nitro? Appreciate your opinion.
Hobao :)
@@TheRCBiker why is that dude? Why hobao??
What’s the better brand Kyosho or Traxxas ?
Kyosho
I've never been a massive fan of Traxxas
It's called Trax-sux for a reason. 😁
What’s the heater you are using?
Just a cheapo one from Amazon :)
@@TheRCBiker I thought it was battery powered but now 8nsee the cord. I heard of people putting them on car floor and using exhaust of their car to warm them up
I got the neo 2.0 brand new
Awesome! Have fun! :)
Not to expensive for a really good looking buggy.
Thanks Chris
LIKE TYRES
CAN HAVE THEM LIKE IT
They look nice! :)
nitro forever
Agreed :D
Nooo should of got the truggy or the mp9 tki4
More cars coming don't worry ;) The MP9 is a bit too nice for bashing in my opinion. This one is better suited for playing about with!
I have a hobao hyper ss buggy
Awesome, nice car!
@@TheRCBiker you are the best you tuber ever because you all ways respond to me and to other people and you make the best rc videos😀😁
Didn't hear a thing.
next time bigger cher for more performance
I have wanting a Nitro RC car for five years but l can’t afford it
Get saving! :)
By the way, CZcams is telling me you're not subscribed! Please subscribe, it helps the channel out ;)
TheRCBiker I did
First again
Thanks for tuning in !
The fuck was that you didn't drive it cmon mate that's not on
Did you not read the title of the video?