Very helpful to know the characteristics of these. There are some things that the specs page won't tell you. As for the phrase, I think you were looking for "Rock my world."
Hi Pawel, did you have time to do some more testing? I tested some DAL7056 vs hqprop 7x4.5 and have to say that the hqprops are garbage. They have so much jello compared to the dal and also missing some thrust. The dal props work even great on 3s and I can even do some light freestyle/acro while the hqprops seem to overrev and my voltage drops so low that thrust is missing. I fly the tyro129 with stock 2507 1800kv motors. I also dont see any increased flight time with the 2 blade hqprop.
If Dalprops made it more like the shape of the T-motors 5" props and at a lower pitch around 46-49, I think they would make a real winner at the 1700-1900kv range. The only thing the the 7056 miss, is to be nice to the battery, and a prop like that would most likely do something about that without sacrificing to much handling.
I’m still not sure what props to run for best results on my 7 rig. Motors are 2806 1300kv on 6s. Just got a big ass battery to try too. The V1S 3.5 are pretty much my main since I built it as a cruiser. However I have taken it on a harder Acro flight. It was a bit windy and I got some flutters. Defiantly going to give the 7056C a go for that maybe?
2207 and 2306 are 5 inch quad motors. Of course they're gonna struggle with a 7 inch prop - even when you do have a lighter one you may still have poorer performance. That's why you've gotta get something like a 2508 size motor.
I am running into the same problem. Limited prop choices for my 7" TBS Source One - BH Avenger V2 2507 1850kv 4-6S running 5S going mid/long range. Have you tried running 6 inch props? Tried all of these props you list also except Gemfan. Cyclone is my favorite so far for power, smoothness and thrust but its a power hog. HQ green doesn't bother me and I like those for flight time (10+ min) but makes my quad wobble like you mentioned. Good video, thanks for posting this, it will help others. Just think if you reviewed all the 5 inch props available how long that would take!!! ;)
Hoping I can get a response, how do you feel about the old school 2212 motors? I've got a set i got for a build (in 2015 LOL) and now getting back into it. I feel like they should do great on a 4-6s 7 inch build. (1250k sunnysky 2212, 3-4s rating be dammed LOL)
Hi i have a genuine question for flight time on a 4s 7 inch what motor soze should i use. Im looking at the emax eco2 2807. Is that good for flight time range
I havnt flown in a long time but I use 2508 1450kv motors on 5s works well with the t7056c changing frame at the moment but what do you know / think of the gemfan flash 7040x3 ? thanks
Do you have any suggestions for an 8" version of the DAL Cyclone T7056C for freestyle use? To be used with iFlight XING 2806.5 1300kV motors on 6S. Thanks! I got the iFlight XL8 over the XL7 due to the thicker arms, but I'm struggling to find decent 8" tri-blade propellers.
Best propellers is tarot 7045. But very fragile. Every fly ended by crack in the air. Anyway, i have with it longest flytime, fastest top speed and no vibration
Zastanawiam się nad ramą 7" Myślałem nad XL7 V3, Skystars G730L i Martian IV 7Inch Która z nich będzie najlepsza do long range ? A może jest jakaś lepsza ? Chce żeby po zamocowaniu gopro session nie było widać śmigieł w kadrze.
I have tried all of these propellers(apart from green hq biblade) on my 7 inch build using 2514 motors, and I found the hqprop v1s 7×3.5×3 to give the smoothest video. With the others I get a bit of jello. Next I want to try Gemfan 7040 flash triblades. Have you used them, and what was your experience?
@@rolliseventeen exactly I currently use a F40Pro III 1600kv for 6s 6" and 4-6s 7" flying and it works perfectly fine. It's a very light quad tho. If I fly a heavier loadout (Like a 300g camera with 400g of batteries) then you can feel it not have enough response for proper stabilisation tho.
I only use the HQ Slow Flyer 7x4 ... on TBS Endurance motors and a weight of nearly 1kg with the 360 cam ... or on 2207 BrotherHobby 1600kv ... biggest problem is that with any other prop I have to balance them
Definitely a lack of 7 inch prop options plus 4 inch ones for smaller long range quads. Wouldn't mind your opinions on this frame .. which I have to build up.. had to use Shapeways to print the longer top print which is not supplied but files are available due to the extra complexity of printing it. mokaframe.com/moka-gravity/ Takes up to 7 inch props and is foldable. Incredibly robust. Will fit a full stack on it's edge including a runcam split or like wise. The centre of Gravity is very central with a look similar to a Mavic Pro Clean air for the rear props.. I just flew the 3-4 inch version and you noticed the difference straight away.. Simple to set up Diversity Rx as well as space for GPS.
Very helpful to know the characteristics of these. There are some things that the specs page won't tell you.
As for the phrase, I think you were looking for "Rock my world."
Great videos. Easy to understand and remember information:) 👍
i use those 7042, nice info about d gain
Hi Pawel, did you have time to do some more testing? I tested some DAL7056 vs hqprop 7x4.5 and have to say that the hqprops are garbage. They have so much jello compared to the dal and also missing some thrust. The dal props work even great on 3s and I can even do some light freestyle/acro while the hqprops seem to overrev and my voltage drops so low that thrust is missing.
I fly the tyro129 with stock 2507 1800kv motors. I also dont see any increased flight time with the 2 blade hqprop.
It would be nice to know on which configuration are these consideration made. Motor size, KV, 4s/6s etc.
Gemfan FLASH 70*40*3 ☝👍👍
If Dalprops made it more like the shape of the T-motors 5" props and at a lower pitch around 46-49, I think they would make a real winner at the 1700-1900kv range. The only thing the the 7056 miss, is to be nice to the battery, and a prop like that would most likely do something about that without sacrificing to much handling.
I’m still not sure what props to run for best results on my 7 rig. Motors are 2806 1300kv on 6s. Just got a big ass battery to try too. The V1S 3.5 are pretty much my main since I built it as a cruiser. However I have taken it on a harder Acro flight. It was a bit windy and I got some flutters. Defiantly going to give the 7056C a go for that maybe?
Try new Dalprop FOLD F7. The are surprisingly smooth
2207 and 2306 are 5 inch quad motors. Of course they're gonna struggle with a 7 inch prop - even when you do have a lighter one you may still have poorer performance. That's why you've gotta get something like a 2508 size motor.
I am running into the same problem. Limited prop choices for my 7" TBS Source One - BH Avenger V2 2507 1850kv 4-6S running 5S going mid/long range. Have you tried running 6 inch props? Tried all of these props you list also except Gemfan. Cyclone is my favorite so far for power, smoothness and thrust but its a power hog. HQ green doesn't bother me and I like those for flight time (10+ min) but makes my quad wobble like you mentioned. Good video, thanks for posting this, it will help others. Just think if you reviewed all the 5 inch props available how long that would take!!! ;)
Pawel you should re-visit this episode and test the new Gemfan Cinelifter 7035 tri-blade and the 7035 bi-blade! They are quite lightweight.
Unfortunately I do not have access to those props at the moment
2508 1275kv 6S if you want torque
garila x2507 1500kw with T7056c or Tarot 7 inch on 4S?
Hoping I can get a response, how do you feel about the old school 2212 motors? I've got a set i got for a build (in 2015 LOL) and now getting back into it. I feel like they should do great on a 4-6s 7 inch build. (1250k sunnysky 2212, 3-4s rating be dammed LOL)
Hi i have a genuine question for flight time on a 4s 7 inch what motor soze should i use. Im looking at the emax eco2 2807. Is that good for flight time range
I havnt flown in a long time but I use 2508 1450kv motors on 5s works well with the t7056c changing frame at the moment but what do you know / think of the gemfan flash 7040x3 ? thanks
Do you have any suggestions for an 8" version of the DAL Cyclone T7056C for freestyle use? To be used with iFlight XING 2806.5 1300kV motors on 6S. Thanks! I got the iFlight XL8 over the XL7 due to the thicker arms, but I'm struggling to find decent 8" tri-blade propellers.
now being 2021 GF LR7035 vs 7042 flash? Want to test a lot of props on Rekon7 for longest flight time/ distance
Hey what 7 inch props have you settled on? I have ordered all kinds of props to try one my build is finished
@@chrisbee5481 the GF 7035 cinelifter props what I was using most. Seemed to average best flight time & had decent lift. But I'm running 8" now
You need to balance your props with something like a Dubro in order to get the least vibration. Its critical.
you mean these modern 3 blade quad props aren't balanced enough from the factory?
Паша, привет.
Я английский не знаю можно как то русифицировать твои видео на Ютубе?
Субтитры мне только на английском предлагает
czcams.com/video/6r6EM4G0D44/video.html
What about KINGKONG/LDARC 7040 Triblades?
I flew today both my HGLRC m8n modules worked perfectly fine so the epoch rollover thing seems to be handled on this module.
apparently all Neo6 and later from Ublox handled the rollover nicely
Gemfan 7042 = Angry chicken
Best propellers is tarot 7045. But very fragile. Every fly ended by crack in the air. Anyway, i have with it longest flytime, fastest top speed and no vibration
Crack in the air? Does it disintegrate on itself midflight? I have them here but not tried them yet
DAL: please make a 5" low-pitch t-mount
You should try the new HQProp DP 7x4x3 (popo compatible)
hello Paweł im looking for 7 inch frame DJI FPV build , Could you help me ?
Zastanawiam się nad ramą 7"
Myślałem nad XL7 V3, Skystars G730L i Martian IV 7Inch
Która z nich będzie najlepsza do long range ?
A może jest jakaś lepsza ?
Chce żeby po zamocowaniu gopro session nie było widać śmigieł w kadrze.
Source One
A gdzie ją można kupić ?
no nie wiem... wysyłkowo w internecie?
No tak. Patrzyłem na stronę tbs. I nie mają chyba
Gootzeenobblin Zgobblen geuten knobgobblin ya?
What about racestar 2306 motor? I got this motor. Is it enough for 7 inch props...?
I'd say barely. It's less stator volume than 2207 and they are barely the size
@@FPVUniversity thx ;)
I use 2306 1600kv on my 7" longrange copter
Gemfan is good to 2506 racestar 1200kv?
2507 will work with all 7" props
Great info, dude! Thanks a lot. 😊
Question: 1700kv on 6s or 4s?
4s
@@FPVUniversity Great, thanks! 😊
That's what I suspected. 😊
I have tried all of these propellers(apart from green hq biblade) on my 7 inch build using 2514 motors, and I found the hqprop v1s 7×3.5×3 to give the smoothest video.
With the others I get a bit of jello.
Next I want to try Gemfan 7040 flash triblades. Have you used them, and what was your experience?
Any update about propellers?
HQProp 7x4x3 seem to be my prop of choice for long range cruiser now
@@FPVUniversity hm, I tried them on my freestyle 7" and looks like they are too soft, made terrible noise @full throttle
@@PiotrMarkiewicz Balance your props
If only T-Motor made the F80Pro in lower than 1900kv! That would be the perfect motor for 6s 7" flying!
i use F90, why not using this one? weight?
@@rolliseventeen exactly I currently use a F40Pro III 1600kv for 6s 6" and 4-6s 7" flying and it works perfectly fine. It's a very light quad tho. If I fly a heavier loadout (Like a 300g camera with 400g of batteries) then you can feel it not have enough response for proper stabilisation tho.
Id pay 20$ a set for dynamically balanced 7 inch props. So much disparity from one set to another from the same manufacturers.
can you get away with smaller motors (like a 2208) when you use 6s?
not so much. It will increase power by increasing rotation speed but not torque directly
I only use the HQ Slow Flyer 7x4 ... on TBS Endurance motors and a weight of nearly 1kg with the 360 cam ... or on 2207 BrotherHobby 1600kv ... biggest problem is that with any other prop I have to balance them
I have 2308, 2600kv.
thjis is not the KV for 7 inch props. I'd say 1800 is top on 4S for 7 inches
💓💓💓u sir
The Dal props are complete trash. The RH and LH molds dont even match.
Definitely a lack of 7 inch prop options plus 4 inch ones for smaller long range quads.
Wouldn't mind your opinions on this frame .. which I have to build up.. had to use Shapeways to print the longer top print which is not supplied but files are available due to the extra complexity of printing it.
mokaframe.com/moka-gravity/
Takes up to 7 inch props and is foldable. Incredibly robust.
Will fit a full stack on it's edge including a runcam split or like wise.
The centre of Gravity is very central with a look similar to a Mavic Pro
Clean air for the rear props.. I just flew the 3-4 inch version and you noticed the difference straight away..
Simple to set up Diversity Rx as well as space for GPS.