I have had issues with my back brakes dragging thanks to the stupid parking brake design and I wonder if this design takes its toll on the reverse gears. Also the van is so heavy, even low tire pressure can damage it! It's good to see that Rock Auto sells the updated compounder drum which should help prevent the reverse issue in the future. My van just hit 140,000 miles and fixing the transmission should make it last even longer! Lots of good tips for do it yourself save yourself money people like me 🙂 Thanks for the video!
Update! I changed the trans fluid and filter and saw no metal in the pan. But when I took off the filter I had chunks of the lower drum in the filter! I went ahead and finished the job and the van shifted and worked like it did before. Reverse still stutters but is no longer stops working once the trans is hot. Looks like I will be doing the repair that you did in this video as I have an emissions test to get done and this stupid P code will cause it to fail 😞 Thanks again for this very informative video!
Excellent video, thanks for sharing... I have a 62 te, I changed the torque converter and oil pump and now it only moves in reverse when putting drive, it jerks and doesn't move and I have the codes p0871 and p0585, what could it be? thank you so much
Not long at all. Maybe a few hours (2 to 3 hours). It’s very easy, you just unbolt the cover on the driver’s side of transmission and everything opens up from there.
Cool, bro, I'm learning still, but working on transmission is difficult, some one is selling a 2012 caravan for 1000, and It doesn't reverse, and I want to buy it to fix it
rock auto the best...always ordering parts from there
did you reuse the clutches?
Man you're braver than I am I would never mess with the transmission never game over
I have had issues with my back brakes dragging thanks to the stupid parking brake design and I wonder if this design takes its toll on the reverse gears. Also the van is so heavy, even low tire pressure can damage it! It's good to see that Rock Auto sells the updated compounder drum which should help prevent the reverse issue in the future. My van just hit 140,000 miles and fixing the transmission should make it last even longer! Lots of good tips for do it yourself save yourself money people like me 🙂 Thanks for the video!
Update! I changed the trans fluid and filter and saw no metal in the pan. But when I took off the filter I had chunks of the lower drum in the filter! I went ahead and finished the job and the van shifted and worked like it did before. Reverse still stutters but is no longer stops working once the trans is hot. Looks like I will be doing the repair that you did in this video as I have an emissions test to get done and this stupid P code will cause it to fail 😞 Thanks again for this very informative video!
Mine started shifting hard only in reverse. Its like a bang otherwise everything works good. 180k running good.
Excellent video, thanks for sharing... I have a 62 te, I changed the torque converter and oil pump and now it only moves in reverse when putting drive, it jerks and doesn't move and I have the codes p0871 and p0585, what could it be? thank you so much
You should have shown your test drive in the video also
Runs like new. It ran awesome the day I pulled out of the garage and still running strong.
How long did it take u to remove the compounder from transmission
Not long at all. Maybe a few hours (2 to 3 hours). It’s very easy, you just unbolt the cover on the driver’s side of transmission and everything opens up from there.
Thanks
My question is do you have to pull the valve body to be able to pull the reverse drum
You have to get the fluid lines out of the lower drum to be able to take it out
I appreciate your response. Your video helped me out greatly. Thanks again
Did you do this yourself?
Yes. From start to finish I would say it took around 7 to 8 hours.
The van is still running strong, driving it everyday.👍
Cool, bro, I'm learning still, but working on transmission is difficult, some one is selling a 2012 caravan for 1000, and It doesn't reverse, and I want to buy it to fix it
What did u use the press drill for?
To hold the inside casing down the better set the inside retainer clip