Absolutely gorgeous man. The only one ive seen come close to this level of craftsmanship was a scratch built treadle powered jewelers lathe, and trust me, you can ask the wife, ive watched a lot of power tool scratch builds! 😂
Hi, How are you? Thanks for your message. I dedicated a lot of time to this project. I'm happy to receive your message. Thank you so much!!! Share with friends!!! 🙏🙏🙏@travisjohnston1923
Hi, how are you…. I’m very good after your message. 🤣🤣🤣🤣🤣🤣. Thanks for comment, this is fuel for my channel. A long time a go, when i was…. Kkkk teenage, i had have only three tools for made the things. During the life, i create a habit: don’t buy, because you can make! Today, I create projects like that and share with yours… when I receive message like that I fill very very very good!!! Thanks for all! 👍🙏😉 @ianstyles9759
Hi, how are you? Thanks for message. I created a sketch and I bought that like a project. About the chuck, I bought in amazon. I believe if you can buy both in amazon. Tips: 1-buy that’s parts (motor, chuck…., 2-build the lathe. 🙏🙏🙏 @bonesstones6584
Opa, tudo bem? Agradeço muito sua mensagem. Se animar construir um torno ou qualquer outra “máquina” estou a disposição! Pode me chamar no WhatsApp ou pelo telefone!!! Grande abraço Wilson!!!!🙏🙏🙏
Tudo bem? Tenho um lay-out que já apresentei nos shorts, visualmente você consegue ter uma ideia bem detalhada do conceito do projeto. Não fiz desenhos iniciais, fui construindo na medida que as peças foram chegando. Uma espécie de quebra cabeça sem peças definidas. Se não conseguir nos shorts me avise que posso te ajudar! Grande abraço e obrigado pela mensagem!!!!
Hello friend! I plan on building something like this for myself, and had some questions. First, what did you do for the spindle? Did you purchase one, or get it from a broken lathe? Or make it?
Hello friend! Good idea, you can make like that. About the spindle, this is very importante. I made a sketch and send to mechanic. You can buy in amazon all the peace’s. I bought wash machine motor and controls in amazon.
@@woodtransformer So you had it custom machined? My university has a machine shop, so I might make it there. How has the lathe held up? Is it still going strong?
@@woodtransformer I'm considering making my bed ways out of angle irons, 2x1.5 inches, for additional strength. What do you think of this idea? Also, how powerful is your motor?
@Butteredthanatoast Great! The estructure is very important than a strong motor. Your project, I believe, is a more professional than my. For select the motor you need a lot of attention... 1) what the size of pieces you will make with that lathe? 2) what command control you use for speed control? 3) wells for rpm? My project, 1/4hp, motor well 2”, spindle well 3,5”... my limit piece size 7” diameter.
Awesome video. Did you create your own plans or use premade plans? Would love a pdf plans of this. I have an old washing machine motor I am looking to repurpose and this would be great. Also want to incorporate 3d printing as well.
Hi, I did everything using wood scraps! The base was: Motor, axle and chuck! I'm thinking about designing all my projects. In the meantime I can help you... I have videos in the shots of a detailed drawing of the lathe that can help you. Any information I am available to help! Thank you very much for the message! @3s-Woodworking
Dear Sir, The video DIY Wood Lathe was good job I like it but it was not detail inside about material. Please send me detail of chuck,bar and UCF sir, thanks.
Hi, how are you? This project was made with scrap wood. About other parts, i bought in amazon. See the links. Important: Before buy check measure between pieces. amzn.to/4b2kgtF amzn.to/3S3TGYt amzn.to/3u0PiBo amzn.to/3HoxZxn Thanks for your message and subscribe. @giangla8171
Hello! how are you doing? Sorry, I didn't understand what you wrote. Would it be possible to tell me in other words so that I can comment? @mastermaker666
Hi, i used: Ipê, Cumarú, Mogno e Cedro. I show the names in portuguese language. If you need help for anything, send a new message. See you a next time!
Absolutely gorgeous man. The only one ive seen come close to this level of craftsmanship was a scratch built treadle powered jewelers lathe, and trust me, you can ask the wife, ive watched a lot of power tool scratch builds! 😂
Hi, How are you? Thanks for your message. I dedicated a lot of time to this project. I'm happy to receive your message. Thank you so much!!! Share with friends!!! 🙏🙏🙏@travisjohnston1923
Well, I hope you check this message. I have access to Black Oak lots of it and I need a lathe maybe do some trading?
Who needs to buy when we get a full lesson on engineering and a more solid Hotpoint Wood Lathe without the soap bubbles..😂😂💕💕🤣🤣
Hi, how are you…. I’m very good after your message. 🤣🤣🤣🤣🤣🤣. Thanks for comment, this is fuel for my channel. A long time a go, when i was…. Kkkk teenage, i had have only three tools for made the things. During the life, i create a habit: don’t buy, because you can make! Today, I create projects like that and share with yours… when I receive message like that I fill very very very good!!! Thanks for all! 👍🙏😉 @ianstyles9759
WOW, ein richtiges Diesner Stück !
🙏🙏🙏😄😄😄
Beautiful job
👍🙏👍🙏👍🙏
Этоже просто куколка станочек
Привет, как дела? Спасибо за ваше сообщение. Хорошего дня!
Wonderfull Job
Hi, thanks for message!!! 🙏🙏🙏
Beautiful lathe. We shared this video our homemade tools forum this week 😎
I am flattered by your courtesy. thank you so much! If you need more information, I'm at your disposal. @homemadetools #homemadetools
Beautiful job! The parts you used for the tail stock, genius! Where did you find the threaded rod with a pulley attached?
Hi, how are you? Thanks for message. I created a sketch and I bought that like a project. About the chuck, I bought in amazon. I believe if you can buy both in amazon. Tips: 1-buy that’s parts (motor, chuck…., 2-build the lathe. 🙏🙏🙏 @bonesstones6584
Meus parabéns, olhei o motor de tanquinho da WEG e pensei, este canal é brasileiro? Excelência, louvor no registro de torneira, genial.
Opa, tudo bem? Agradeço muito sua mensagem. Se animar construir um torno ou qualquer outra “máquina” estou a disposição! Pode me chamar no WhatsApp ou pelo telefone!!! Grande abraço Wilson!!!!🙏🙏🙏
Lindo trabalho, ficou magnífico, você tem o projeto dele em pdf para disponibilizar? obrigado.
Tudo bem? Tenho um lay-out que já apresentei nos shorts, visualmente você consegue ter uma ideia bem detalhada do conceito do projeto. Não fiz desenhos iniciais, fui construindo na medida que as peças foram chegando. Uma espécie de quebra cabeça sem peças definidas. Se não conseguir nos shorts me avise que posso te ajudar! Grande abraço e obrigado pela mensagem!!!!
Hello friend! I plan on building something like this for myself, and had some questions.
First, what did you do for the spindle? Did you purchase one, or get it from a broken lathe? Or make it?
Hello friend! Good idea, you can make like that.
About the spindle, this is very importante. I made a sketch and send to mechanic. You can buy in amazon all the peace’s. I bought wash machine motor and controls in amazon.
@@woodtransformer So you had it custom machined? My university has a machine shop, so I might make it there. How has the lathe held up? Is it still going strong?
@@Butteredthanatoast Very strong! Was made for that... Stability, firmness and security. If you need any help, let me know!
@@woodtransformer
I'm considering making my bed ways out of angle irons, 2x1.5 inches, for additional strength. What do you think of this idea?
Also, how powerful is your motor?
@Butteredthanatoast Great! The estructure is very important than a strong motor. Your project, I believe, is a more professional than my. For select the motor you need a lot of attention... 1) what the size of pieces you will make with that lathe? 2) what command control you use for speed control? 3) wells for rpm? My project, 1/4hp, motor well 2”, spindle well 3,5”... my limit piece size 7” diameter.
시운전을 안보여주니 아쉽습니다.
안녕하세요. 잘 지내죠? 메시지 주셔서 감사합니다. 1:11:03에서는 손잡이를 만드는 테스트를 보여줍니다. 저거 보이나요? 감사합니다.
앗. 대단하십니다 멋진작품이 탄생시킨 사장님이 부럽군요 대박나세요 .
Awesome video. Did you create your own plans or use premade plans? Would love a pdf plans of this. I have an old washing machine motor I am looking to repurpose and this would be great. Also want to incorporate 3d printing as well.
Hi, I did everything using wood scraps! The base was: Motor, axle and chuck! I'm thinking about designing all my projects. In the meantime I can help you... I have videos in the shots of a detailed drawing of the lathe that can help you. Any information I am available to help! Thank you very much for the message! @3s-Woodworking
Dear Sir,
The video DIY Wood Lathe was good job I like it but it was not detail inside about material.
Please send me detail of chuck,bar and UCF sir, thanks.
Hi, how are you?
This project was made with scrap wood.
About other parts, i bought in amazon.
See the links.
Important: Before buy check measure between pieces.
amzn.to/4b2kgtF
amzn.to/3S3TGYt
amzn.to/3u0PiBo
amzn.to/3HoxZxn
Thanks for your message and subscribe.
@giangla8171
Forgot to mention this black coat is seasoned also
"Kit MDF" is cyanoacrylate (according to some page I can't read :p), so I think that's like superglue.
Hi, How are you? Yes, i used wood glue with activator. 👍👍👍 @lowa599
Using thumb as push-stick is one distraction-sound of to the side away from making it a disposable item.....
Hello! how are you doing? Sorry, I didn't understand what you wrote. Would it be possible to tell me in other words so that I can comment? @mastermaker666
I think me means that you came close to losing your thumb by doing something dangerous.
If anybody’s looking, I have access to Black Oak will discuss the price range or maybe even trade a wood lays for black oak?
What kind of wood is this?
Hi, i used: Ipê, Cumarú, Mogno e Cedro.
I show the names in portuguese language.
If you need help for anything, send a new message. See you a next time!
@@woodtransformer thank you!