Turbo Powered Stump Incinerator
Vložit
- čas přidán 10. 09. 2024
- Many of our videos are comedic & satirical & not intended to cultivate antisocial or unlawful behavior. Thank you for supporting our Channel through the below affiliate links. No price increase for you but we may receive compensation.
-Amazon - our store - wranglermart.com
-Jk Boots - www.jkboots.co...
-Radios Made Easy - radiomadeeasy....
-Amsoil - www.amsoil.com...
-GoDark Bags - godarkbags.com...
-Premier Body Armor - www.premierbodyarmor.com/wranglerstar
-Vertx - shareasale.com...
-My Patriot Supply - www.preparewithwranglerstar.com
-Eden Grow Systems - edengrowsystem...
Become A Wranglerstar Member For Exclusive Content and Perks
/ @wranglerstar
SUBSCRIBE: bit.ly/2btWfQR and turn on notifications to get them
#Proho #wranglerstar
the true champion here is the guy who cut that massive stump so flush to the ground.....
They will have used a stump grinder.
No! The Chainsaw Is The Champ! Free Stump Grinding Advise! Drill The Holes and Put Used Motor Oil in the Holes and In 9 Years The Tree Never Happened! The Money People Make Off a Tree? Time Kills Everything.
How do you know it was a guy?
I'll send my sister. I don't want to say she's a bad cook, but I swear she could set fire to a brick.
Hahaha
😂
Almost spit my coffee out 🤣🇺🇸
😂
That's what you get for sending a fireman to do an arsonists job.
Gotta know how a fire is started to put a fire out.
@@pootmahgoots8482 um no you don't lol
@@Camwize in certain cases you do. But this does not apply to wildfires. Doesn't matter how they start, by the time they are contained the ignition source has more than likely gone out. But for a grease fire in your kitchen, yeah you are not gonna want to throw water on that to extinguish it.
Knowing what is burning ≠ knowing how to start a fire or how the fire had it's inception.
A few sticks of dynamite maybe?
“Don’t try this at home. I’m a professional, but I’m not sure what’s gonna happen here.” Lol
One hour later...
“Man, this is Lame.”
Crack me up
Pretty standard for this guy
@@mrdavidurquhart With a 25% gas mix I thought we might see his interpretation of the human torch. Luckily there weren't any flames just buried coals or we might have seen some excitement. This is supposed to be a trained firefighter? It's like the one where he says I don't weld much and haven't welded any in a long time so I'm gonna review this welder. I watch one of these now and then but not with the expectation that I'll learn anything useful.
@@andystennett3458 very good my friend I feel the same way😂😂😂😂😂
I dont mean to be off topic but does any of you know a trick to log back into an instagram account?
I was dumb forgot the login password. I appreciate any help you can offer me
@Zaid Lionel Instablaster :)
Drill bigger holes. Soak in Kerosene or diesel 2x day for 3 days. Light flares, put in hole FIRE SIDE DOWN. Walk away. No need for blowers and barrels. Stump gone. You're welcome.
He'd rather turn it into a NASA project.
thanks , I was wondering how and you made it sound so much quicker . Soaking makes sense , and fire side down too
That's a job for black powder. Or thermite
Or thermite an magnesium
Keep pouring diesel on it until you put it out
I thought the road flares were dynamite when I saw started watching. Like "That's one way to do it."
I did too lol
That's the Michael Bay method of stump removal. 🧨💥💥💥
That’s the best way to do it
I'd say a larger auger, deeper holes and dynamite would be the way to do it.
Next time he's going to try burning out the stump by putting 3 more stumps on top of it, soaking them in moonshine and diesel, and covering the whole thing with some cat litter and old tires.
Best comment
You could always try drilling several holes and fill them with TH3 Thermate. It's easy to make, legal as long as you dont store it and burns incredibly hot. It is an exothermic reaction that has it's own oxygen feed from the iron oxide.
Side note, your blower idea was on the right track, but your other vent holes ruined it.
Thermite's a mix of aluminum and iron oxide.
@Rahere I'm aware, thanks. I didn't say Thermite, though, did I?
@@DumTheGreatish Yeah Thermate ads sulfur and burns hotter.
@supertornadogun9547 more barium nitrate than sulfur, the sulfur just keeps it more consistently burning. Most of the extra heat comes from the barium nitrate.
Drill a bunch of holes. Soak it with diesel. Then build a fire on top of it. Keep it going. Works every time
That's what I do. Soak for a few days. Good time to get rid of used motor oil at this point too
Changing the oil in my trucks this weekend and burning out stumps in my fence line.
My suggestion is much the same except instead of diesel, you use black powder!
I should have read comments first. I just suggested the same. it worked for me also.
Drill a bunch of holes, fill them with thermite. Might give off more heat than a flare. That'd get the coal started too. The problem with diesel in this scenario is that it'll take the oxygen so it won't get the wood started.
Oh my God, this one brings back memories.
As a kid on my Grandpas farm, my Dad told me to get that stump off the middle of a large field.
I was at it for 4 days.
Nothing but surface fire and little else.
My Grandpa told me that he told my Dad to rip out that stump out 20 years ago....
My Dad was just driving me crazy because he couldn't do it.
Modern time calls for modern technology.
I browed a back hoe and large hydraulic jacks.
I got that stump out in a afternoon.
I piled up the pieces of the stump next to my Dads car.
It was actually fun.
I tried burning a stump and some big bear wearing a hat, snuck up and hit me upside the head with a shovel.
same thing happened to me. Then while i was half conscious he said something about preventing wild tires..??? I asked him how tires would even be wild if they're bolted to a car but i can't remember his response. idk probably irrelevant now
That is funny
Omg, that's killing me, laughing my bear behind off.
MegaTapdog you should be afraid 😈
Lmao forgot about smokey since elementary 20 yrs ago
When we were kids in Kentucky my grandpa told me to get rid of the old stump in the middle of a new paddock where we were about to move the jackass. We tried everything. Every time we went into the house for some lemonade the old fart would just laugh out loud, call us dummies, and spit his chew into a nasty old spittoon with splatters everywhere. Finally, when everybody went to bed, my brother and I snuck out and went into the shed where the old coot kept his dynamite. We had never used dynamite before, but we had seen him use it to blow up a big old bluerock section of the farm, so we figured if he could do it so could we. During the day we had used a hand drill to drill holes in the top like this guy did and tried diesel, and it failed, but the holes were still there. So we stuck the dynamite in the holes, pulled the wicks about ten yards, lit them, ran like hell, and hid behind the shed where we could see the stump and the backdoor. Three sticks of dynamite were way too much and when it went off I lost my hearing for about two minutes. All I could hear was buzzing when my brother starting laughing and pointing at the backdoor. The back of the house had caught fire and the old man was naked as a jaybird, dong flapping as he ran from the well to the house with bucket after bucket to douse the fire. Was funny as hell until we got a dirty lickin up one side and down the other that hurt for days. But dammit, that stump was nowhere to be found. We had a hole the size of a Buick where the old stump had once mocked us. I still, to this day, think that was the highlight of my childhood. If only I had a little Kodak in my pocket to shoot the old man, long white whiskers flapping in the wind as he ran, dong dancing up and down and his eyes as wide as headlights. Good times.
I was in tears, absolutly dying. awesome story. please share this everywhere. 👍👍👍👍👍👍👊👊👊👊👊👊🤣🤣🤣🤣🤣🤣🤣🤣
What is it about men and fire that just makes us revert to being 10.
When we no longer live with our parents, our experimental dreams must be realized.
Animal instinct in us maybe? That protective, masculine whatever.
Mathew I thought the same thing when Cody said “man, this is lame.” Lol
@@TotalyRandomUsername Fire is like a child. You create it, and its a thing of beauty. But unlike children, fire doesnt talk back, throw tantrums, and matures very quickly, and then dies out. The ideal child IMO. lol. Jk on the dying part of course, but you get the joke.
@@joolwing I so agree
"Do not try this at home. I am a professional. I am not sure what is going to happen here."
Exactly what I thought as he was saying it!
Professional firefighter, not stump burner 😂
LOL. I think he was wearing the Moe Howard toupee when he said that
Ignoring the obvious for views. "Let's drown out all the oxygen and see what happens"
Hold my beer!
This is like wranglerstar content from 7 years ago - the good days!
d m Agreed. It’s great to see this type of content come back
Agreeded this is the wranglerstar I miss
Same.
While watching this, a small breeze came down my chimney and blew the smell of yesterday's fire into the room. For a second my brain associated the smell with what I was watching onscreen. It actually took me a second to realise that the smell of char was from my chimney and not from that burning tree stump.
It was pretty weird.
Smell-o-vision!
@@aggibson74 Yea, lol!
I'm not sure how I'd feel about this if it was real technology though. It'd probably get fairly disgusting at times.
Like sitting down to eat your dinner, watching your favourite cop show when they discover a rotting corpse or something..
LSD can do that as well.
Now with Smell-o-rama!
I think I figured out the problem. You needed a few beers for this project to go properly.
Sound advice!
And guns, don't forget the guns! Lol.
Absolutely. Lack of alcohol at the beginning was a red flag
Volkert Kreuk
You just had to know it was going to fail, first, he was all by himself, so there was no one for him to say "here, hold my beer and watch this!" to, there was just no way it could have worked.
And I didnt see a single truck. I'd like to know how he though he was going to pull this off without 1 beer 2 accomplices 3 a truck to pick up the first 2
"Do not try this at home. I am a professional" some famous last words.
Hold my Beer!!
He is a fire FIGHTER not a fire LIGHTER mot a professional imo /s
Try thermite it burns at 4000 degrees. It is used commercially to weld railroad tracks together. I believe if you made a 4x4 plunge cut and used that to contain the reaction it would work well. There are lots of videos on how to make it. The simple formula is: iron oxide + aluminum w/ magnesium to catalyze the reaction being a self oxidizing reaction air would not be a issue.
(Fe2O3 + 2 Al → 2 Fe + Al2O3)
thermite is always fun !
@Sponge Bob What does that contribute to the rxn?
lucky for me I work for the railroad and know where thermite is kept
Drill multiple holes, and soak in diesel or kerosene for a day or two. Then let the fun begin
30-day candle!
Add potassium nitrate from the hardware store to the holes before you soak with fuel oil. It'll help act as an oxidizer deep in the stump where you aren't getting any air. The KNO3 at the store sometimes even lists stump removal as an on label use.
Thanks I needed that, when you walked up and said this is lame I had to LOL for a couple minutes. I've been laid up for a little while and you made my day🤣😁👍
rocket stove it ...with phosphors !
Most common last words in the South "Hey ya'll, watch this!"
You forgot, "hold my beer "
Smuther ut n gravy is pretty common, tasty too.
*hold my beer, and watch this
Been there, done that, doesn't always end well, but it was fun. 🤓🍻
You need to keep constant airflow. The coal went out because all that moisture from the log is steaming up and putting out your fire. Keep that blower on it to introduce more oxygen and keep out the moisture.
Anthracite requires constant air flow
Did this once. We just built a campfire on it and sat around it for a few days. At night we didn’t have to add any wood cuz the stump burnt and smoldered then in the morning tossed some camp wood on top and by day 5 it was gone lol.
I live in town, I have a stump about 4 feet from the road. I wonder if anyone would mind if I did this same thing lol. sit out front with a lawn chair and a cold beer and watch it. Im sure someone would give me a funny look. :)
That's like the perfect solution. Could also soak it in diesel before lighting it up
Drill lots holes in it.
Fill with old oil every day for a week or 2.
Build a big fire on top
Please dont do this. Pouring oil freely into the ground and letting it absorb will do almost nothing for your fire. You're just leaking toxic chemicals into your land. burning the fuel/oil asap is actually safer then letting it runoff...thats why oil derricks will flare fire on top
AlkalineGamingHD oil derricks flare to mitigate explosion hazards. Controlled release of energy.
The oil came out of the ground to begin with. Send it home!
@@tannerfrancisco8759 lol
Use cooking veg oil and NOT Eng oil
The correct story is "Indian makes small fire, sits close to keep warm. White man makes big fire, keeps warm hauling wood."
I am a professional? Lol
That's funny
@John Signs the community also identifies as Indian, there is a swathe of social commentary and studies on this subject. Leave your boxes at home, no one wants to fit in them
@John Signs why wouldn't you just assume that it was in fact an Indian who said that? And why would you just assume OP is a oppressive white male out to enslave you? A little paranoid, isn't it?
Or White man makes big fire and has to stand half mile away and freezes to death.
I love how you share the fails and successes. I’m only 24 and I’m building my house and homestead. Striving to become a professional home owner. Keep the content and reviews coming. Before I buy things I know I’ll be using more than just once I always check your channel to see if you’ve reviewed it or not.
Cut a small square about 6-12 deep and about 12inches round (square). The cut 2 channels connecting it to the edges on opposite sides. Build a fire in the square you cut out in the middle. The 2 channels you cut to the edges allow for airflow. Just keep feeding it and over a couple days, depending how big you get it, it should be mostly gone.
Make thermite powdered Rust and aluminum powder
@@anthonypetrillo841 it will dry it out and set it alight much the same as white phosphorous would.
@@anthonypetrillo841 at least it would turn on the anthracite
czcams.com/video/0ch92Hp-1Vo/video.html an example of it getting the stump burning
Aluminum? What about magnesium? I’ve heard that once they catch on fire, they won’t stop till they’re done.
@@Kurohitsuji365 Yep aluminum powder mixed with iron-oxide powder( rust) is Thermite
"Don't do what I do, I am a professional."
*Pours gas into fire from canister*
"75 x 25 mix of gas and diesel" ...ignites and burns a lot less intensely than 100% gasoline.
That kind of thing has put gas can makers out of business. People pouring fuel onto fire got burned and blamed the gas can maker.
25 / 75 gas/diesel
And he pulls it back and splashes it around his feet. =)
lmfao
I don’t care how old a guy is we’re all 12 years old inside.
Or, as my saying goes : "An adult is just a child who grew up"
Us men don't get older just bigger
Big bore and 2-4 ventilation counterbore. Then start chemical fire with potassium permanganate and glycerin.
I agree with the big bore and counter bores for ventilation.... I think I would have soaked the stump in diesel prior to ignition. One excellent chemical to add to the mix would be powdered aluminum. Don't breath the smoke. Burning metal will bring the temp up really high. With respect to the diesel gas mixture you were using... I don't think I would want gasoline anywhere around something this hot.
i like the cut of your jib.
Something tells me this will turn into a series...
WihGlah here’s hopin
so?
This week on episode 42 of how to remove the same stump...
More holes, soak it with diesel, stack rocks around it like campfire and build a big fire on top of it.
Fix it with fire!!
PS you are looking fit Cody!
Add more gas? 1:1 mixture?
start the coal fire with A wood fire
Fires not going okay I got it 1 gallon on gas should do it........ at least I'm not the only who does this
Bore out a Handful of holes and Drop in some Thermite!!
If that doesn't work... GO ALL OUT && JUST SEND IT WITH DYNAMITE!!
l like your idea.
There's an easier wasy: Make it worth money, then try to stop people stealing it. It will be gone in no time
LOL! You're wasted here. You should get a job advising governments! ;-)
Until a war starts over ownership rights
This is why I love You Tube. Always somebody out there with a creative idea.
Only the somebodies with ideas CZcams like are allowed to stay on their platform.
Fire air supply has to come up through the coal bed to fully involve the combustion, think forge.
Air Flow, its all about the airflow. No airflow down in and through the stump, no fire!
Let's ask Tim Allen... more power?
I'm sure Binford makes a great blower ;)
Have you thought about drilling some holes and starting a thermite reaction on top? The molten metal should flow into the holes and hopefully start the stump going pretty well. I used to start wet brush piles with small amounts of thermite. It was always hot enough to dry and light enough brush to get a self sustaining fire.
This is the type of "yard work" my wife is never is told about.
yes, this and out of control leaf burning information is on a "need to know" basis!
Amen!
So glad I'm not alone on this one
I had some good results on a smaller stump with Kingsford charcoal, and a blower. Not quick or violent.
Btw, beware the white "smoke" when you are pouring fuel on a fire. When I was 12, I discovered that vaporized fuel burns REALLY well, and is faster than a haircut.
Buy Mrs.W a spa day package. Then use explosives
this is such a good idea
My Dad and I took one like that out once when I was about 14. We used a crowbar to bore about 10 large large holes between the roots, angled down at about a 45-degree angle. Stuffed two sticks of dynamite in each hole with one blasting cap each, tamped it down with clay, connected all of the blasting cap leads together, walked 50 yards back to the car, lifted the hood and touched off the blasting caps on the battery. Mr. Stump jumped straight up out of the ground about ten feet but was stopped in his flight by the still-attached roots and he slumped back to earth, looking all sad. We sprayed dirt and rocks in all directions for about 50 yards. It's a miracle the windshield of the car wasn't smashed and that we weren't hit. Got Mr. Stump out, though.
Went to the local Lowe's but they were all out of dynamite, amazon didn't have any either. must be a lot of people with stumps to remove?
@@dacdac52 - Cute. Of course you can't buy dynamite from ordinary stores. Dad owned a construction company and held some kind of certification allowing him to purchase the stuff from a manufacturer and use it with a permit issued by the municipality.
@@mikeohandley6765 I figured that, I was just making a joke. Enjoyed your story.
Drill more holes and soak the stump with diesel fuel for a week before burning. No. More than that. Like 40 holes and 10 gallons of fuel. Then let er rip
Jasper Weaver ^^^^^^this
I was thinking the same. Deffo want to open the stump up a bit.
Soak with gasoline and let it explode hahaha.
yes make the garden toxic... great idea
I thought it was a good idea. Thanks for your validation. I needed that
Barrel fires for removing strumps works wonderfully if you have the time. I threw a barrel on a stump, threw in about 20 peices of fireplace-sized-chopped peices of wood, came back 24 hrs later and the stump was gone 6" beneath the ground with some roots burned too
Dig out around, drill horizontal to existing holes....
Ck out rocket stoves. You've already got the body all you need or the holes for air flow.
Bore a hole 1’ in diameter and 3’ deep, and keep the interior walls of it burning away until you reach the outer perimeter of the stump.
Good attempt but you were lacking air in the bottom of the holes. When you drill your holes make sure they are connected on the bottom so a draft is created. If there is an exposed root that looks like a large cavity is close to it you can also dig it out to create a draft.
exactly my thoughts 3 things make fire and 1 was missing!
Same concept as a Dakota fire hole
Only a couple minutes in--what a good idea for a video, man. Always wholesome content from this channel.
an great uncle of mine would bring home a couple sticks of dynamite from the army camp he worked at and would blow them up. granted it wa the 40s.
I don't know dynamite is a little hard to come by in 2019 but he might be able to get a hold of some Tannerite and blow up stumps with that Tannerite also has the added bonus of requiring a shot from a high-powered rifle to detonate it so you get to bring guns into the mix too for a video that would almost certainly be demonetized but very entertaining
I use termites, just cover the flush cut stump with a pile of dirt to hold in moisture, dampen when dry and let the termites feast.
As they chew the stump the dirt subsides into the stump cavity. It takes a few months, but termites will eat the whole thing.
If this is not exciting enough, install a microphone underground to hear the munching.
I use a cousin of termites. "Thermites". ...They're much quicker.
@@sparky6086 excellent
I do this. When I am not using my termites to eat stumps, I store them next to my house to protect them from the elements.
I was waiting for that hot fuel to reach fuel airmixture and boom.but it didn't happen😟
And that is the difference between combustible diesel fuel (flash point of 100 to 130 deg F depending on grade of diesel) and extremely flammable gasoline (flash point -45 deg F).
@@shdwbnndbyyt gasoline is higher refined diesel .it's just a thinner petroleum distillate. When real gas becomes obsolete(not that far away) you'll find dudes loading up their stills with offroad😂😂😂.
Anthracite coal needs sustained airflow, you puth too much coal in as well. Had you kept the blower going, it would have worked just fine
I’ve done several large stumps like this,Drill 1 hole straight down an 4-5 at an angle that meet the center one like a camping log fire,the trick is to keep adding sticks/limbs to it.
Last one I did even burnt all of the root system up.
I started it Friday Morning and Sunday it was still burning but almost completely gone.
Great idea
Now he just needs to buy a hole hawg, one and a half inch wide auger bit and the auger extension to do that huge stump.
Pro tip - if you know a plumber or electrician ask them to borrow theirs for the weekend.
As much as I enjoy watching lunatics pouring gasoline on fires, I'm really glad nothing obvious happened. God bless diesel. 🤣
I thought he said it was a gasoline Diesel mix
Rent a ditch witch stump grinder. It'll tear through that in about 30 mins.
rocket stove concept is also called a Dakota hole and works well especially if you use that blower. could also use thermite to get it hotter.
Build a fire pit around the stump then have a regular hot dog roasts, over time that will get rid of the stump
Yep...burning out that atump is a good excuse for a weekly bonfire.
Me: "This is cool."
Wranglerstar (11 minutes in): "This is lame!"
Ease up on the liquid fuel, be patient, it will work.
One thing not to do is rely on flammable liquids. Next, if you build a better chimney by reducing the diameter of the top by 1/2 or more, you'll increase the ability of your can to hold in the heat, creating a natural turbocharger effect without much more any additional inflow pressure, turning your can into nice cherry red and reducing the stump in hours. Add air as needed to keep the turbo effect going. Experiment with some stove pipe and a damper (4 to 6 feet is enough) to make a really scary jet engine effect. You'll know it when you've got it dialed in with a true tornado of blue flame coming out of the top, a fair bit of noise and the barrel or can turning from cherry red towards a white hot almost melting the can heat. Since you went to all the trouble of drilling the holes into the stump, take and drill a few more and direct air through some old steel piping under the stump, turning itself into a burning chimney inside the confines of the can. Don't waste the heat, confine it, which is reducing the carbon by the rapid oxidation more quickly. Go very hot or go home.
Stick magnesium rods into log and light them . Old VW motors work
Post proof of you doing this
"I'm a professional". "Don't do this at home"...Famous last words...
In the usual spirit of experiment and entertain : buy 100,000 wood worms, drop them all on in one go and time lapse it.
You need to introduce more air.
I would say rocketstove that stump.
Dig down as far as you can. And start burning it there. not from the top.
You will need to fuel it for a few hours. but once it's going. it's going. (then fuel it every hour or so)
Taller chimney. Start fire low with lots of air and fuel.
agreed
@Treespirit - correct. I've actually done something similar & it worked.
I excavated a 3ft wide by 3 ft deep trench around the stump. Then built a fire all around & on top.
agree,
dig from side as deep as you can.
set a fire from bottom, supply air from bottom with the blower.
let the blower control the burning direction.
It is hard to believe you worked as a fire fighter pouring a mixture of gasoline and diesel fuel pretty gutsy move in my opinion.
Firefighter here. One of the dumbest things I have ever seen. If you try this at home, be advised there is a chance what happens next is you, on fire, running and screaming while spreading flaming fuel from your container all over and setting EVERYTHING in your area on fire. There are less stupid ways to add fuel to a fire (trrowing an entire (open) container into the fire like a can or plastic yogourt container) still not recommended, but less likely for you to become a human torch!!! Never, EVER do this!!!!
@@pb2959 Not gonna sit here and try to say that pouring gas/diesel on a fire is a smart idea, but you guys really make it out to sound like its just going to explode if you even get within 50ft of a fire with gas. It's not going to jump out of your hand and run to the fire while pulling you along with it. You shouldn't go trying to pour gasoline on a bonfire that's raging 3ft high, but if you are trying to get a small fire started with nothing but a match, gasoline will make that much much easier. Or if you are, for example, trying to get a large fire started (like him in the video) then it's a pretty good choice. Gasoline is flammable but ffs, people gotta stop being so scared of everything. And one more thing, if you don't understand just how flammable gas is then it's easy to tell people to "IGNORE IT AS A POSSIBILITY AT ALL COSTS OR ELSE YOU WILL DIEEEEE A HORRIBLE DEATH" whereas if more people had that experience with gasoline already, then they are more than aware of it's capabilities and will lead to more people being careful with it.
Scaring people isn't anywhere near a good motivator for reducing the likelihood of people being stupid. It just makes those stupid people want to do the scary thing.
I know someone who was trying to add gas to a smoldering fire. It flashed and followed fumes into can and exploded the plastic gas can. If his wife would not have been home to put him out he would have burned to death in his backyard by himself.
@@pb2959 he used the same mixture as is in drip torches, if you've ever used one then you should know it is not super explosive
Chain saw: cut out a center hole like you said.
Drill: drill 6 diagonal holes at a 45 degree angle from around the outside of the diameter of the can into the center hole.
Flares: light 3 flares and put them flame down into every other hole. Flare flame is now in the center and burns. The other holes allow air to flow into the bottom of the hole to get oxygen.
As the flare burns up the hole it ignites the rest of the stump.
Charcoal: pour a bag of charcoal into the hole.
Chimney Can: place the can over the fire and wait.
Drill straight down the middle, then in from the side low down, add a taller flue to the side-channel, and treat the stump like the fuel-end of a rocket-stove
"This is lame!" Agreed.
Rocket stove idea sounds best. Gonna need that airflow...
My dad taught me how to make napalm, boil gasoline and mix in ivory soap shaving. I know this because I asked him if he every did anything stupid as a teenager, turns out boiling gasoline over an open flame in the middle of the pine belt in summer wasn’t quite number one on that list.
You can also avoid boiling gasoline by swapping the soap for styrofoam.
Or power Borax detergent booster!
Need high heat.
Dawn dishwashing liquid? You can get the green apple scent! :-D
Yah that’s actually not how u make Napalm sorry u thought that also wouldn’t try that u don’t boil gasoline it’s litterally impossible it will start on fire
Literally the most dangerous thing possible to pour diesel/gas on a heat source with no open flame and turn it to a super heated vapor. Could have blown up soooo bad. Once that vaporized fuel hits an open flame or reaches flash point 🔥 boom! I know because I’ve done it before in my fire pit and it was INSANE
Wood Knot it be funny, if you did knot know how to Type, prior, to the Axeplosion and you did know how to Type, knot more than Tree Miknots, after, said Axeplosion. Any Lawnloggers Wood Gas(p) and say "I canknot beleaf Wood i Saw. RJ could knot Type, then, the Axeplosion caught RJ, on Fire, Fir Tree Miknots. Aftreewards, RJ could Type. I, am Stumped." That, is Wood they Wood say and they Wood have evfirtree rot to, if they Log, in, to their Acornt, First. Just joaktreeing. Fell Tree Lawnloggers Wood have been Cord, up, in Tree Axeplosion.
Diesel doesn’t have a flash point
I always just make my stumps my camp fire pits, before ya no it you had some good family time and the stumps gone.
You could try cutting a deep "X" in the stump with a chainsaw to allow for more air to get down to the fire
First off, anthracite coal is very difficult to keep burning, next time try bituminous coal. And drill holes outside the chimney at an angle towards center for air to get lower in the stump as it burns lower in the ground. Soaking the stump in diesel a few days before also helps.
totally saturated solution of potassium nitrate in water. when the water dries leaves behind the PN oxidizer
Because SCIENCE!!
This guys got it, it's simple rocket science. Put in a wet solution of potassium nitrate in water, and when it dries you've got the stump impregnated with a substance that burns. The only problem I see is that the stump or possibly the area around it are staying wet. It would seem that the water table is not too far below the surface where the stump is. You may have to figure out a way too drain the area around the stump first. Also, whatever chemicals and accelerants that you use, will get into the water table for a distance, so be careful.
The coal had way to much fines,use lump coal.
Vegetable oil burns hot like diesel but is better for your soil.
@Ken Mason For weeds I either put down lands scape fabric or newspaper that I wet soak and lay several sheet s thick. Then I put my much down. I agree roundup and petroleum are not great to drink. I have been to a few French fry fires that ended badly for the potatoes and the homeowner. So by that I have seen first hand how well vegetable oil burns. 👮♂️
Maybe start out by drilling lots more holes, then over time marinating the stump in diesel or kerosene. Then (maybe?) build an enclosure around the whole thing (maybe out of bricks?), put a good-sized smokestack on top, so basically you have a blast furnace. Then, drill a hole (your 4-incher) in the middle, dig down around the stump, drill in (maybe several spots) to make air holes, and start a fire (maybe with your anthracite?) in the hole in the middle.
Maybe there should be a Nobel Prize for removing huge stumps... :D
Try drilling holes and add Potassium Nitrite (KNO3) in them and stump will rot.
Greg Douglas if you mean with it’s friends in 15% and 10% increments. Lol nice plug of bentonite clay or kitty litter, pounded lightly in... tap for fuse....light and run like the wind.
or he could add some potassium perchlorate to his charcoal with a little sulfur and watch the stump
just "pop" out of there.
robert fawcett you didn’t read my comment did you....
Steel fire ring around the stump.
Fill with wood, light it and enjoy.
Should get all the roots.
I can vouch for this the rim of an old valley irrigation tire should fit all the way around it and then do a bonfire
stump grinder rental....HD $150/day
I don’t know I’ve been burning a stump for 30 years and its still there lol
I cut up Magnesium aircraft parts, took the saw dust of Magnesium and put in numerous holes. Dump Jet A on it for two weeks. Lit it off using my plumbing torch. Once the Magnesium took it burned for two weeks.
A car tire with broken Magnesium truck rim and used motor oil
YES. And tannerite. Do it all.
Motorcycle parts from 1970's Japan are Magnesium .
certain years of ford f150 had magnesium front ends. Get them cheap from the scrap yard.
Lol
My uncle used to use dynamite, he told us to stand back about 200m but when he detonated the blasting caps bits of tree stump were raining down all around us,
we probably should of been wearing hard hats but we didn’t worry about them because he said he was a professional!?!?
Simon Delaney - go gramps go!!!!!
About 10 pounds of Tannerite should do the trick.
Jw Clark I would say 20 for safety Sallie
Ehh 30 just in case
lol. I was just coming here to say a few boxes of Tannerite should do the trick lol.
@@someguyontheinternet5944 ehh 40 for good measure
50 to be sure
drill two holes that meet, one straight down, one on an angle. Like a rocket stove.
don't send a fireman to do a pyromaniac's job:)
but I like the rocket stove idea
I love that you put a failure (in a good way) on youtube! I' m trying to learn these things myself and I would have done something similar. Can't wait to see what comes of it.
You are my internet mentor! Cody, this is now one of my favorite vids. Thank you, and Ms. W for all y'all do.
You should have gotten a good fire going first before introducing coals.
Go to pond, retrieve Beaver, put fence around stump, insert Beaver, come back month later stump in chips.
Feed air from the bottom
Heat rises and so will the flames
Make several tornado vents on the side so the fire will pull air in and push it up
"I'm a professional but I'm not sure" 🤔😂
In the 1980s I tried a bag of anthracite coal . And quickly found out I need a roaring wood fire to get the coal burning