My 350z did the same thing with the windows when I got it. I found out that there is a “reset” button on the window motor itself that if you hold down for a certain amount of time it will “relearn” it’s position and operate properly. It does that because when you close your door the window lifts up a bit for a proper seal and sometimes it has to relearn that position. Try that before buying and replacing the motor. Nice videos!
Thank you! Funny you mentioned this, my driver inside AND outside door both handles went out like two weeks ago so I've been crawling in and out the passenger door every day lol Next video is how to fix this!🙌
On the window issue it’s actually not a sign to replace the motor. But just a sign that you need to relearn the auto up and down procedure which involves finding a button located behind the door panel.
The Penny trick works. I have had some in mine for years. Put as many as you can in there to where it pops open to where you like it. Another notorious item that may/will break are the door handles. I'm pretty easy w/ mine so I haven't had that issue yet.
Ill have to try out the penny trick! I've heard about the door handles, luckily I haven't had any issues with mine yet! I did some googling and I guess they mainly go out when someone tries to open the door, while its being unlocked/locked at the same time! Gotta be careful with that haha good to hear from you again my friend!
I had the issue with the door handle. The plastic piece inside broke apart and the cable can’t stay where it should be. Zip ties are easy fix compared with replacing the entire part for $150+. The only thing I can complain about this fix is it feels a bit lighter to pull the handle compared with the other/passenger side which is not broken yet
Although windows are common to go out on Z's and G'z, I don't think yours is bad, they just need to be re programmed so the motor can learn to stay closed
@@JohnnyB. I heard there was actually a little button under the door panel you can press to reset the motor...also heard you can double tap the window switch quickly to reset them aswell.
Hehe… yeah… 2003 z here. Replaced the window motors 2x on driver and once on passenger. Also done the struts for the hatch. Stoked about the trunk hatch spring things! Just learned to deal with it. So much better. Thanks bud
i shoot white silicone lubricant in the front window channels on the doors, makes them work way better in winter and cause less stress on the motor itself.
I need to do this...I fixed the window regulator a few months ago in a video, but it recently started going down again...will make a video addressing it soon! Thanks for tuning in🙏🏼
Hey! Thanks for your comment🙏🏼 i do normal interval oil changes around 3k miles! My car usually burns about a quart per month, so I’m adding it every now and then. When it comes time for the change, the oil isn’t even that bad because of topping it off with new oil pretty often. Mostly change just for the oil filter!
Just as a point to note because I've seen you say it in more than one video. The Rev Up actually got exhaust variable valve timing added, as well as having it on the intake cam. The normal DE already had it on the intake cam as well
hey johnny great video. i have recently purchased a 2005 revup g35 sedan manual from a one owner with 115k miles. It does not seem to burn alot of oil yet and sounds healthy. What would you recommend other than checking the oil for these engines? Is the timing chain or guides a weak point at all?
Hey Mo! Thanks for your comment, and congrats on your purchase!! The oil consumption is pretty random, with some cars burning more than others so you may have gotten one of the better ones! Also, the timing chain and guides were built to outlast the engine if you keep up with the oil changes! If you plan on tracking it often, then id suggest doing the timing chain a little later on just to be safe!🙌 Other than that, I'd just change the tranny fluid and you should be good for awhile!
So uhh everything is correct but your window goes back down after hitting the top??? Mine scares me because its the drivers side that is broken so its either not working or after hitting it hard enough for it to work it will hit the top and continue clicking not knowing its at the top
About a year ago my drivers door window would stop working and only would work when i hit the bottom of the door, or tried rolling it up as I closed the door to jiggle the motor. One day I rolled it all the way down and it never came back up haha I replaced the window motor and it solved my issue! I actually filmed the process and never uploaded it so maybe I'll try and edit that together soon! Only took me about 45mins - 1 hour to swap the motor! Appreciate your comment my friend :)
@@drift240sx9 it’s just a sensor that goes bad in this cars, it’s not hard to replace it but when people experience it, they freak out thinking is something serious lol
@@fredericom2650 it’s the Camshaft Position Sensor, there’s 2 on some Zs depending on your year and some have 3 if I remember right. You just got to do a scan and see which one is malfunctioning either bank A or B
Dang! Didn't think about the vent flaps, but I have seen a few cars where this is common. I'd assume ordering online or finding out of a parts car would be the best option! Thanks for tuning in man!🙏
5:12 you just have to pull the interior pannel out and do the reset presedure, i replaced mine because it woulding move up and down atall and this happened after a hour of installing the new regulator lol just reset it with the black button and should be good untill you unplug your battery
LMFAOOO i just bought an 06 350z and everything you said besides the alarm system happens to my car , i found that if you just hold the window button like it doesn’t have auto mode then it’ll stay , and my trunk won’t even fully close
Most of the things aren't actually such a bad thing. 350z are really low maintenance. But make sure to don't wreck it cause you're gonna spend so much money in changing many parts of the cars, and many cars aren't the same after a wreck, unless you make sure to replace everything properly, of course
So true!! Cars cost a lot to get put back to proper safety spec. Plus, the panel gaps will probably never be the same!😂 But overall the 350z is a very reliable car! Thanks for tuning in David!!
Also once the compression rod arm bolt attached to the frame rusts, the car is basically scrap metal because you would need to cut into the floor from the inside to replace it... Definitely don't drive on salty roads.
Thank you!! It's my favorite 350z wing as well! Here's a link to the wing! amzn.to/2zKqpOq This is an affiliate link by the way; doesn't change anything on your end, but it helps my channel out when you use it :) Thanks for your comment, Johnny!
Just a question is it Normal to smell like oil burning or burning oil which ever comes first haha like about a burnt smell (I use 10w-30 full synthetic)
Hey! Normally right after I top up, I usually smell oil burning but only during WOT and at a higher rpm(5.5k+). I’m using 10w-40 and don’t notice the smell as much, compared to the 5w-30 but it’s starting to get cooler out so I’ll probably switch back to 5w-30 for the winter! Shouldn’t be too big of an issue as long as you keep up with topping it off🤙
The window motor replacement is the most important trust me While you replace the window motors replace the lock motors at the same time Dont be like me and be unlucky as fuck and have the window stuck all the way down and the door not able to unlock
Greetings, I enjoy your channel and thoughts but I have a couple questions. I currently do not own a 350Z but I have the itch and are beginning to shop. I think my budget will allow w a 2006/2007. How many different models are there? I see "Touring" But but nothing else. Also, I saw one with the same rear wing as yours but no other ones had it. Is that after market? Any response would be helpful. TIA
Hey Larry! Great questions. There are a few different variations that I can list here for you. This is off a brochure for a 2004, keep in mind they changed the engine in 2005-2006, and 2007-2008. All options stayed the same though. 350z (base) -287 hp, 274 ft-lb of torque -6-speed manual tranny -17" aluminum-alloy wheels -Automatic Temp Control (ATC) -Tire Pressure Monitor System (TPMS) -CD audio System Enthusiast -Traction Control System (TCS) -LSD -HID -Aluminum pedals Performance -VDC -18" Aluminum-alloy wheels, and high performance tires Touring -Bose Audio System, 6 disk CD changer -Leather-appointed power seats -heated seats.mirrors Track -Brembo Braking system -super-lightweight 18" forged alloy wheels, and high performance tires -front chin spoiler -rear underbody diffusers, and rear spoiler Grand Touring Roadster -Brembo brakong system -VDC -TCS -LSD -6-speed manual tranny -18" aluminum-alloy wheels -Bose audio system -Leather-sppointed seats 35th Anniversary -chin spoiler -rear underbody diffusers, and rear spoiler -Special 18" cast aluminum wheels -Brembo Braking System -Special Z emblem -Available 2-tone leather-appointed seats -and more About the wing, I’ve read that it’s an option from the factory for the 2005-2006 350z, but I’m not sure if it was just specifically those years. One of my favorite wings for the Z! I know it’s a lot of info, but all good stuff to know🙏🏼 almost everything for the 350z was optional, so you may see some trim levels without certain things like a NAV screen, leather seats, etc… Thanks again for tuning in!
Hey Johnny, Great video. I just bought a 2005 350z 200000miles automatic not the manual You are right I have those issues. But did you come across any engine or transmission complaints. Please give me a heads up If any more related problems I need to know in advance. It is a super fun car and my daily commuter.
Hey! Thanks for your comment! That's actually a great question :) I'm leaving tomorrow for a drive up the coast of California and back! It should be just about 1000 miles or so. I'll cover it in my next video for you!🙌
You're absolutely right!! I replaced my driver side door handle about 3 months ago, and my passenger side just went out! I'll be fixing it in a video soon!
These issues are not a 350 z issues . there Nissan issues. I own a titan murano and sentra the same issues may apply to all. O and the rev up gained exhaust vvt the hr has intake vvt
Hi, I'm a girl, so easy on me ok lol. My cig lighters aren't working, I opened the kick box and located the fuse, I replaced it with the same size fuse i pulled out, a Blue 15-amp tiny toothless fuse and still don't work, I just seen a video where this dude is using a super-size 15 amp?
Hey Eric! I've heard no issues with oil consumption in the HR version! If you're referring to the VHR, I googled it and it says it doesn't have any issues either!🙌
Totally understand! This thing has been insanely reliable! Main expense over the last year and a half is rear tires, and that’s just because the camber shreds the inside. Other than that, topping off the oil every now and then, and that’s about it🤙
I’ve got a 06 Rev-up! Pretty sure it’s the base model with cloth seats. I googled and it says the Grand Touring 350z trim came with power seats and leather! Didn’t know😜
Google also says that the electric motors aren’t usually broken, but they get stuck! I guess you can reset it by unplugging the seat with the car off, then turn the electronics on for 20 seconds(don’t turn the motor), then turn off again. Plug the seat in, then start the car and it should accept new commands🤙
Definitely! A little bit quick, but if you take your time and learn the power at first; its definitely worth it!! Also, great car to learn manual in if you don't know how to drive manual! Thanks for tuning in🙌
Thank you!! I appreciate your feedback; I have noticed I make tons of cuts lol been working on it lately in my recent videos, I think they're getting better!🙌
Suggestion: slow down. You have a lot of information to give us, but speaking so quickly that you jumble and run-on your words hurts your presentation.
My 350z did the same thing with the windows when I got it. I found out that there is a “reset” button on the window motor itself that if you hold down for a certain amount of time it will “relearn” it’s position and operate properly. It does that because when you close your door the window lifts up a bit for a proper seal and sometimes it has to relearn that position. Try that before buying and replacing the motor. Nice videos!
Hey! I had no idea about this, and will definitely be trying it out soon! Thank you so much for the tip!🙌
Johnny B. You’re welcome! Hope it works! I’m tirelessly in the market for a 350z again so I’ll keep you posted if I get anything 👍🏼
That's correct, my Z does exactly the same!
what, how do people not know about this😂
Don’t forget about the door handles
If this isn’t the truest comment... watch my next video😂 don’t make the same mistake I did
Good video I would of added the coolant bleeder valve and the door handles for those 90 pound doors
Thank you! Funny you mentioned this, my driver inside AND outside door both handles went out like two weeks ago so I've been crawling in and out the passenger door every day lol Next video is how to fix this!🙌
On the window issue it’s actually not a sign to replace the motor. But just a sign that you need to relearn the auto up and down procedure which involves finding a button located behind the door panel.
The Penny trick works. I have had some in mine for years. Put as many as you can in there to where it pops open to where you like it. Another notorious item that may/will break are the door handles. I'm pretty easy w/ mine so I haven't had that issue yet.
Ill have to try out the penny trick! I've heard about the door handles, luckily I haven't had any issues with mine yet! I did some googling and I guess they mainly go out when someone tries to open the door, while its being unlocked/locked at the same time! Gotta be careful with that haha good to hear from you again my friend!
I had the issue with the door handle. The plastic piece inside broke apart and the cable can’t stay where it should be. Zip ties are easy fix compared with replacing the entire part for $150+. The only thing I can complain about this fix is it feels a bit lighter to pull the handle compared with the other/passenger side which is not broken yet
For the oil consumption test at the dealer, just drain your oil after the dealership started the test and refill about 2 qrts low
My G35 Coupe had the same issue with the window I did the reset and it works just fine now
Hey! Found out about the reset button in the door a little while ago! Saved me from having to buy an entire window regulator/motor haha
Awesome and thanks for the info. Congrats on being able to own that car at such a young age. Nice!
Anytime my friend! I really appreciate you watching and leaving a comment (: thank you!
Although windows are common to go out on Z's and G'z, I don't think yours is bad, they just need to be re programmed so the motor can learn to stay closed
Thanks for your comment! I appreciate you!🙌 I wasn't actually sure that a reprogram was possible! I'll be looking into it in a future video :)
@@JohnnyB. I heard there was actually a little button under the door panel you can press to reset the motor...also heard you can double tap the window switch quickly to reset them aswell.
@@xXCigarXx It's true! Fixed my window with the reset button under the door panel in a recent video I posted! Worked like a charm!
Hehe… yeah… 2003 z here. Replaced the window motors 2x on driver and once on passenger. Also done the struts for the hatch. Stoked about the trunk hatch spring things! Just learned to deal with it. So much better.
Thanks bud
Thanks for the heads-up! I already have 2 of those issues to tackle soon.
i shoot white silicone lubricant in the front window channels on the doors, makes them work way better in winter and cause less stress on the motor itself.
Good thinking, I should probably lube mine as well. Will do this soon. Thanks for tuning in🙏🏼
@@JohnnyB. white lithium grease, my bad.
I cleaned and replaced the brushes in my window motors. Less than £5 to fix both + the time bout 6hrs
I need to do this...I fixed the window regulator a few months ago in a video, but it recently started going down again...will make a video addressing it soon! Thanks for tuning in🙏🏼
I love ya Johnny B 😂
When you say it burns a lot of oil, you refer it needs oil changes constantly or just adding oil??
Hey! Thanks for your comment🙏🏼 i do normal interval oil changes around 3k miles! My car usually burns about a quart per month, so I’m adding it every now and then. When it comes time for the change, the oil isn’t even that bad because of topping it off with new oil pretty often. Mostly change just for the oil filter!
Most of the revup have these issues.
Just as a point to note because I've seen you say it in more than one video. The Rev Up actually got exhaust variable valve timing added, as well as having it on the intake cam. The normal DE already had it on the intake cam as well
I was thinking the same thing when I heard him say that
You forgot about the console door.... but I still love Z cars
hey johnny great video. i have recently purchased a 2005 revup g35 sedan manual from a one owner with 115k miles. It does not seem to burn alot of oil yet and sounds healthy. What would you recommend other than checking the oil for these engines? Is the timing chain or guides a weak point at all?
Hey Mo! Thanks for your comment, and congrats on your purchase!! The oil consumption is pretty random, with some cars burning more than others so you may have gotten one of the better ones! Also, the timing chain and guides were built to outlast the engine if you keep up with the oil changes! If you plan on tracking it often, then id suggest doing the timing chain a little later on just to be safe!🙌 Other than that, I'd just change the tranny fluid and you should be good for awhile!
3:39
BRO 🤣 I got the 06’ just like yours I be dealing with the same shit with my trunk 💀
Most relatable video ever
There’s a giant pool of something below his car at 5:35 🥲
So uhh everything is correct but your window goes back down after hitting the top??? Mine scares me because its the drivers side that is broken so its either not working or after hitting it hard enough for it to work it will hit the top and continue clicking not knowing its at the top
About a year ago my drivers door window would stop working and only would work when i hit the bottom of the door, or tried rolling it up as I closed the door to jiggle the motor. One day I rolled it all the way down and it never came back up haha I replaced the window motor and it solved my issue! I actually filmed the process and never uploaded it so maybe I'll try and edit that together soon! Only took me about 45mins - 1 hour to swap the motor! Appreciate your comment my friend :)
Great video!
Thanks man! I appreciate you!🙌
If you haven’t joined the club yet you will eventually join us, I promise you that...”welcome to code P0340” 🤣
Oh dang haha not looking forward to that :D Thanks for the heads up xD
What is that
@@drift240sx9 it’s just a sensor that goes bad in this cars, it’s not hard to replace it but when people experience it, they freak out thinking is something serious lol
@@eclipseotik I think I might have that code on my car. Is it the 02 sensor? Which sensor is it?
@@fredericom2650 it’s the Camshaft Position Sensor, there’s 2 on some Zs depending on your year and some have 3 if I remember right. You just got to do a scan and see which one is malfunctioning either bank A or B
2 & 3 !!! do all these trunks break in the same way???? LOL.
idk if this is a real fix to it but ive heard some people add an oil catch can for the oil leak issue
I’ve heard they help!! I’ve been looking for a good one, and think I finally found the one I want. Will do an update video on the catch can soon🙏🏼
My AV vent flaps are broke to, can't even find a fix or replacement in the UK
Dang! Didn't think about the vent flaps, but I have seen a few cars where this is common. I'd assume ordering online or finding out of a parts car would be the best option! Thanks for tuning in man!🙏
5:12 you just have to pull the interior pannel out and do the reset presedure, i replaced mine because it woulding move up and down atall and this happened after a hour of installing the new regulator lol just reset it with the black button and should be good untill you unplug your battery
Does anyone know where I can get that wing?? Thanks in advance 🤞🏽
I replaced my truck lid struts for $20-$50/pr. Armstrong struts get good reviews. eBay. No need to spend $80 at the stealership.
LMFAOOO i just bought an 06 350z and everything you said besides the alarm system happens to my car , i found that if you just hold the window button like it doesn’t have auto mode then it’ll stay , and my trunk won’t even fully close
Most of the things aren't actually such a bad thing. 350z are really low maintenance. But make sure to don't wreck it cause you're gonna spend so much money in changing many parts of the cars, and many cars aren't the same after a wreck, unless you make sure to replace everything properly, of course
So true!! Cars cost a lot to get put back to proper safety spec. Plus, the panel gaps will probably never be the same!😂 But overall the 350z is a very reliable car! Thanks for tuning in David!!
One thing you missed was the inner lower control arm bushing. It was probably already replaced before you bought your car.
Also once the compression rod arm bolt attached to the frame rusts, the car is basically scrap metal because you would need to cut into the floor from the inside to replace it... Definitely don't drive on salty roads.
Windshield wiper cleaner tubes perish and need replacing. Not too hard, but difficult without the right tubing/tools.
Acknowledged, have had them all 😊
At least i'm not the only one! haha thanks Dennis for your comment, I appreciate you!🙌
What spoiler is that?
Like that wing hermano, I need one for my Z. Were can i find one like this???
Thank you!! It's my favorite 350z wing as well! Here's a link to the wing! amzn.to/2zKqpOq This is an affiliate link by the way; doesn't change anything on your end, but it helps my channel out when you use it :) Thanks for your comment, Johnny!
Just a question is it
Normal to smell like oil burning or burning oil which ever comes first haha like about a burnt smell (I use 10w-30 full synthetic)
Hey! Normally right after I top up, I usually smell oil burning but only during WOT and at a higher rpm(5.5k+). I’m using 10w-40 and don’t notice the smell as much, compared to the 5w-30 but it’s starting to get cooler out so I’ll probably switch back to 5w-30 for the winter! Shouldn’t be too big of an issue as long as you keep up with topping it off🤙
I have an 04 touring edition with oil loss does that year have the ring issue?
Hey Frankie! Although most common with 05-06 models, some 03-04 cars did have the issue as well. I appreciate your comment! :)
I have all the rear hatch issues but nothing else in this video atleast lol
Good video lots of info super Ron uk 🇬🇧🇺🇸🇺🇸👍🏆
Thanks Ron! I appreciate you for returning each upload. It really does mean a lot!
Very accurate video for Z owners lol
Got almost all of these on mine haha
The window motor replacement is the most important trust me
While you replace the window motors replace the lock motors at the same time
Dont be like me and be unlucky as fuck and have the window stuck all the way down and the door not able to unlock
Door handles, Camshaft and crankshaft position sensor.
Don’t forget sensors, radiator, windshield wiper pump, etc
Greetings, I enjoy your channel and thoughts but I have a couple questions. I currently do not own a 350Z but I have the itch and are beginning to shop. I think my budget will allow w a 2006/2007. How many different models are there? I see "Touring" But but nothing else. Also, I saw one with the same rear wing as yours but no other ones had it. Is that after market? Any response would be helpful. TIA
Hey Larry! Great questions. There are a few different variations that I can list here for you. This is off a brochure for a 2004, keep in mind they changed the engine in 2005-2006, and 2007-2008. All options stayed the same though.
350z (base)
-287 hp, 274 ft-lb of torque
-6-speed manual tranny
-17" aluminum-alloy wheels
-Automatic Temp Control (ATC)
-Tire Pressure Monitor System (TPMS)
-CD audio System
Enthusiast
-Traction Control System (TCS)
-LSD
-HID
-Aluminum pedals
Performance
-VDC
-18" Aluminum-alloy wheels, and high performance tires
Touring
-Bose Audio System, 6 disk CD changer
-Leather-appointed power seats
-heated seats.mirrors
Track
-Brembo Braking system
-super-lightweight 18" forged alloy wheels, and high performance tires
-front chin spoiler
-rear underbody diffusers, and rear spoiler
Grand Touring Roadster
-Brembo brakong system
-VDC
-TCS
-LSD
-6-speed manual tranny
-18" aluminum-alloy wheels
-Bose audio system
-Leather-sppointed seats
35th Anniversary
-chin spoiler
-rear underbody diffusers, and rear spoiler
-Special 18" cast aluminum wheels
-Brembo Braking System
-Special Z emblem
-Available 2-tone leather-appointed seats
-and more
About the wing, I’ve read that it’s an option from the factory for the 2005-2006 350z, but I’m not sure if it was just specifically those years. One of my favorite wings for the Z!
I know it’s a lot of info, but all good stuff to know🙏🏼 almost everything for the 350z was optional, so you may see some trim levels without certain things like a NAV screen, leather seats, etc… Thanks again for tuning in!
Love this channel! I have a 2004 350z roadster. My driver door closed on it’s own. Is it an easy fix??
I hope you don't get the throttle body issue p0507 it's not the easiest fix. I bought 3 throttle bodies already and still not fixed
Hey Johnny, Great video. I just bought a 2005 350z 200000miles automatic not the manual You are right I have those issues. But did you come across any engine or transmission complaints. Please give me a heads up If any more related problems I need to know in advance. It is a super fun car and my daily commuter.
Has it given you any problems yet ?
What's your wheel setup? My son an I are trying to figure what to do with his 06'.
Would also like to know the same
is the 350z a good car for 1000+ mile road trips?
Hey! Thanks for your comment! That's actually a great question :) I'm leaving tomorrow for a drive up the coast of California and back! It should be just about 1000 miles or so. I'll cover it in my next video for you!🙌
@@JohnnyB. Thank you very much! I currently live in Finland and soon moving to Czech Republic. Just wondering if the z is good for the long trip.
my 04 z alarm goes off when you open the passenger door no matter what, what should i do?
Door handles too bro
You're absolutely right!! I replaced my driver side door handle about 3 months ago, and my passenger side just went out! I'll be fixing it in a video soon!
So those springs u can rebuild with springs from tractor supply or a store like it
What's that fluid under the car. It wasn't there at the beginning
Ooh that's condensation from the A/C! I sat there for awhile with the A/C on while writing in my book haha
6:00 just ignore the 1000 pound freak of nature in the background.
These issues are not a 350 z issues . there Nissan issues. I own a titan murano and sentra the same issues may apply to all. O and the rev up gained exhaust vvt the hr has intake vvt
Ahh I see. Thanks for mentioning that. I wasn’t sure if these were specific to the 350z!
Hi, I'm a girl, so easy on me ok lol. My cig lighters aren't working, I opened the kick box and located the fuse, I replaced it with the same size fuse i pulled out, a Blue 15-amp tiny toothless fuse and still don't work, I just seen a video where this dude is using a super-size 15 amp?
Does the oil Consumption issue occurs with the 350 ZHR as well
Hey Eric! I've heard no issues with oil consumption in the HR version! If you're referring to the VHR, I googled it and it says it doesn't have any issues either!🙌
Johnny B.
Cool thanks I’m planning on getting 350z and want to know all the maintenance details
Totally understand! This thing has been insanely reliable! Main expense over the last year and a half is rear tires, and that’s just because the camber shreds the inside. Other than that, topping off the oil every now and then, and that’s about it🤙
Who saw the leak at the end
XD Luckily it was just A/C condensation from idling there for so long! Appreciate your comment Ty!
Reset the window…remove door panel and locate reset button
lol fuck I've replaced my driver side window motor 2x and passenger side once over the 8 years I've owned my 350z
You mentioned the motor on the windows but not the motor in the electric seats🙄
This is actually a really good point I didn’t think about! My Z didn’t actually come with power seats!
Johnny B. Oh really? What model again
I’ve got a 06 Rev-up! Pretty sure it’s the base model with cloth seats. I googled and it says the Grand Touring 350z trim came with power seats and leather! Didn’t know😜
Google also says that the electric motors aren’t usually broken, but they get stuck! I guess you can reset it by unplugging the seat with the car off, then turn the electronics on for 20 seconds(don’t turn the motor), then turn off again. Plug the seat in, then start the car and it should accept new commands🤙
Johnny B. Oh well we both learned something bro
But got a 2004 so i don’t think I qualify😂
im pretty sure the warranty is expired on a 2007 haha
I have the rear latch issue lol
Not the window motor you need to reset the limiter, easy fix.
bro theres a button above the license plate to unlock the back.
bro tighten your bumper cover to the fender fix that gap....
XD I’ve repainted the car and fixed the issue since this video! I appreciate you for tuning in🙏🏼🙌
@@JohnnyB. right on I'm a bodyman so it really stuck out good video tho...
Can anybody confirm or deny the engine warranty? I have a de tho :/
is it good for first car?
Definitely! A little bit quick, but if you take your time and learn the power at first; its definitely worth it!! Also, great car to learn manual in if you don't know how to drive manual! Thanks for tuning in🙌
@@JohnnyB. thank you
Do 350z have cabin air filter?
Is his z leaking on camera? 5:38
I thought the rev up has two throttle bodies
I believe the 07 and 08 350z’s are the only year that have dual throttle bodies along with the dual intakes! Appreciate you tuning in🙏🏼
My car stutters and sputters then stops
Are you leaking oil ???? I could see a black liquid or something coming from you’re passenger side tire?!!! Explain
Not leaking oil!🙏 Just some A/C condensation from being parked there with the engine running for awhile :) I appreciate your concern my friend!
@@JohnnyB. phew scared the shit out of me man 😮💨
is that OIL leaking from under the car? LOL
passenger side
I need that warranty
Rock Auto has the hatch struts for cheap.
I'll definitely have to check those out! Thanks for the heads up!🙌
Hey bro car looks good, which front spillter do you have?
Question, the thing that says v6, what I'd that called
Engine cover?
@@brandongao3675 ohh thanks lol
i really want to know where you got that bumper
Hey! The bumper is stock, but the lip is from Vicrez! It’s the N3R Style front lip!
@@JohnnyB. I like the stock look I'm gonna look into getting it for my Z appreciate it
I like the stock look too! No problem man!🙌
Good video, keep it up! But so many edit cuts 🥴🥴🥴
Thank you!! I appreciate your feedback; I have noticed I make tons of cuts lol been working on it lately in my recent videos, I think they're getting better!🙌
Looks like he has an oil leak😂
I think you’re leaking oil
Your car peed
Suggestion: slow down. You have a lot of information to give us, but speaking so quickly that you jumble and run-on your words hurts your presentation.
Hey! Thank you for the feedback!🙏 I appreciate you tuning in!