Ham Radio Antenna Install - GoPro Action On Tower!
Vložit
- čas přidán 27. 05. 2024
- Here is action from a GoPro. How to install BIG HF ANTENNA using the tram-line method to top of Tower to 80'. Must see how its done.
#hamradio #dxing #communication #construction #dangerous #towerconstruction #gopro
Holy moly! Excellent work 👏
The wind definitely adds to the sketch factor!
Fun stuff!
Ham Radio Productions, Subscribed because your videos always make me smile!
Thank you!
Tnx for the footage Ray. I’ll stay tuned and watch how you pin the rotors someday. That tram line looks complicated
More videos coming!
I find it quite interesting how much one can learn by simply watching, then ask questions. Tower work may be fun, but it ain't easy. 73,
Thanks for watching!
Great work, but I think I will stick with tilt over towers thx :)
FB! Thanks!
I'm curious how the synthetic guy lines hold up to the weather. also curious about the side loads on the tower from pulling the antenna up at an angle. I assume you have to clear the tower on the way up with the antenna and thats the reason for the side pull?
The rope is from europe called Mastrant. We pull to clear guy wires!
it sure does amaze me that will all the money worth of radio gear in this video, that a simple handheld radio was not utilized so that you wouldn't have to yell across the property at each other. working smarter not harder.....
WE can easily hear each other! Not an issue. Radio is not going to help the situation.
You need a couple of small ht's to save the shouting, be a lot safer as well
No HT's. Yelling gets attention and HT requires taking hands off rope
SMALL compared to a MOSLEY PRO-96S which is the KING of HF Yagi antennas.
Old school antennas. Mosley was a thing in 1970’s and 80’s but nothing like the stuff you can buy today!
@@Ray-W2RE The Mosley is built so well that they are still going Strong today. They are built with Quality materials that survive some of toughest conditions. Most all of my friends own and use them because they are dependable and they don’t use Fake made up numbers for their specs like so many companies do.Why would we remove them for another brand when what we have works and they perform amazingly? I run 1200 Watts through my TA-53M and I Rarely ever wait in any pileup for very long.I believe that the Quality of the materials used in their products is why they have been Successful for so many years and they are still going Strong now in 2024. As for me and my friends we are Very Pleased with their products and the price of their products.We know that they will outlast each of us and we will not be making repairs to our antennas and that’s a Big Plus.I’ll put them against any brand and best of all no tuner required and Zero moving parts.You could not Give me another brand to replace my Mosley. 🎙 W4KVW 🎙
I'll show this to my wife. She hates dipoles. I'll let her know that I'm going to take them down and spend at least a $100k on this kind of setup. I'll be doing it for her. Right?
Well $30K is about right for this but $100K wil get you two 100' towers! :)
So you spend thousands on the antenna and mast etc but use cheap RG-213 coax. Why not use Messi & Paoloni or some other decent coax.
RG213U for coax loop, we ran LMR600 from switch to shack!
All this effort and risk just to get on the radio and share your call signs with old men 😮
Making those dream stations happen! Ray de G0VLF
Yes we are! :)
Fabulous video thanks de G0SGO
Thanks!