We couldn’t ask for a better teacher.. Thanks for the great content.. every time l see one of your videos, l learn something new.. ounce again.Thanks brother
I have a question, I have that wireless bronc v1, but I put the batteries to full charge and when I put it in the machine it only marks up to 86% more or less, does the same thing happen to your machine or does it appear up to 100%? ???
Yes I change voltage because of type of skin, not the type of technique 8,5-9 V for Flux For other machine can be other voltage, depends of engine I set the voltage mainly by feeling vibrations of skin
Could you do something similar in water colour? I would love to have bigger tattoo matching the one I am having 🧡🌺 I dont know what else will look good with my flowers and bird in water colour 😊🥰
great video! Can I ask you something? I'm a beginner and I learned that I have to be careful not to go over the same line more than twice because I can hurt my skin... Is it true? In this video I can see that you pass more than two or three times over the same line and it is beautiful, I can feel the freedom in the gesture :). I would love to try this technique.
Hard to say… in general , fast But whipping it’s a combination of machine speed and speed of your hand In others videos with whip shading you can watch moment in real time speed
@@AlexKonti really, I use Cheyenne sol nova unlimited 4.00 mm stroke, but I have problem with it, its like chewing the skin and it’s fast going red when I whip shading is this deferent between company to company ?
@@pawenetkowski5246 hard to say… i think it’s more about stroke and speed, not machine I use Spectra FK irons during last 6 years, and it’s good for every kind of work, in my opinion 😉 In few days I’ll have new machine, not so expensive as Flux, will see what can I do with it My partner work with not expensive polish machine by Kwadron- and do great whip shading
@@AlexKonti and I'm imagine how reasonable the tattoo artist is right? Because I live in Houston Texas and most of the tattoo artist man they want to squeeze you till the last drop. That probably will cost you like 1500 here, I started my arm couple years ago and damn I never finished it and I probably I never will, for half of my arm the last cuote I got yesterday was over 2000, that's more that I spend in my mortgage payment
@@AlexKonti hi mate, could you tell me plz What is the difference between these two needles? I can not do the same shadow with 0.25 needle? Are you using 3RL ??
Loved this, the amount of detail and textures you have put in to this beautiful piece is amazing
This was really aesthetically pleasing to watch. This video was really inspirational thanks.
I love thissss. ✨
Solid stuff. I have been slowly moving into this style of shading and these videos are helping me a lot.
Yo this video is epic ! That’s camera is great
We couldn’t ask for a better teacher.. Thanks for the great content.. every time l see one of your videos, l learn something new.. ounce again.Thanks brother
Thank You for motivation 💪😎
Дякую, люблю спостерігати за Вашою роботою
Rewelacja 🥰
Beautiful💜💜💜
So fun to watch.
Awesome man. So much talent.
Thank You 😎😊
Beautiful
Alex úžasné wow
Muito bom 👏👏
Cuando haces el arrastre que boltaje usas
This was very useful thank you
What voltage is your machine set on for this technique ?
canal muito bom,gosto do seue stilo de vídeo.
Great video... i would like you to show if you o ly did it with a solid black or grey wash... 3rl
What did u put to make the stencil stick
I ha e a question your lining and shading at same what needle are you using
This is awesome! 🔥🔥 Viewers really learn in watching your videos🔥❤️ I wonder how you prepare your stencil, can you make a tutorial?
Thanks 💪
Yea, I think, fort my video with explaining will be about stencil
Stay tuned😉
Dope! Is that a 3rl Bug all the way through?
I have a question, I have that wireless bronc v1, but I put the batteries to full charge and when I put it in the machine it only marks up to 86% more or less, does the same thing happen to your machine or does it appear up to 100%? ???
Exactly the same
I thought batteries not fresh 😁
Nice
Hi bro🙂 Nice work and great video 👍👏✌️🤩
Using only black ink? (In this video)
Thanks 😉
🙏 black in one cup and clean mix solution in second😉
A que velocidad y agujas as necesita en el tatuu
❤️❤️❤️
Looks Great Alex! If i may ask which printer are you using for your stencils?
Epson ecotank + stencilstuff ink inside😎
Thanks man, appreciate the quick response. Keep up the great work. 👊🏻
Saludos
what voltage? you whip shade with same voltage for line?
Yes
I change voltage because of type of skin, not the type of technique
8,5-9 V for Flux
For other machine can be other voltage, depends of engine
I set the voltage mainly by feeling vibrations of skin
@@AlexKonti thank you for your help!!!!
Could you do something similar in water colour? I would love to have bigger tattoo matching the one I am having 🧡🌺 I dont know what else will look good with my flowers and bird in water colour 😊🥰
Of course 😊 welcome 😉
How much does two. Julie
It looks amazing; how long did it take you to do it?
All info in description😉
great video! Can I ask you something?
I'm a beginner and I learned that I have to be careful not to go over the same line more than twice because I can hurt my skin... Is it true? In this video I can see that you pass more than two or three times over the same line and it is beautiful, I can feel the freedom in the gesture :). I would love to try this technique.
Don’t know how to explain… you must feel it
You will learn to feel it with experience
And important- I don’t use small needles that is most traumatic
wow great job O_o i have a question, is the same tension and ink for lining and whip shading ?
Yes, for this kind of works I use black only
what the size of needle??
Great video I enjoy the techniques, what voltage you use to this?
Thanks 💪 8,5 V on Flux
Ayos master
did you use black or triple black for this tattoo amazing work btw
World Famous Legendary
@@AlexKonti you use the legendary ink to dilute for shadows too?
@@chizoyi1 of course 😊
👏👏
love your videos but how do you deal with a client that doesn’t hold still
Haha, here is just two options - hold still and don’t move or go out 😜💪
Your work is great 😍😍😍What is the typy of needl that you use in this video ???
Description 😉
@@AlexKonti 😢you did not answer me
@@hope9621 really?! Read description under video
Buenas noches que velocidad la usas para hacer ese efecto una disculpa por no ablar inglés
Hard to say… in general , fast
But whipping it’s a combination of machine speed and speed of your hand
In others videos with whip shading you can watch moment in real time speed
Hi dear,
How much stroke your machie when you doing whip shading?
And your work is great ❤️
3,5-4
But I prefer 4mm😉
@@AlexKonti really, I use Cheyenne sol nova unlimited 4.00 mm stroke, but I have problem with it, its like chewing the skin and it’s fast going red when I whip shading is this deferent between company to company ?
@@alawahdan2755 of course
Cheyenne softer
Flux harder
Try to set higher voltage, 9-10
@@AlexKonti Thanks a lot 🙏🏼
Hi you make a video with yours gray wash ?
Hi
My gray wash? What do You mean?
What kind of paper did you used on stencil? Thanks
Special transfer paper for stencil ink
@@AlexKonti Is it made with inkjet stencils?. Nice 👍
👌🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
hi sr what do you use 1207rl or 1007rl?
12
How to keep the stencil for longer period?
Good cleaning skin before put stencil and let it dry well
@@AlexKonti I usually clean with alcohol and then leave it for 5-10min. Are you wiping with green soap?
@@lemmeink.studio leave it for 20minutes
Yes, green soap (don’t add too much concentrate to water)
what kind of needles/cartridge did you use?
Inkez, dklab, big wasp
With membrane
7-9rl, 15-21RM, 9rs
@@AlexKonti thanks 👍😉
What's the 0,35?
😍👍
what's the stroke of the machine?
4,5
@@AlexKonti Hi.
What machine do you recommend for Whip shading?
@@pawenetkowski5246 hard to say… i think it’s more about stroke and speed, not machine
I use Spectra FK irons during last 6 years, and it’s good for every kind of work, in my opinion 😉
In few days I’ll have new machine, not so expensive as Flux, will see what can I do with it
My partner work with not expensive polish machine by Kwadron- and do great whip shading
Sir what needle you use??
Read descriptions 😉
Where you locate
Poland
Pratice en decalc
Hello dear artist. What size pcs this 12-07 RL needle ?
Hi
0,35
@@AlexKonti taper ? :D short medium long extra long taper ..?
@@baggelclander5368 this needles have no type of taper… so medium I think
Not long for sure. I don’t like long taper
@@AlexKonti thank u so much sir
What tattoo gun is that
Flux
🥰🥰👏👏💕
😊🥰
Medida de la aguja?
7rl 0,35
Muchas gracias🙌🙌🙌🙌 saludos desde chile🇨🇱🇨🇱🇨🇱
@@user-gy9lr5jv2m спасибо) 3rl у меня даже нету😬😁
Like how much it cost a tattoo that big ???
Price depends of county, region, and even of city 😊 in Poland for example it can cost $300, but in Norway $800-1000
@@AlexKonti and I'm imagine how reasonable the tattoo artist is right? Because I live in Houston Texas and most of the tattoo artist man they want to squeeze you till the last drop. That probably will cost you like 1500 here, I started my arm couple years ago and damn I never finished it and I probably I never will, for half of my arm the last cuote I got yesterday was over 2000, that's more that I spend in my mortgage payment
@@713TacBear that’s why I have many clients from Norway and Iceland 😁 with fly and hotel tattoo here will be much cheaper than they have at home
@@AlexKonti I wish I could do the trip to finish my sleeve with you
💎💎👍
How many volts you use it ?
8.5 on Flux
Needle 0.25?
0,35
Are you using a liner for every thing
@@davidgregory1229 i was wanted to ask that too
@@AlexKonti hi mate, could you tell me plz What is the difference between these two needles? I can not do the same shadow with 0.25 needle? Are you using 3RL ??
Mds, olhei rapido, pensei q o dedo do cara era uma rolha, se é q me entendem jahahshsjs
Possible watsap
❤️❤️❤️❤️
😮😮😮👏👏👏