Philips 49 PUS 7909 continuously restarts

Sdílet
Vložit
  • čas přidán 8. 09. 2024
  • Philips TV, 49PUS7909 model. After 2 weeks of work no longer included, reboot loops. TV can not get started. Perfect quality from branded manufacturer.

Komentáře • 134

  • @soorajm1947
    @soorajm1947 Před 5 lety +12

    I had the same problem with Phillips android tv. The technician said the main board faulty. it's only been 1 year. cost 160 dollars. won't buy Phillips product again.

    • @angelaking599
      @angelaking599 Před rokem

      Thank you for comment even though it's a old comment but helpful I literally never had this problem with my other brands of TV's

  • @user-vz8hs1ps4f
    @user-vz8hs1ps4f Před 2 lety +2

    Решение найдено, господа!) Выключаем из разетки, потом держим джостик на телевизоре вниз и не отпуская джостика втыкаем в разетку, ждем.... ждем... и запускается что-то похожее на BIOS. А там выбираем сброс (предпоследняя строчка), потом строчку со словом"yes", ждем окончания сброса и через это же меню перезагружаем, радуемся)

    • @azeem04
      @azeem04 Před 2 lety +2

      Works like a charm. A lots of love dear. You revived my TV that was dead for the last two years.
      Bundle of thanks.

    • @eeguner
      @eeguner Před rokem

      Итак, сколько времени занимает этот процесс?
      Он был на экране удаления около 20 минут.

    • @RahmanDermaku97
      @RahmanDermaku97 Před rokem

      Hallo zusammen habe denn gleichen Fehler was soll ich jetzt am besten machen ? Würde mich freuen wenn sie mir antworten danke

    • @SilvioAk
      @SilvioAk Před 5 měsíci +1

      ​@@RahmanDermaku97i dont know have you a solution?

    • @vladz-07
      @vladz-07 Před 3 měsíci

      Всё сделал как вы написали, появилось меню, но джойстик в меню не переключает. Попробовал пультом, с пульта получилось, но увы, всё тоже самое

  • @theodp9533
    @theodp9533 Před 4 lety +6

    I had almost the same problem - not so intense though, it just restarted sometimes every 15-20 minutes - with a 47pfh6309/88. Yesterday after having tried almost everything I could think (disconnecting every device, factory resetting, flashing with older firmware, etc.) I tried disabling ambilight. Till now, it seems like restarts have stopped. Try this before you contact a repair center.
    edit: Eventually ambilight was not the problem. It kept rebooting even with ambilight set to off after some hours. Problem solved when I disabled wifi and connected the TV through an ethernet cable. I don't know why exactly but as some other reports that I've found connection to some AP's can cause similar problem.

    • @freedomo9
      @freedomo9 Před rokem

      I have almost the same problem (while I’m watching on streaming apps the TV suddenly restarts itself) and I found on Google that : “An app that uses a lot of memory of the TV for buffering (video streaming apps) can cause the TV to reboot or freeze. Ensure a steady, high quality network connection for the use of these apps.” And I didn’t want to change the internet provider to fix the issue, but now tomorrow I will install the internet cable and I will come with the update. Cheers in advance. :)

  • @dmitrij8706
    @dmitrij8706  Před 9 lety +1

    Проработав 2 недели, перестал включаться. Т.е. при включении в розетку не проходит начальную стадию загрузки, зацикливается в ребут. Скачков напряжения не было, изменений по подключенным интерфейсам за эти 2 недели тоже не было. Сборка российская, раньше хотя бы от 42 дюймов шла венгерская.
    Досадный прецедент, учитывая, что безоговорочно отдавал предпочтение телекам фирмы Philips, и это 4-й телек фирмы в личном опыте.

  • @MyMixedFamily1
    @MyMixedFamily1 Před rokem +1

    I think this is the problem with all of them philips. Mine too, if i dont have the wi fi connected the tv works fine. So long i connect the wi fi it seems after some while its restarts itself.

  • @sajjadali-pk3wk
    @sajjadali-pk3wk Před 5 lety +2

    try removing small wifi board from main board if this works for you change or repair you wifi board

    • @apKMKR
      @apKMKR Před 4 lety

      Cómo quitar una placa WiFi

  • @mesch1997
    @mesch1997 Před 9 lety +1

    у меня тоже Филипс 47pfs7309/60 сломался даже года не прошло . проблема почти аналогичная : завис на одном из каналов и не переключается . звонил на горячую линию Филипс попросили специальную прошивка установить но увы не помогло . завтра повезу на ремонт .

  • @dobidobitv3737
    @dobidobitv3737 Před 6 lety +1

    Aynı arıza bende de var garanti varken açılıp kapanmama yapıyordu arasira şimdi bunun aynı oldu yani 2 yıl garanti çok az ayriyeten bu bence kronik bir arıza

    • @mihamil9846
      @mihamil9846 Před 5 lety

      merhaba nasil cozdun harizayi tesekkurler

    • @OGERTY
      @OGERTY Před 4 lety

      @@mihamil9846 Merhaba, sen çözebildin mi, aynı sorun bende var şimdi?

    • @mihamil9846
      @mihamil9846 Před 4 lety +1

      @@OGERTY merhaba attim depoya hic ugrasamadin.

  • @catalinrus8491
    @catalinrus8491 Před 9 lety +1

    i have exacly same type but mine doesn't start...

  • @ertanuyguner7849
    @ertanuyguner7849 Před 5 lety

    Bende de aynı sorun var. Yorumları okuduktan sonra sol arkadaki açma kapama düğmesinin kapağını söküp aşağı doğru sonra yukarı doğru basılı tuttum. Sonra birden açıldı. Siz de deneyin isterseniz

    • @mihamil9846
      @mihamil9846 Před 5 lety

      merhaba bana yardim et nasil cozdun sagol.

    • @ertanuyguner7849
      @ertanuyguner7849 Před 5 lety

      Donanım haber e ayrıntılı yazdım. 55pus7909 ile aratırsan iyi olur

  • @danielff7478
    @danielff7478 Před 3 lety +1

    I have the same problem. Did you find the solution?.

  • @olegplevanyuk616
    @olegplevanyuk616 Před 9 lety

    Кажется мне, что у Вам просто неудачный аппарат попался. Мой работает без ошибок,тьфу-тьфу. Была в начале проблемка с Хромом - он просто не открывался, но проблема быстро решилась - После ночного простоя без питания, при следующем включении ТВ нашел обновления, установил их и после этого все стало на свои места. Наличие полноценного браузера - очень полезная штука! Отмечу следующее:
    1) Быстрый, на практике тормозов не заметил, только при загрузке 2) Андроидовские игрухи не тормозят 3) Можно переместить приложения на внешний диск 4) При некоторых манипуляциях можно разблокировать "unknown sources" и устанавливать любые приложения, правда качать их не из маркета 5) xbmc стал и запустился

    • @dmitrij8706
      @dmitrij8706  Před 9 lety +1

      Да, возможно. Потому что после замены по гарантии на аналогичный, он работает без нареканий с конца января.
      В целом девайс неплохой, со своими минусами, но и не без достоинств.
      Из недостатков хотелось бы отметить:
      1. Плавность (digital narutal motion) не работает в режиме 3D
      2. Нет настроек глубины 2D-3D
      3. Малый угол обзора 3D, чуть ниже или выше середины - полэкрана двоится
      4. Опция ClearLCD, повышающая отклик матрицы, всегда неактивна
      5. ТВ в 90% случаев не может открыть все файлы "каталог медиаресурсов" через DLNA по проводной сети
      6. Аналогично не всегда открывается список всех файлов с USB
      7. Вся андроидная часть работает в FullHD а не в 4k, т.е. все программы нечёткие, включая галереи изображений, браузер и прочее
      8. Не играются 4k файлы (но это мелким шрифтом указано в документации)
      9. Очень некачественный алгоритм уменьшения фотографий до 4k (nearest neighbor), фотки с зеркалки портит
      10. В режиме слайдшоу по красной кнопке все фотографии сжимаются до FullHD а не 4k
      11. Иногда вертикальные фотографии непропорционально растягиваются на весь экран
      12. При просмотре фотографий с середины списка невозможно пролистать предыдущие фотографии, выкидывает в список файлов
      13. Не передаётся 5.1 звук по HDMI Arc при DLNA/USB просмотре, несмотря на включенную настройку "выводить звук в многоканале"
      14. Не всегда срабатывает HDMI Arc, приходится перезагружать ресивер и ТВ
      15. Нет детектирования чёрных полей в ТВ режиме (автоформат) и алгоритма нелинейного растяжения 4:3->16:9, которое было во всех тв за последние 8 лет, в том числе и в моих 2-х предыдущих Philips
      16. По DLNA/USB нет информации о видеофайле (о разрешении видео, о звуке, каналах)
      18. Матрица 60Hz, на более дорогих моделях 4k матрица 120Hz

    • @akangel7298
      @akangel7298 Před 7 lety

      Слушайте! Прошу прощения. А откуда у Вас информация по поводу матрицы с частотой 60Hz? Или это личным ощущениям? Тут же вроде как самсунговская VA-120hz, модель то серии 7-й. По идее должно быть 100 герц.

  • @rumel2002
    @rumel2002 Před 2 lety

    I have had the same problem. All yoiu need to upgrade softwire

    • @blueoceans4366
      @blueoceans4366 Před 2 lety

      Doesn’t work unfortunately. Tv is completely unresponsive to any kind of usb I put in

  • @emmasurajwanshi7600
    @emmasurajwanshi7600 Před 3 lety

    When you want to currys PC world it will go on and off and the plug and a remote will go up to your USB cable or USB port on your phone

  • @silasfruh7379
    @silasfruh7379 Před 7 lety

    What was the result?

  • @KeremEditss3
    @KeremEditss3 Před 6 lety

    Bu tv nin aynisi vardi bende 2016 tuketici hakem heyetine verdim ve parami iade ettiler.

    • @aykutunsal4017
      @aykutunsal4017 Před 6 lety

      Bendede var aynisi garantisi biteli 2 ay oldu ayni arizayi veriyor
      Bende başvursam heyete paramı geri alabilirmiyim.

  • @dobidobitv3737
    @dobidobitv3737 Před 6 lety

    Toplasan 1000 saat anca çalışmıştır sanırım .. ilk önceleri Kendi kendine kapanıp açılıyor du. Sonra ses çıkmadı son olarak bu. Garanti de bitti 4 ay önce . Bundan sonra bin TL verip ucuz bişey alacağım

    • @moza19802000
      @moza19802000 Před 5 lety

      aynen tv çöp.2 kere servise gitti anakart değişti yine arıza.bunu philipsin götüne sokacaksın aslında bile bile arızalı ürün satıyorlar

  • @emrahtanrverdi79
    @emrahtanrverdi79 Před 2 lety

    Aynı sorunu şuan bende yaşıyorum 2 yıldır öyle duruyor çok pişmanımm

  • @florindoru4129
    @florindoru4129 Před 7 lety +1

    I have the very bad TV brand on the same issue

    • @freddyen
      @freddyen Před 6 lety +2

      as mentioned to others commenting on this:
      "Yes!
      When you remove the backside of the TV, you will find a PCB/board with the powersupply and a PCB with the CPU.remember to remove the interface cable for the ambilight, you gain access to it by removing the shield around the joystik at the down right corner of the backside of the screen
      remove the board with the CPU, remember to remove interface cables so you can turn the board around and look at the backside.
      When you look at the backside, you will find 3 massive thermalpads.
      Thermalpads are made by silicone, among others, those pads, might be "sweathing", during long periods of heeattransfer, so take a piece of toiletpaper, and gently remove the sweath from the pad and the board.
      Dry the board with a hairdryer after you remove the moist on it and assemble the tv and remember the ambilight :)
      Let me know how it works."

    • @Clasic6
      @Clasic6 Před 5 lety

      @@freddyen
      It works as you said!
      Philips 55put6401 resuscitated by your method!
      Thank you very much!!!

    • @freddyen
      @freddyen Před 5 lety +1

      @@Clasic6 your TV works again? :) its always great to have positive feedbacks, thank you so much!! =)

    • @freddyen
      @freddyen Před 5 lety

      @@Clasic6 btw, i know how to allow the "unknown scources" in the android options, that way you can install the pornhubap...uhm... kodi and stuff! ^^

    • @haniabdelnasser3469
      @haniabdelnasser3469 Před 4 lety

      Freddy Kristensen . I have same problem

  • @Dive86Master
    @Dive86Master Před 6 lety +1

    Anyone has solved this issue!!?

    • @freddyen
      @freddyen Před 6 lety +1

      Yes!
      When you remove the backside of the TV, you will find a PCB/board with the powersupply and a PCB with the CPU.remember to remove the interface cable for the ambilight, you gain access to it by removing the shield around the joystik at the down right corner of the backside of the screen
      remove the board with the CPU, remember to remove interface cables so you can turn the board around and look at the backside.
      When you look at the backside, you will find 3 massive thermalpads.
      Thermalpads are made by silicone, among others, those pads, might be "sweathing", during long periods of heeattransfer, so take a piece of toiletpaper, and gently remove the sweath from the pad and the board.
      Dry the board with a hairdryer after you remove the moist on it and assemble the tv and remember the ambilight :)
      Let me know how it works.

    • @haniabdelnasser3469
      @haniabdelnasser3469 Před 4 lety

      Freddy Kristensen ًُ

  • @audiosila
    @audiosila Před 7 lety

    Вот и мой 65PUS9109/12 через 1 год и 11 месяцев 13.02.17 перешёл в этот режим старт-перезагрузка. Печалька. Кто знает как лечить буду благодарен.

    • @dmitrij8706
      @dmitrij8706  Před 7 lety

      Юрий, если удастся найти решение проблемы, отпишитесь, пож-ста, здесь.

  • @allex-pro736
    @allex-pro736 Před 5 lety

    такая же беда только с philips 55pus7909 как исправить то?????
    у меня проработал 2 года и теперь такая же шляпа

    • @dmitrij8706
      @dmitrij8706  Před 5 lety

      Самому исправить мне не удалось, только сервис. Мне повезло, что был ещё на гарантии. Подозреваю, что это болячка.

    • @user-vz8hs1ps4f
      @user-vz8hs1ps4f Před 2 lety

      Есть решение

    • @Skalper740
      @Skalper740 Před 2 lety

      @@user-vz8hs1ps4f tak gde ono i kakoje?? Est est no nenapishesh....

  • @tomasshtermeni377
    @tomasshtermeni377 Před 7 lety

    Same problems can you help me?

  • @SayWhaaaaaaaaaaaaaaaaaaaaaaat

    awful backlight bleed even at DAY!

  • @ertanuyguner7849
    @ertanuyguner7849 Před 5 lety

    Donanım haber de ‘’Philips 55PUS7909 Açılma Sorunu’’ şeklinde bir konu açtım. Bu sorunu yazılımı yenileyerek çözdüm. Mesaj atarsanız yardımcı olmaya çalışırım.

    • @ljupcopetreski8586
      @ljupcopetreski8586 Před 5 lety

      Hello. How do you fix this problem please tell me? Best Regards.

    • @ertanuyguner7849
      @ertanuyguner7849 Před 5 lety

      www.donanımhaber.com go this site. And search on forum ‘philips55PUS7909 Açılma sorunu’
      I writed everting. You can translate vith google

    • @OGERTY
      @OGERTY Před 4 lety

      Kardeş donanımhberdeki başlığını okudum aşağı tuşa basarak girdiğin ekrana ben giremiyorum işte başka sitelerde de önerilmişti bu. Bi kere tv şans eseri açıldı sonra gene kapandı yine aynı şey 5 dk sonra. Senin şu tamirci arkadaşına ben de bi götürmek isterim hem o da ekmek kazansın. Adresi verirsen... Teşekkürler. Bu arada istanbuldayım.

    • @sebaatsebatin5026
      @sebaatsebatin5026 Před rokem

      Abi bana yardımcı olurmusun

  • @debag300
    @debag300 Před 5 lety

    Де би лойд!!

  • @dobidobitv3737
    @dobidobitv3737 Před 6 lety

    Servis 550 TL istedi yapılsın dedim bakalım ne olacak

    • @moza19802000
      @moza19802000 Před 5 lety

      anakart değişti 6 ay sonra yine aynı.oç bunlar bozuk malı kakalıyolar

    • @suleymanylmaz1413
      @suleymanylmaz1413 Před 4 lety

      Neoldu sonra duzeldimi tv bendede aynı sorun var.

    • @moza19802000
      @moza19802000 Před 4 lety

      @@suleymanylmaz1413 ayda bir yazılım atıyorum android recovery ekranından.yakında çöpe atıcam.2 gün tvyi açmazsan sapıtıyor

    • @suleymanylmaz1413
      @suleymanylmaz1413 Před 4 lety

      Bende anakart yanmış dediler yapılsa 750 tl yeni kart takılırsa fiyatı 1750tl dediler

    • @moza19802000
      @moza19802000 Před 4 lety

      @@suleymanylmaz1413 yazık günah yazılım donanımı bozuyor yine aynı olacak.panelini sat kaç para veriyorsa servis git yeni tv al 2 bin liraya sıfır tvler var.ben bozulunca bi daha phlips almam ucuz bişey alırım

  • @theoriise1543
    @theoriise1543 Před 6 lety +1

    I have the exact same issue now! Did you find a solution? thanks!

    • @freddyen
      @freddyen Před 6 lety +2

      Yes!
      When you remove the backside of the TV, you will find a PCB/board with the powersupply and a PCB with the CPU.remember to remove the interface cable for the ambilight, you gain access to it by removing the shield around the joystik at the down right corner of the backside of the screen
      remove the board with the CPU, remember to remove interface cables so you can turn the board around and look at the backside.
      When you look at the backside, you will find 3 massive thermalpads.
      Thermalpads are made by silicone, among others, those pads, might be "sweathing", during long periods of heeattransfer, so take a piece of toiletpaper, and gently remove the sweath from the pad and the board.
      Dry the board with a hairdryer after you remove the moist on it and assemble the tv and remember the ambilight :)
      Let me know how it works.

    • @arashesso3007
      @arashesso3007 Před 3 lety

      @@freddyen i tried and it finally worked after almost a week.
      Thanks ALOT!

    • @freddyen
      @freddyen Před 3 lety

      Np! :)
      My own screen died though, it worked for allmost a year but finally went coocoo, so i purchased another.
      Still an easy way of using the screen while saving up to another.

    • @3mar_xg255
      @3mar_xg255 Před 3 lety

      @@freddyen Hi, i have the same problem and i want to try your solution. Do you have a video for that so its easier for me to do it. Thx :)

    • @freddyen
      @freddyen Před 3 lety

      @@3mar_xg255 unfortunatly no, but tale a a look at the backside of the tv, it's pretty easy😊

  • @ledtvrepairwarsha2323
    @ledtvrepairwarsha2323 Před 4 lety

    Hi

  • @dancr4833
    @dancr4833 Před 8 lety +1

    el peor televisor que me he comprado

  • @NetPatriot
    @NetPatriot Před 9 lety

    trying to root the android?

  • @CityBorispol
    @CityBorispol Před 9 lety

    Не стоит брать, что в итоге?

    • @dmitrij8706
      @dmitrij8706  Před 9 lety

      Не ремонто пригоден, замена на новый по гарантии.
      3-й месяц полет нормальный, а картинка все-таки потрясающая у него.

    • @CityBorispol
      @CityBorispol Před 9 lety

      Дмитрий Гальцев есть ли зависания, глюки?
      как ведет себя в 4к, 3Д
      в играх и фильмах есть ли задержки?
      спасибо

    • @dmitrij8706
      @dmitrij8706  Před 9 lety

      CityBorispol
      Зависания бывают, глюки тоже, все же Андроид старый со всеми вытекающими.
      Для 3д не лучший вариант, глубина небольшая и задние планы двоятся. В сравнении с Самсунгом на кухне, который дешевле в 2 раза и с активным 3д. Там картинка действительно объёмная, с хорошей глубиной и большими углами просмотра.
      Более подробно о недостатках ниже в комментах.

    • @CityBorispol
      @CityBorispol Před 9 lety

      Взял LG 730. О чем ни разу не пожалел

  • @dumitruvrabie7261
    @dumitruvrabie7261 Před 9 lety

    nashol problemu ?

    • @dmitrij8706
      @dmitrij8706  Před 9 lety

      Нет, не нашел. Сдал в гарантийный ремонт, по результатам отпишусь (по истечении 45 дней согласно законодательству).

    • @SAGeNeMoguNET
      @SAGeNeMoguNET Před 6 lety

      Дмитрий Гальцев 2 года прошло и какая проблема была, мать?

  • @gerritbulsing7851
    @gerritbulsing7851 Před rokem

    Reboot system now

  • @giusraf
    @giusraf Před 9 lety

    you are able to solve the problem? Regards

    • @dmitrij8706
      @dmitrij8706  Před 9 lety

      Not resolved. I handed him to warranty repair.

  • @alparslancan3073
    @alparslancan3073 Před 4 lety

    cpu problem

    • @OGERTY
      @OGERTY Před 4 lety

      Yanıtınıza denk geldim. Benim 8109 philips tv de durum aynen bu şuanda.Bir çözümü var mı kendim yapabileceğim bildiğiniz?

    • @PlaylaptopNet
      @PlaylaptopNet Před 4 lety

      @@OGERTY malesef cpu arızası

  • @freddyen
    @freddyen Před 6 lety +2

    When you remove the backside of the TV, you will find a PCB/board with the powersupply and a PCB with the CPU.remember to remove the interface cable for the ambilight, you gain access to it by removing the shield around the joystik at the down right corner of the backside of the screen
    remove the board with the CPU, remember to remove interface cables so you can turn the board around and look at the backside.
    When you look at the backside, you will find 3 massive thermalpads.
    Thermalpads are made by silicone, among others, those pads, might be "sweathing", during long periods of heeattransfer, so take a piece of toiletpaper, and gently remove the sweath from the pad and the board.
    Dry the board with a hairdryer after you remove the moist on it and assemble the tv. dont forget the ambilight :)
    Let me know how it works.

    • @hidrojen091
      @hidrojen091 Před 6 lety

      I did the same as you did, but no improvement.

    • @freddyen
      @freddyen Před 6 lety +1

      @@hidrojen091 did u dry the PCB om all 3 pads agter removig the moist? And resetted the software?

    • @harrisonbristowe5293
      @harrisonbristowe5293 Před 6 lety

      Hey Freddy,
      I'm having the same issue with my TV. Would you be able to make a tutorial on the above? or take payment for walking this through step by step on a video call?
      Many thanks - Harrison

    • @freddyen
      @freddyen Před 6 lety

      To make a tutorial would require, taking apart my tv once more, risking to drop it or something else, its kinda heavy as you might know :)
      But sure, i can try walk you through it.
      what kinda messenger do you have?

    • @freddyen
      @freddyen Před 6 lety

      we can use messenger, how do i find you?

  • @kosh_marius
    @kosh_marius Před 9 lety

    Ну что? Говно Ваш Филипс с андройдом, а ты его нахваливал - эх. Как там по англицки? )))) А по факту - сочувствую(((

    • @dmitrij8706
      @dmitrij8706  Před 9 lety

      Как не печально, но Philips продал свое направление по телекам китайской TPV в 2013 году. Аудио и видео - японскому Фунай. Т.е. у Philips только медицинское оборудование и свет.
      У вышеобозначенных полные права от разработки до производства, шильдик Philips по франшизе.
      Хотя телек не плох, функционал Андроида и шикарная палитра Philips как и раньше. Но профанаций и развода маркетологов тоже немало, в том числе 4к и функционал Андроида именно для этого девайса.

    • @kosh_marius
      @kosh_marius Před 9 lety

      От сюда вывод - Телики Филипс больше не покупать!

    • @dmitrij8706
      @dmitrij8706  Před 9 lety

      koshff2 но, не могу сказать, что картинка гавно. Она все так же превосходна, все те же естественные цвета, эмбилайт и отсутствие засветки.
      На мой взгляд надо подождать пару лет, 2-3 поколения и они догонят конкурентов по функциональности и юзабилити ПО.

    • @kosh_marius
      @kosh_marius Před 9 lety

      Дмитрий Гальцев
      ты считаешь, что есть не глючащие телевизоры?

    • @dmitrij8706
      @dmitrij8706  Před 9 lety

      koshff2 возможно Панас, Сони. Сони по дизайну не плохи и ближе всего к Филлам.

  • @ShelyapinPavel
    @ShelyapinPavel Před 8 lety

    трусы отличные

  • @alexisrios2683
    @alexisrios2683 Před rokem

    Crappy brand and equipment