DIY FORCE FEEDBACK GAMING STEERING WHEEL with QUICK RELEASE
Vložit
- čas přidán 9. 06. 2023
- You can get the 3D print files from here : cults3d.com/:1589654
Contact me at : nazranigaming@gmail.com
*Hardware used:
-Board : STM32F401CCU6
-600 PPR Rotary Encoder
-Power supply : 12v 20A smps or Car battery
-RS775 12v DC motor
-BTS7960 motor driver
-DB9 plug
-Microlever switches
-12 mm steel rod
-M3 nut and bolt
-12mm pillow case bearing
-8mm magnets
-100 tooth large pulley
-20 tooth small pulley
-280mm GT2 Belt
-12v 3 inch DC Fan
-different types of Switches
-3mm TIG welding rod
-plywood
-3D printed parts
*Software :
EMC Facebook Page : / emcdeveloper
Sim hub for gear indicator
-Solidworks for 3D designing
Simple FFB wheel • DIY FORCE FEEDBACK GAM...
Sim dash • DIY SIM HUB DASH - GEA...
Button box • DIY BUTTON BOX for PC... - Věda a technologie
Awesome build, I have seen similar using laser cut and machined parts, this is the real DIY deal. Very well done!!!
Thank you very much!
A DIY sequential shifter would be great to see. You are awesome.
Thank you, I'll try to make one
@@AllenResalamsir plz is there any possible way to contact you
Love the Slip Ring! Good job!!
Thank you!
youre the best one here , i loved the slip ring mechanism
Thankyou!
Nice Work ive come across an issue that the ffb gets randomly lost when i use it did you experience this aswell ?
Bro my only question is how that slip ring mechanism work i mean dont you need wires for paddle shifters??
Bro can we use 6v dc motor for ffb
I love it
Video maravilhoso 👏🏼 parabéns grande projeto!
obrigado :)
Hey Allen, is it possible to use the same STM board but in a combination with a VESC controller to drive BLDC motors?
you need to ask that to the EMC developer on Facebook facebook.com/EMCDeveloper/
Bro ware i get programming from stm32 ?
Hey! man really impressed by your work. I have a question that stm32 board require stlink to load firmware. So in this board you using , you also used st link orr just plug into your computer and load it??
You don't need stlink for this specific board, just plug with usb c type and upload firmware
Can you tell me what is the rated output torque of your build and also mention the rpm .
Also I am very confused about what is the desired rpm for drifting. Is 400 rpm is enough for ffb wheel.
i didnt calculate the torque but i can say its good enough (2 motors pulls 15 amp at 12v),
also rpm doesnt matter .
Thanks for that. Also can you provide me a link to the wiring diagrams of stm32f401.
Good JOB! Good music~
There is no shadow in BEAMNG?
Thankyou! beamng got a lot of bugs, sometimes shadows or texture wont work
Is the Force Feedback is hard enough? For drifting use and also, how does it cost for 1 setup? Base, Pedals & Shifter if u can do it.
yes it got enough Force for drifting and whole setup costs less than 200 $ in parts
bro where did you by the STM32F401CCU6 from?
robu.in/product/stm32f401ccu6-minimum-system-board-microcomputer-stm32-arm-core-board/
How much torque u get ?
Hi, great project, but how did you drill the holes through the 12mm solid rod?
using a regular drill with 3mm steel bit
Hello, I would like to know what is the funcionality for the slip ring mechanish
for unlimited rotation, otherwise the paddle shifter wire will tangle
Connection with stm32 link plzz
How much torque?
So, coming from a G29, I am tempted to start building one of these... which of your desings would be better than the g29 in your experience? I'd rather do the simple one you posted before... Thanks!
I highly recommend you to try this model as it's more powerful and durable compared to my previous models
@@AllenResalam Thanks! And sorry if someone already asked, but how long did it take you to assemble? (I will multiplty that by 10 probably)
It took me about 3 months to plan and 2 weeks to build including filming
a question, is this new card ( STM32F401CCU6 ) better than leonardo?
Far better
Will the slip ring machaism work with USB Jystick Encoder? Just want to know.
Im not sure
Do you think it's better than a Logitech?
Hi, why did you change the threaded rod that you used in previous build?
it was wobbly and not durable at all compared to a 12mm solid steel shaft , also a perfect fit for the pillow case bearing
The spline setup is much better! More on par with the spline in a real transmission, at least for strength
@@AllenResalam I followed the steps in your first video and used an 8 mm threaded rod. Do you think that if I change to an 8 mm steel rod it will be more stable? I don't want to change all the bearings :c
Men its that possible to make it without 3d printed parts? I dont have 3 printer and if a gonna rent one in cost more than a logitech string wheel
you can try online 3d print services or you have to use your imagination to find alternative parts
@@AllenResalam ok thanks
Hey brother, how much power do you use for 2 motors?
Max 15 Amp at 12v
Can this work with the arduino nano instead of the stm32 board?.... great work!
No
@@AllenResalam ok thanks
could you leave the link where you bought it. very good your video
robu.in/product/stm32f401ccu6-minimum-system-board-microcomputer-stm32-arm-core-board/?gclid=Cj0KCQjw2eilBhCCARIsAG0Pf8va5IKXYv1h58teoLh00mp8lQdoMCyOJMYPFU1CbpgY7CGXkoHXpbEaAhHrEALw_wcB
Can u give complete cirut diagram
Which is better for you, old or new? you are the best in this field 😊🤯
why do you have two motors in this model?!
Definitely new model for me, its much harder to build , that's why i made the old one so that people with limited tools can make it .
@@AllenResalam thanks bro 😀
EMC pro Ebolzmagy 👍🏽
Great job! What are the resistances you use?
4.7k for encoder and 10K for pedals
@@AllenResalam thank you so much! Keep sharing your awesome work!
+ 1 subscriber
Thankyou and good luck with your work!
Is the firemware same with your old project?
No it's Emc pro firmware
🔥🔥🔥🔥🔥🔥❤️❤️❤️❤️
i was also trying to make this project but suffered a problem where i live stm boards i cant find an where so is there any alternitives for that edit: i found one but can i use it STM32F103C8T6 also is the encoder incremental or absolute PLEASE ANY BODY REPLY
yes you can use STM32F103C8T6 and the encoder is 600 PPR 2-Phase Incremental Optical Rotary Encoder
❤❤❤
power supply rating ???
I need some help sir..im getting problem with the forcefeedback motor.
What is your issue
how well would it work with 60 teeth pulleys instead of 100?
less torque and more current draw
@@AllenResalam oh but I can't find any 100 teeth pulleys on Amazon does the old design also use 100 teeth pulleys?
bro, is rs775 strong enough for feedback steering?
yes
@@AllenResalam but anothers said that motor scooter is better. bro
you can use any motor according to your need
Bro can we use STM32F103C8T6 board instead of using STM32F401CCU6 board because i already have STM32F103C8T6 board inhand.
yes but its older and uses old version of EMC
@@AllenResalam thanks bro also can we use potentiometer with gear instead of rotary encoder cause its expensive
No potentiometer wont work
@@AllenResalam Bro also can you make a video of programming the board.Thank you
Hi
I have question
Is this wheel 900 degrees?
And can i connect a H shifter to it?
It's range is from 5 to 2000 degrees
Yes you can connect an H shifter, I'm working on it
@@AllenResalam Thankful . Can I set it to 900 degrees myself?
@@AllenResalam good work
Yes you can set to any degree in software
If you want to sell this, How much would you sell for it?
Bro share the circuit diagram pls
Bro can you make the steering for me like this under 500 rs
for a DIY build I would much rather use this than a Thrustmaster t300 servo base as it has dual motors for one and honestly the build quality of the 300 isnt much better than this DIY version lol
Bro how to programming the border video please 😢
what does the build guide include?
solidworks and STL files , wiring diagram , pics , EMC lite and wheel config program etc
can i use 400 ppr encoder btw nice work
-new subscriber
Yes you can
@@AllenResalam is aurduino needed for only the steering
pleas share software files for stm32
Why did you use that rotary encoder
One more doubt , i.e.
Is this the direct drive strings wheel or it is like Logitech one
How will we get vibrations of forse feedback
Because I didn't see any other dedicqted motor for vibrations?
it is the best quality and accurate encoder for the price. this is like Thrustmaster T300 but dual motor and those motors do all the FBB work
Can u sell this
Can play Forza horizon 5 using this wheel
Can you give 3d printing file download plz
Any issues with overheating?
with 2 fans, no overheating at all
Thanks@@AllenResalam
@@BRS-16 Worked or not? still overheating? got a rs550 with the overheating issue when i use 12V, with 24V works weak
how much was the total cost of the whole project, and how much would it cost if I don't wat it to be quick release and will it work with forza horizon
1.about 100 USD without 3d printed parts
2. yes it will work with forza , use forzaEmu
Bro can i order it please iam love with it i will pay how much u want ❤❤ Great work
Are u malayali😅
Also new subscriber ❤❤🎉🎉🎉
yes bro im malayali but sorry i dont have time to build and sell them atm
Can you please provide the wiring of stm32 please 😢🙏
Do you have emc pro its Inside the folder when you buy it
@@bossoy0769 I can't buy it because I don't have paypal,
Can I buy it from you?
I mean I will pay you 10dollars
Then you buy the files and I will install it so it will be licensed on my processor
U prob have paypal coz you already purchased it from them
So, can you do this so?
Bro ithu need for Speed most wanted il work cheyyo
Yes but no ffb
hey can you share EMC utility pro software 🥺
it got a license file made with GUID of your pc so you have to buy it from developer
@@AllenResalam ohh.. okay okay.thanks
Bro where to download the circuit diagram
I am willing to buy the files
Everything is within the files
@@AllenResalam bro which files 🤔
Which I contacted emc development the are not telling whether I will get the circuit diagram
Yes the circuit diagram is available with both mine and emc files
I need your files where can I buy them
Steering wheel photos PDF 🙏🙏🙏
hello sir, i want to buy your design, but i don't have paypal, how can i get it?

which country are you from?
I'm from Indonesia
Okay you can give me a steam gift card instead
how to do it?
there are many videos about it on youtube
bro do you have free emc lite?
yes inside FFB files drive.google.com/drive/folders/130OB-KdsTCtjxZrEUzBqd6_-f2wu6uZ-
@@AllenResalamdo we need to pay something to access these files?
Probably more stable than fanetec qr1😂😂😂
Hey Allen, can you share your email? I dont have Paypal, but I'd like to buy these files from you
sure, contact me at
nazranigaming@gmail.com
@@AllenResalam Hey Allen, I have emailed you. Also sent you a request on Discord.
how much it cost ?
about 100 $ in parts except 3d printed parts
@@AllenResalam ok bro 🥰
Has anyone bought this project?
Brother wiring diagram
Check description
@@AllenResalam5$ 😅
I am making this steering wheel at home from scrap and some new part and can't even afford Arduino Leonardo till now, and for this wire diagram 5$, sorry brother
Can i order this
Iam from kerala i got ur slang❤😂
sorry bro , atm i only sell the files, don't have time to build the whole thing.
(malayali pwoli alle 😄)
the idea is nice, but ugly AF. just a thin wet sandpaper and then spray paint:( instead of that wood why not print the wheel too? or use another wich can be sand down and spray painted. i think the case is too much thick. well finally works fine and that's the important part.