Nice video👍 do you have any tips for edging tight curves? I always have trouble getting a clean smooth finish as edger digs in on such a step angle to get around the corner. Are there shorter edges for this?
If you want to build a strong grip - I hang off a chin up bar for a couple of minutes, and then move up to hanging one arm at a time - 5 minutes of sets a day will build an iron grip.
I guess there's no need for expansion joints in a climate with no freezes? You would never see a concrete driveway looking like this in most of the US.
Great work as always but this looks like a side job. You work weekends? Take a day off Mate. I would like to try out a pointed trowel though. How about the 192A. Thanks, Dennis
Lee Pino i’ve never use them on concrete and probably why no one uses them is because they would wear out very quick . And it will cost you a lot of money to buy tools all the time 🤔👍
Concrete ninja I’ve been doin concrete here in the states for about 8 years for a small company. Fiberglass is all my boss likes to use and they hold up purty well. They actually work real good especially when it’s stiff. I’ve had one of mine for the past 3 years and it’s holdin up good. I never see anyone online using them and started to wonder why or if there was a reason for that
Great tips Ninja, thanks again.
Spinafication 👊
A few more of these up close videos and concreters will have no work. The secrets are out! Thanks for posting, very therapeutic to watch.
Good vid mate, for the work we do the 109 is our preferred trowel. Can’t beat master finish gear.
I've never seen a trowel shaped like those makes sense all of them look nice
As always awesome work ninja and again thanks for working and not getting paid!👏💪👊
Bearded Bricky thanks mate 👍
Nice keep up the good work concrete ninja 💪💪💪💪💪👍
Sean Ward thanks buddy 👊 lots more videos coming this week and some more giveaways 👌👊
Thanks from the states mate
I love your laugh concrete ninja
matthew casey thanks buddy 😂😂😉👍
Whether it makes you some more money or not making this video is appreciated, thanks
Nice video👍 do you have any tips for edging tight curves? I always have trouble getting a clean smooth finish as edger digs in on such a step angle to get around the corner. Are there shorter edges for this?
master finish getting on board the ninja train
cammy470 👌👊
cammy470 It’s awesome to see a company like them help someone like me 🙏😇
Good times ninja 16" bro👍😎👊
I like jim shus
👍
G'Day Ninja! 'Round these parts I run a 20 incha for most jobs..(what's that, a 508?) Thanks for all the content from ConcreteExpressionsPEI !!!!
shabugala 👍👊
If you want to build a strong grip - I hang off a chin up bar for a couple of minutes, and then move up to hanging one arm at a time - 5 minutes of sets a day will build an iron grip.
Nice vid mate. I am missing a 193 from my set ;)
Ben Burgs thanks Ben I’ll see what I got 😉
I guess there's no need for expansion joints in a climate with no freezes? You would never see a concrete driveway looking like this in most of the US.
Looks good
Just a tip I would be using sticky back between the 2 slabs also helps for expansion 🤙🏼
i realize I am kind of randomly asking but does anyone know of a good place to stream newly released movies online ?
@Fisher Lee Flixportal :P
@Alec Kendall thanks, I signed up and it seems like they got a lot of movies there :) I really appreciate it !!
@Fisher Lee glad I could help :)
PLEASE HELP! Why does every time I edge , it feels rocky and never smooth? I’m almost hitting rocks and doesn’t feel creamy .
Great work as always but this looks like a side job. You work weekends? Take a day off Mate.
I would like to try out a pointed trowel though. How about the 192A. Thanks, Dennis
Dennis Hill thanks buddy I’ll try but life is too short to sit around I love it 👊
Wish you were here in the states. 2 years doing concrete and these old fellas do it the hardest way possible 🤬. Love the vids
Adam Read thanks mate should get them to watch the video somehow without pissing them off 😂😉👍
The 109 trowel is the good one especially when the Crete going off and why do you Queenslander's west thongs when finishing concrete
Umberto Galasso Because it is very hot in Bundaberg Queensland . Only can wear them when you are finishing concrete 👍
Also doesn’t leave big foot prints in the slab when your running the chopper around on it
Chopper = Trowel Machine
Regards Mexico
andrres qtpie 👋🙏
Shyte.... jibber jabber
Do you guys ever use fiberglass floats, and if so, can u explain why I never see anyone using them
Lee Pino i’ve never use them on concrete and probably why no one uses them is because they would wear out very quick . And it will cost you a lot of money to buy tools all the time 🤔👍
Concrete ninja I’ve been doin concrete here in the states for about 8 years for a small company. Fiberglass is all my boss likes to use and they hold up purty well. They actually work real good especially when it’s stiff. I’ve had one of mine for the past 3 years and it’s holdin up good. I never see anyone online using them and started to wonder why or if there was a reason for that
Thanks again for the reply
What brand are they? Ive been looking for fiberglass floats but all I find is resin floats
? Simon walked in on Ninja edging his girl 😲😚😝😝 😂😂😂🤣🤣😂... 👊🏻✊🏻✊🏻🤜🏻🤛🏻 Ninja lifes matters!
nonya buisness 😂😂😉
Lol who concretes in chanclas
Looks like non of you guys have had concrete poisoning yet wearing shorts and sandals
This video could be 4 min long.
Why would you let it get that hard. Should have been broomed an hour ago.
Ed Kreuz we like to work the concrete as it’s going hard to make it stop cracking as much . 👍
Imagine working in flip flops wtf
Bit too edgy for me...
A jones 👍
Can’t take advice from someone in flip flops