Maytag Commercial Technology washing machine water inlet valve replacement
Vložit
- čas přidán 12. 06. 2021
- #washingmachine #repair #howto
Hey guys this is just a short vid on how to repair Maytag Commercial Technology washing machine water inlet valve replacement
Recorded and edited by: Shane Puckett
Maytag Commercial Technology washing machine water inlet valve
AMAZON LINK: www.amazon.com/dp/B08NSJZSNJ/...
Thank you for your video! Two daughters watched, tore apart, put back together and fixed for our aging parents. God bless!
Thanks man! Had water dripping in the tub. Wife was already looking for new ones. You made me look like a hero and i saved a boat load of money!
Glad I could help!
Thank you. I have the exact same washer/problem. Called a repairman and it was going to be $300+ now I'll just fix it myself. You're a wallet saver, thank you from a single mom needing to save money.
Glad to help. All glory to God.
Same! Single mom here and this video really helped!
You explained this wonderfully! My washer stopped filling up with water and kept giving me LF error! I ordered the part off amazon and saved the video for when it gets here! Thank you so much
Did it work?
Listen, I believe in giving a guy credit when it's due....and you deserve plenty!!!! I was struggling to find a video my washer AND instructions on how to get the console off. You did both and then some....I owe you a beer (and a few bucks)! You saved my wallet a few dollars. Thanks!
Glad to help!
Thank you sir.
Please help I have this same exact washer, it smells bad and I know the water doesn't completely drain out I can move the tub and I hear water swishing in there. I told the repair man about this and he acted like that it's normal and didn't do anything about it and is there a filter I need to check?
Excellent job on your video! Watching video helped me get our Maytag washer back in service with your handy tips on water inlet valve repair. I found cold water valve not opening all the way so I swapped control wires to warm water valve and now washer is filling correctly. Keep up the good work! Thanks!
Kudos and thanks. This was spot on. Those top console tabs were a b%$ch to pop off. I didn’t have enough strength in my fingers to compress them, so instead I was able to push one end with a screwdriver from the top by removing the metal back of the console. It was held with 5 quarter inch hex screws. That seemed a lot easier to see, plus no contortion under the lid and behind the basket. The oem valve was $26 next day delivery from Amazon with 10 year guarantee. Maytag wanted $112 plus shipping. My Maytag model was MVWB865GW0 and looked identical to the one in the video. The machine was only 3 years old when the hot water valve started leaking because it wasn’t completely shutting off.
This new machine replaced a 35 year old Kenmore that I took out of service still working perfectly as a gift to the queen to modernize. She wants to kill me now. This top of the line Maytag doesn’t clean as well, leaves soap in the clothes and was very expensive. The only repair I made to the Kenmore was to replace the mechanical timer unit that wore out after about 25 years. I could have replaced the mechanical transmission, bearings and motor and had plenty of money left over. Now I know why laundromats keep the old mechanical machines. The new ones suck.
Back in the day they built things with integrity and made them to last a lifetime.
After watching this video I ordered the part for our Maytag washer and was able to replace the part. watching made it a lot easier and saved me a big repair bill I spent 39.00 dollars total
That’s great!
Thanks to this video my wife and I were able to correctly diagnose and fix the leaking issue in our washer. It was squealing and leaking water whenever the water ran and when we removed it we found out that it was filled with sediment and debris. Very helpful video that helped save us a few hundred bucks. Thanks again.
Glad to help.
This was EXTREMELY helpful! Thank you for sharing a detailed step by step tutorial
Great video, thanks for sharing. Washer fixed for $34 and took 15 minutes.
This is a great video that helped me save hundreds of dollars. Appreciate the help and perfect directions. Solved the problem of our Maytag washer constantly dripping water into the drum nonstop. Thanks!!
Glad to be of help to you!
I have a Bravos XL washer and looks just like your commercial one and I have the same leak. I found your video helpful to get the control panel off. Got my part ordered from your link and had a coupon code for 10% off on the page to apply to it as well. Thank you for your video!
Glad to help.
Yeah i got the same washer, transmission and water inlet valve went out within 4 years. Thanks for the video, this will help
For those struggling to get the connectors off, I took a tiny flathead and put it on the top of the connector where it looks like a white "T" and tapped on the back end of the screwdriver. Only thing that worked to get those off. Wiggling wasn't cutting it.
Where do I get the model serial number from?
My wash machine is just like that one
Bro, super appreciate you showing us this. Really helpful. I have this same washer. I was looking for something to do and wanted to do maintenance to the washer.
Commenting to bump this video in the search engine. This was exactly what I needed to solve my LF message on mine. Saved me a ton of money. I owe you a beer my guy.
Great video! Based on the comments these inlet valves go bad a lot so you are saving people a lot of money. A lot of people have had a problem getting the wire connectors off and I came close to giving up because I couldn't get any of them off no matter how much I wiggled and pulled. I finally used a fairly large flat head screwdriver right up in that gap in the middle and gave it a couple of gentle taps with a hammer and they came right off.
Thanks. Had the same issue and the video is frustrating when he pre-loosened them.
THANK YOU!
This chap is a lifesaver. Criminally underrated
Very helpful, I was able to replace this part myself thanks to your video 😊
Yeah, I have a Whirlpool washer and the inlet valve goes out annually. The warranty is over so I will have to replace on my own now. Nice video!
The Bravos XL and some other commercial HE models are the same layout (Mine is MVW765FW0) and this video was so helpful! While we didn't have a leak, we got the LF error and no water was coming in. Upon inspection, the input lines were working but we found the cold cylinder valve had a slight crack in it and would fail diagnostics. Replacing the water inlet valves did the trick!!! Thanks again.
Glad I could help .
Thanks for the vid. My machine wouldn’t fill, showing a LF error code. It would shut down. I ordered a replacement water valve (Amazon for around $40) and installed it in about 20 minutes. Next time it’ll take half that time. Biggest challenge was releasing the clips (couldn’t get my paws up in there so carefully used a blade from the top to release). It now works. I loved saving the $300 + it would have cost otherwise.
Glad to help !
Awesome video. Thank you so much. This saved me hundreds of $$$ and made changing this piece out a breeze.
found water in the same place u did and traced it back...grommets seem ok but rplcing whole valve anyway...thanks for the vid and sharing. I hope this will fix the issue. I had taped paper towels around every other valve and hose connection and when i didn't find them wet all and traced the drops i knew this had to be the place. Some times it would leak and then go weeks without any issue.
Glad to help.
Finally ! Took forever to find a video with my exact washer ( most didn’t have agitator) I researched how to put in test mode & water ran with each selection unfortunately no matter what setting I use or what tricks I try the water level won’t even halfway cover my clothes. Even after a full cycle they’re covered in lint & powder v
Did you find the answer, why not filling? Have same problem.
I have the same issue
I have the same issue as well since it was brand new it just does not put enough water into the basin even with Max fill setting. I literally have to put in 4 gallons of hot water on top of the dry clothes before I start the cycle or it will not wash the clothes What a piece of junk this machine is.
You have to push on the front side of the clip, the side that faces front side of machine. Great video. Thanks!
Thanks for the video. Easy fix, as soon as you showed how to get the top off. Oh and thanks for link to part.
No problem. Glad to help!
I don't see the link...help.
Super helpful thanks for the video.
Great video!!! The only thing I would add is to hook the water lines back up and turn the water on before placing the control panel back on and run a cycle and check for leaks around the new water inlet because the new one I recieved was defective causing it to leak water. Could cost you a small fortune in water damage to your floor if you dont check it for a leak. Again very useful video.
Thanks for this Video! I would never have found how to access the water inlet valves. The hard part was to get the wire connectors off without damaging them. My washer would only let a small amount of water in. I replaced the water valve and that fixed it.
Glad I could help!
Is there a trick to getting the wire connectors off without damaging? Mine are STUCK!
Good video right to the point and got it done thanks
Great explanation! Those wires are super hard to disconnect though. Thanks!!
how did you get them to disconnect?
How did you get the terminal disconnected, is their a locking tab ?
You don’t have to reach under and “squeeze those pins” to take the control panel off. You can just slide a putty knife under the corners of the control panel and it will roll rite up.
Another guy used a butter knife which is longer & thinner, worked perfectly!!
Ummm, no you can't. Just tried it on a Maytag Bravos, and it did NOT work.
@@garethhale1672 ummmm just because you couldn’t doesn’t mean it can’t be don’t. I do it probably 5-7 times a month on bravos
@@garethhale1672 push an 1” putty knife straight towards the back about 1/2-1 inch from the end of the panel. It has a fair amount of pressure but as you get it pushed all the way back roll the panel towards the back to get it lose. Then do the same on the other side and it will pop rite off.
@Aaron Fuller Thank you! I didn't mean to come off as a jersey. Just super frustrated and I couldnt get the butter knife trick to work. Got it done with a slender putty knife though.
Fixed my issue! Thank you sir!
Hell ya brother. Just what I needed!
Very helpful. Thank you.
A few months later (if that long) you notice water leaking from the same exact spot. Just a Hint from a 30+ year technician. Add a little O-ring lubricant to the black seals where they go into the water distribution channels. They'll seat easier and prevent having to replace the inlet valve again, lol.
Thank you 🙏 I got it fixed. 😃
Thank you, hope it goes that easy for me.
Thank you buddy. Having the same issues with mine. I noticed a puddle of water on top of my valve. I'm going to order one from Amazon.
Glad to help.
I can’t get past squeezing the pins .
@@clintoncoker4318 Try to get a tool in there if you can.
Thank you for the video! I have the exact same washer however, my water leaks constantly from the inside main pour spout. This is likely the inlet valve too, right?
Had this washer and it’s a piece of crap. Got rid of it and purchased a MVW575GW1 Maytag commercial washer. Best purchase ever.
Helpful indeed
Great video, thanks!
You’re welcome!
Thank you so much bro !
Thank you!
THANK YOU!!! Same exact washer and purchased same year released. Just now experiencing issues. And we have debris as well. Happened After town worked on sewage/ water in front of our home- tore entire road up- seems debris backed into our home! Of course we carry the fix it bills- town can do no wrong! Side note still water issues after the “fix” can you share or suggest where to purchase replacement part? Lots fraudulent places online- thanks in advance.
Thank You I successfully, completed My fill vaule. Yeah I can do My laundry.
Appericate You
thanks dude. I could not figure out how to get the cover off.
No problem
ty helped alot made job easy
Nice Thank you
Thank you❤
Best video ever! We have the exact same washer and had the exact same problem. I got an estimate for $350, then saw this video, bought the part for $53, and did it myself. I'd love to buy you a beer (send you the money) if there's a way to do that - let me know!. PS. The top console didn't clip back down, and it's a little loose now. Does that matter?
Glad I could help. As long as it stays in place and doesn’t slide around during its cycle it should be fine.
Love your video thanks for saving me some $.
Glad I could help.
Thanks for showing us the spring clamps I keep looking but they are hidden behind the hinges.
Thank you.
No problem .
Awesome!!! Super curious does anyone know whereee and how to clean the lint filter?
So helpful
Can not get to the left pin. In video you show the right side and there is a little black box there but it’s not in the way you can still pinch that super easy. On the left side there is something in the way that does let you squeeze the front part. I tried what other comments said about just using a putty/butter knife but that’s not working either. Any other suggestions?
Thanks for the video...needed to replace the inlet valve for my Maytag Bravos XL. Same setup, except the tab you squeeze on the side by the inlet valve is hard to get to. I used a few flat head screw drivers to pinch the tab and pry it up.
Great video, how do you remove the terminal connector, is there a locking tab ? Mines are very tight.
Keep wiggling them side to side and should loosen
How do I get the small wire clamps off of inlet valve
H9w do I replace the filter to this washing machine?
So how did you squeeze the pins..I got my hand in there, but wasn't able to squeeze the pin together
It's been a while since I made the video. I honestly don't remember how I pulled it off. Maybe see if you can get channel locks in there.
I changed the inlet valve and washer started working. Now it seems like something else is wrong. The countdown timer is erratically going down, up, down, up... it's also filling the tub more that normal. Any idea what else I need to do?
Great video. I purchased the water inlet valve and was able to try and replace it. The problem I was having trouble with is that the rubber gaskets seem like they are not fitting in well. They push up further on the piece, so I tried taking them off and putting them in the holes. Then I put the inlet valve on. It pushed one of them in further and when I turned it on, both ways, I got water spurting out. Any suggestions?
Can you replace the gaskets on your new one with the ones from your old one or was that your problem with the old one?
@@stevescoolstuff126 Steve, I am so sorry I forgot to respond back. I took your advice and replaced the old gaskets onto the new piece and it worked. Thank you so much for the advice!
So I have a Maytag Top and it staying stuck on the sensing light when I try to start a load, I was told by a repair guy that I need to replace those Same Valves? ANYBODY have any advice"
I cant get the connectors on the inlet valve off, and im really not trying to wait two weeks for another part, is there a easier way to remove em. It seemed simple in the video
The hoses or wire connectors?
Rookie question here… after turning off the water, is it expected to have a lot of pressure built up? Making me nervous how much water seems to be “spraying” as I loosen!
That’s always a possibility.
Is there any way to take out plastic screen to clean inlet valves or do you HAVE to replace the valve
Idk. I had to replace mine due to leak.
Having problems taking the wire connections off, scared if i get for aggressive i might break them, any tips?
Just keep wiggling them.
Is there anyway to make it fill up quickly ?
like my old washing machine?
Try rinse cycle maybe?
Why DiY when still under Warranty??? were you able to recoop your $31 from maytag???
Bro,,any ideas on the (F7E1) code? Mine when It start not even a minute then stops…few moments later it says the load is done…and the code pops up…
Thats the safety lock. Ours did this we changed the lock out and it was working great again.
Does anyone know how to replace the Thermistor Sensor?
Our washer won't fill with enough water on any setting except deep water wash and it has to be on extra heavy soil. But when we use that setting the agitator won't work correctly. If we use any other setting the agitator works but it won't fill up with enough water.
Would a new inlet valve fix this issue?
I honestly don’t know but read through the rest of the comments and see if anyone else said that fixed it for them
Pls help me find the link to the part. GREAT VIDEO, thanks.
Click the down arrow next to the video description. It’s down there. Then click read more
can u buy just the inlet screens ? or just buy the whole valve
I’m not sure.
Would be a life saver if someone could share next steps for Maytag MVWB766FW1 off balance for any size load but empty.
Replaced suspension rods. Leveled front to back side to side. Checked washer plate and tower for soundnesses which was nice and tight. Nothing in between drum and linear. Performs wash cycle and initial low speed spin to drain tub but as soon as it picks up from there bang bang bang off balance and walks.
At a loss!? 🤷
Maytag commercial technology access to top
Can you give me a tip on how to disconnect the inlet connectors! They are tight and I can't get them loose.
Forget about it! I got them disconnected! They were tough. So if someone else after me has trouble you really need to wiggle them left to right until they losen up!
Oh and sorry about my manners: Thank you very much for doing this video!!
My Maytag Bravos XL will not stop filling up with water. I have to turn off the machine for it to drain all the water. Any idea what is causing the problem? I think it's the main control board possibly or water level switch? 🤔
Wish I could be of some help to you but ive never seen that happen .
@@stevescoolstuff126 okay ty. I will figure it out somehow.
@@rahzvlogs2994 ours is doing the same thing, service guy said it was the water inlet valve. Purchased on Amazon, 34.99. I'm going to try this on our bravos xl and see if it works.
Mine will turn on but then dings and turns off! Any chance you have a repair video for this issue?? Have EXACT same machine! TIA!
Sorry. I have no idea what that could be.
Skillet incenable
I bought mine used a few weeks ago...
Was running ok as far as I know. Today I been testing different cycles and its not filling up at all.
I set it to normal then lihht soil level and it goes back n forth from sensing to wash then eventually goes to done. Any ideas??
Sorry I don’t have an answer for that.
If you bought yours a few weeks ago then you should have warranty
I got the same washer just bought the same part as in the video and for the life of me I can't get them wire Clips off those connectors without feeling like I'm going to break something they don't budge
I guess just keep wiggling them
@@stevescoolstuff126 I got them off all I did was take a flathead screwdriver and pushback from the head of the clip and it popped right off. Currently doing a test run cycle now
Any idea where the water temperature sensor is on this thing ?
Never tried looking for it actually. Wish I could help.
I have the same machine and it does not distribute water at all. Could replacing this same part fix my problem?
I'm not sure but it would be cheap to try.
So my washer is dripping water into the washer filling it up by just dripping little by littlein 2 days of no use it is almost half way full would this bee the same Valve that needs to be replaced?
More than likely
@@stevescoolstuff126 Great! Will start working on it. Thanks
Is there a way to get the wire connectors off without damaging? Mine are STUCK!
@@veronicaloose5868 maybe get some electronic contact spray and see if that will help. Comes in an aerosol can.
Can you share part number? My machine is Maytag commercial mvwb765fw0 Looks EXACTLY like yours. I’m getting “compatible” part numbers and worry it actually may not be. When I look into details my machine model number is NOT listed as compatible. So not sure why it’s coming back as compatible. Given you can still answer this question. Thanks again.
I have the same exact one and problem. Can you tell what part number you used?
There is an Amazon link in the description.
That harness self destructs when you try to remove it, and squeezing the pins is impossible
Great video, but where is the link to the replacement part? I see in the comments you say to click on the down arrow and click read more??? What arrow..
Right next to the title of the video
I got the same washer. Wish I wouldn't of bought it. It constantly gets the lf error, it constantly needs to be unplugged and reset, it constantly gets out of balance. I got a dog and cat and pet fur gets into the gears on the bottom which makes it not spin. I've had to clean the pet fur out of it twice.
anyway to remove the inlet screens?
I dont know , I haven't tried .
I tried after removing the inlet and the filter broke ! Tried it on hot side and tried to be even more careful and busted. They are very fragile.
Mine broke also lol
I got My out it was teadious
My Maytag is model MVW6230HW2 bought in 2022 and installed on March 1. The valve started spewing water from the hot side where the hose attaches to the valve. The plastic was cracked. I ordered a replacement valve, installed it, and then ran a test load. Water was slowly dripping down the back of the washer when it was filling and rinsing. I removed the new valve and discovered that the middle port did not exactly match up with the hole, and the rubber grommet was not doing its job of providing a leak-free connection. I have contacted the seller about the problem. Maybe I'll get a refund. The middle port on my original valve is equal in distance from the two outer ports, but the replacement valve is off center by about a millimeter, maybe less. Now I am waiting for replies as to the spacing of the ports from other brands so I can order a valve that actually fits.
happened to mine like 4 times so far so much for like a 1000 dollar washer
WOW
You think I should order a spare lol
Help! Help! your maytag machine looks just like my 3 yo Maytag with same symptoms. Water enters machine. No agitation. Ten Code F8E1. Then, I spin. Maytag MOD MVW723OHWO SER CX0270587. PLZ send link to piece ordered on Amazon. I can not find. thank you. thank you, thank you! I need to wash my laundry!
Link is in description
I almost never leave reviews.But, I have this washer for a few years now, and I can say that I absolutely hate it!!!!!