I found tech support to be very helpful and willing to answer any and all questions I had. They even offered advise on stuff that I didn't even think of asking about. Now that's support !
Hope I got mine immediately, order from Amazon but need to ship to my country. Is that anywhere I can buy from Hong Kong? Not very good to get it in Hong Kong.
I have a milling machine I putting in storage for a while I would like to protect the machined surfaces from rust would this product work in this type of app.? what about when it is put back in service do I need to remove it ? would that be difficult Or do you have another product that would work better ? I have been using CRC products for years Great products Thanks
Perhaps the best way to clean is a good old fashion hair dryer and a clean (very dry towel) no really hard and the hair dryer compared to a heat gun can not start to burn any wire insulation... good luck sir...
This corrosion inhibitor is not a lubricant. You may want to try CRC 6-56 Multi Purpose Lubricant. www.crcindustries.com/products/6-56-174-multi-purpose-lubricant-11-wt-oz.html
@@Ronbo765 We would not recommend using these products together, because the 6-56 will dissolve the heavy duty corrosion inhibitor and not allow it to dry or cure properly. Please contact our Technical Services who can provided better assistance - techservice @ crcind.com
I found tech support to be very helpful and willing to answer any and all questions I had.
They even offered advise on stuff that I didn't even think of asking about.
Now that's support !
Well I don't have a boat, but I'm getting that stuff for my car. Better late than never
Can it be applied on a truck frame over a little rust
Best to get the rust off first then use it, I have my whole undercarriage on my truck spray with it. Best I've used.
I did and worked well for me.
@@darktoadone5068does it dry clear or as a film, wanted to use this on polished aluminum/ chrome
Hope I got mine immediately, order from Amazon but need to ship to my country. Is that anywhere I can buy from Hong Kong? Not very good to get it in Hong Kong.
I have a milling machine I putting in storage for a while I would like to protect the machined surfaces from rust would this product work in this type of app.? what about when it is put back in service do I need to remove it ? would that be difficult Or do you have another product that would work better ? I have been using CRC products for years Great products Thanks
What is the difference between this and SP-400?
Can we have an answer to this question, please?
On my truck frame I want to make it look nice after treating it with CRC, could I paint over the CRC to seal it in?
Did u end up using it? Is the film clear?
is it a clean finish? or is it a waxy? white? or clear residue?
Is this good for fishfinder pin connectors?
DO you carry any product for bait-caster reels that are not saltwater friendly?
Can this be applied directly to an already rusted surface???
We recommend removing the rust before applying CRC Heavy Duty Corrosion Inhibitor.
How can I remove this residue. I got some nasty over-spray I need to clean off.
Perhaps the best way to clean is a good old fashion hair dryer and a clean (very dry towel) no really hard and the hair dryer compared to a heat gun can not start to burn any wire insulation... good luck sir...
Brake cleaner or another solvent will do the job. Just be careful not to hit the area you want to be covered
for how long the CRC corrosion inhibitor protect the metal when applied to the metal?
up to one year
Will also act as a lubricant ?
This corrosion inhibitor is not a lubricant. You may want to try CRC 6-56 Multi Purpose Lubricant. www.crcindustries.com/products/6-56-174-multi-purpose-lubricant-11-wt-oz.html
@@CRCAutoUS Can it be used in combination with said lubricant ?
@@Ronbo765 I will get back with more info tomorrow.
@@Ronbo765 We would not recommend using these products together, because the 6-56 will dissolve the heavy duty corrosion inhibitor and not allow it to dry or cure properly.
Please contact our Technical Services who can provided better assistance - techservice @ crcind.com