GEPRC Mark 4 Clone Build - 04. ESC Install

This is a build series of the GEPRC Mark 4 Clone Frame (5 inch)
In this video I install the ESC onto the frame and solder the motor wires on. I also go through testing the ESC and motors as well to ensure everything is soldered properly.
-- Playlist for the rest of the build --
• GEPRC Mark 4 Clone Build
-- Quadcopter Components --
-- Frame --
GEPRC Mark 4 Clone (5 inch)
s.click.aliexpress.com/e/_AonxXh
-- Flight Controller + ESC Stack --
Omnibus F4 V3S Plus
45amp 4in1 (55amp burst)
s.click.aliexpress.com/e/_Ag7spp
-- Motors --
iFlight Xing 2207 2750kv
s.click.aliexpress.com/e/_9JLbuj
-- Video Transmitter (VTX) --
Eachine TX805
s.click.aliexpress.com/e/_ASdxLt
-- Camera --
Caddx Ratel 2
s.click.aliexpress.com/e/_AVkP07
-- Radio Receiver --
Radiomaster R81 (FrSky D8 Mode)
s.click.aliexpress.com/e/_Aaf2Uf
-- Radio Controller --
Jumper T-Lite (JP4IN1 Version)
s.click.aliexpress.com/e/_ATQAE3
-- Smoke Stopper --
ViFly ShortSaver 2
(handy accessory to prevent electrical shorts)
Email
[e-mail]

[@dl8748]

This is amazing. Thanks so much for the content!!!

[@suji99hettiarachchi]

Hi.I bought flight controller stack mounting by 20mm to 20mm screw by M3 type of screw, hence I bought flight controller stack can only fit by M3 type of screws,I measured the Ready To Sky brand Mark4 5 inch frame has small size of 20mm to 20mm holes to install the stack but I bought stack can only Mount by M3 type of screws so please tell me what I do for to get M3 type of screws holes to 20mm to 20mm mounting holes?
please reply to these questions as soon as possible.

[@sercanalnca1962]

I bought the same quad but it didnt include any manual so i watched your video. It was veryy helpful. I’ve got 30A esc. Which capacitor that i need it for better noise filtering? How much volts and farad?

[@nxp200]

Apologies for late response. I use 35v 560uf Low ESR capacitors.

[@suji99hettiarachchi]

Hi,is this Ready To Sky brand Mark4 5 inch FPV drone frame kit can fit these following components
(1) RS2205 pro brushless motors
(2) 20mm to 20mm M2 or M3 screw can mount flight controller stack(I bought the HGLRC zeus F728 stack so it can fit to this frame perfectly??)
(3) 14mm to 14mm or 19mm to 19mm width has FPV camera (I bought the caddx ANT 1200TVL FPV camera)
(4) 5045 propellers
as I mentioned these components can fit to this Ready To Sky brand Mark4 5 inch frame kit ??
Please reply to this question as soon as possible

[@Wuzz7]

19x19 camera. Yes it will fly ok

[@andytheman72]

Nice man. Can this frame take 51XX props, or is it limited to 50XX?

[@nxp200]

This frame takes 51XX props. I've got iFlight Nazgul 5140 and also Gemfan Flash 5149 that both fit and work great with this frame.

[@andytheman72]

@@nxp200 Thx for quick reply!

[@gtaitbiz7787]

is there an all in one esc for the dji naza?

[@djaseniro]

It has that in Speedybee

[@bandungfpvinaction]

Nice. I would like to learn how to build a quad.

[@nxp200]

It's a great hobby. Plenty of tutorials on CZcams that has helped me build my own and be able to make my own videos too! Happy to help if you have any questions.

[@bandungfpvinaction]

@@nxp200 thanks. Now I am confident to buy the parts, and watch your videos to build my first built. So far I am buying BNF or PNP quads.

[@saikowtham53]

can i fit APM controller
on mark4 frame ?

[@nxp200]

Sorry. I have not used APM controllers or Ardupilot before.

[@user-sr4yg9kg3b]

do i really have to get a 100 c rate battery ??

[@nxp200]

I don't pay attention to the C ratings that the manufacturer put on the label. I go by reputation of brand and reviews of others. I haven't had any issues with GNB, CNHL or Tattu branded LIPOs.

[@user-sr4yg9kg3b]

ok that was very helpful thank
you very mush@@nxp200