@Netherboiii5443 I think a 3300 may be a bit too heavy. A 2600 to me is the sweet spot. I use the HRB 2600. Also the SMC Lihv 2800 is a great battery for this plane! Thanks for the Sub!
Nice job . If I can find some 26 or 2700 mAh high c rated packs I’ll certainly buy it. But 3 minutes sucks and it’s a bit under powered . But a great 1st Jet from what I’ve heard.
Its actually not that much under powered its pretty decent. I also tried it on a 2600 and felt it's a bit too much weight and the plane isn't as nimble.
I 3D printed a launch grip for the center bottom for an easier grip,you can also make one out of balsa.It's better than cutting into the plane like seen in an other mod video.
Hi mr. Nice plane and flight. And your videos are very good with a lot of imformation . 😀
Nice job Rube
Great maiden, seems like a winner, zoom zoom Jeff in LA USA
It sure is!!
I’ve got my own Rafale ready for a maiden wish me luck when I fly
Best of luck! She's a pretty good flyer
Thanks I’m actually flying on a 4s 3300 but I’m not sure if it will be nose heavy i gave it some pre flight trims and btw i subbed
@Netherboiii5443 I think a 3300 may be a bit too heavy. A 2600 to me is the sweet spot. I use the HRB 2600. Also the SMC Lihv 2800 is a great battery for this plane! Thanks for the Sub!
Nice job . If I can find some 26 or 2700 mAh high c rated packs I’ll certainly buy it. But 3 minutes sucks and it’s a bit under powered . But a great 1st Jet from what I’ve heard.
Its actually not that much under powered its pretty decent. I also tried it on a 2600 and felt it's a bit too much weight and the plane isn't as nimble.
Cool plane 😎 👌
Very nice, beautiful maiden! A beautiful EDF congratulations 🎊 great 👍 flight ✈! Keep em' Flyin'!
Thanks! Appreciate it!
Awesome flying bud cool jet
Very nice flying. That liperior pro 4s 2200 75c is heavy as 278gr :-)
Excellent. Are you going to try using the gear to take off the grass?
Probably not the grass on this field is too rough. Also I actually don't like flying jets with the wheels hanging down the whole time.
Bravo!
I 3D printed a launch grip for the center bottom for an easier grip,you can also make one out of balsa.It's better than cutting into the plane like seen in an other mod video.
Do you have an stl file or upload on Thingiverse?
@@jeffbrundt7740 It's called a "all prro launch skid", It has to be rescaled for a desired length and thickness.It is very small as is'.
Nice. Just got mine today to go with my 80mm Rafale.
What was your flight time and battery percentage after landing?
I was on a 4s 2200 set my timer for 3mins. It came down around storage charge don't remember the percentage but a 3min timer is good.
Do you use stock CG? Thx.
Yes. It's 90mm -100mm from wing root. I tried to get it in between that. I wanted it to be neutral for the Maiden Flight.
I would launch it from the wing with safe mode on