Omgosh...thank you so much!! This was such a great learning experience for me. Just got my Brother embroidery machine & I'm totally clueless, but been learning off of CZcams because of everyone's experiences. Again, your advice & tutorial has been a lifesaver & game changer for me. Now, I can cut my time in half!! YES!! Finally!! Been looking around for over a week. Again, thank you so much!!
You are a star ! I have just bought a Brother M280D and couldn't understand why my bobbin thread was coming to the top all the time. This machine has the bobbin tension pre-set and cannot be adjusted (as I was being advised to do on other videos) Thankfully I came across your video and I changed the tension as you explained, from 4 to between the 2 and 3. MAGIC !! Thank you Eve
I SO-O-O needed this video-after stitching out a design almost perfectly, all of a sudden there were tension problems on the second and third attempts. Your tutorial is spot on and fantastic, easy-to-understand info! THANK YOU!
Perfect timing with this video! I just got a Brother SE1900 and I am glad to know what the percentage of showing threads should be on the bottom. My machine works fine according to your tip. Have a great day!
I am very happy that you did NOT give up! These machines are finicky and they like what they like. If the tension is off, there could be several reasons why. Thank you for letting me know the video helped you!
Thank you Jennifer! I try to be sure that everyone can understand the tutorials since it's such a delicate process. I and my contacts lenses thank you!
Thank you so much for this video! I haven't even used a sewing machine before and I bought a Brother PE800 a couple weeks ago. Without knowing anything things have gone pretty well until today when I was stitching the largest image I had worked on to date and ruined two shirts when things went wrong!! Your video helped me to set up my tension properly and finally be able to complete my large stitched graphic properly. Now I actually know what to look for on the back of my embroidery! This video and others you have made have been a huge help!! Thanks for helping a rookie!! Best wishes!!
Woooohoooo! Congrats on your new machine and awesome job sticking with the project and seeing it thru! I appreciate you taking the time to watch our video and leave a comment!
Hi Eve! This is great info. I like this method too b/c it’s foolproof! Sure glad I found you a few years back when I was beginning- your info is always super and spot-on!! Thanks sew much.
Thanks for the information.I just brought my brother embroidery machine so I'm just learning new things. IM definitely going to subscribe and watch all your videos lol
Perfect timing! Just purchased the BrotherXAEA12900-1529-3246a7y2dor5q-11 and i was having what i guessed to be tension issues. Gonna try it on 3 with gold and red. Keep up the good work !
This is fabulous! I had embroidery tension issues, and this helped me solve them. Combining my knowledge of how to check the tension on an adjustable bobbin (and adjust it), this method for upper tension adjustment is the best I’ve seen! Thanks! As it turns out, the upper embroidery tension settings on my machine are digital, nevertheless, your method still works!
Okay - Wow! Thank you! I love you! You are an amazing teacher. I love the way you demonstrated how to adjust top tension on an embroidery machine. Also, I love the way you edited your video with the graphics.
i know im asking randomly but does anybody know a tool to get back into an Instagram account?? I was stupid forgot my password. I would appreciate any help you can give me
@Finn Zayne i really appreciate your reply. I found the site on google and im trying it out now. Looks like it's gonna take a while so I will get back to you later with my results.
Oh no! Don't take the baby back! I'm glad you are giving us a second chance! LOL! Please join the hoop group so that any questions you may have can be answered!
@@Souixno I do. I use Sew What Pro. It is the most affordable yet power packed program out there! It has a 30 day trial on my website www.TheBabysBooty.com
Thank you :) I got an embroidery machine in november and felt like giving up I have been having so many issues! I'll give this a go today and see if it helps :)
I've had to learn my machine and learn each design. I write down the tension that works best for each part of the design on a note pad if I know I'm going to duplicate it a few times. If the design is really layered then my machine will want me to lower at each level. Makes sense. The design finish changes completely when I do this vs just leaving the tension at one place the whole time. Night and day. It's all about finding those sweet spots sometimes 🤷🏽♀️
Thanks so much! I know you had this on another video...of course I wasn't having problems then.😣 I will run this check as I've cleaned out the bobbin case, etc. already. Thanks again for all your great advice!😉👍🏻
Thanks for this video! I had a frustrating day today and now I will do some tests. Have you done videos about different types of fabric and changing the tension?
This was such a good video and explanation. I’m still a bit confused as when I change the tension on my machine, the bobbin thread hardly even shows up on the back despite what setting it’s on 😞
Thank you for your comment and question. If the bobbin thread doesn't show then the top tension is too tight. Lower the number a bit and see if that helps.
Hi, this video really helped me. I use the PE800 and there 2 tension options, one is called “Embroidery tension”, and the other one is just “Tension”. What is the difference between the 2 ?
This video was so helpful! I was wondering why my "machine wouldn't work," but after watching your video I figured it out. Now I know how to test my tension... I used the lower case letter l, what I great idea!! :) Thanks so much! ~Simone
I NEEDED this video thank you!! When embroidering something thicker such as a sweatshirt, would the tension needed change or differ? Im new to this and I keep getting tangles that ruin my project on the bobbin side! im looking for any advice to help!!
I was doing a design on a towel and I forgot to put the water stabiler on top so I stop the machine and put the water stabilizer on top then started the design all over again it went over it twice.thank goodness it didn't come out to bad .but Eve is there a way to go back to restitch once you are half way in to your design ? thank you for your time.ps I did check the tension on my machine today thank you for all your videos.
T here's a sewing on the machine with a needle and a - or + which can be used to go backseat or forwards on your design, if you're thread breaks for example. Always best to check the manual!.. Or CZcams!!
Hi...I have a SE 625 embroidery machine. So Have you ever experience your embroidery machine needle hitting the plate. Misaligned. If so, can you please tell me how you fixed that problem...thanks so much. .
Changing the needle was my first step. If it still hit the plate after changing the needle, then that could mean the needle bar (the shaft that holds the needle) has been bent.
Hello! I have a brother se1900 and my needle keeps breaking. A few times it just fell out. I tighten the needle per the instructions so I’m wondering if the tension is the cause of the problems with my needle. I read the instructions and followed them but I still have the issue of needles breaking or just falling out. Thanks in advance for the help!
Hi I got so much information your video , I want to ask you a question I have so much problem with nesting on back of my embroidery fabric . I have changed needle, rethread bobbin & embroidery top thread . I have cleaned my machine in the below the bobbin case . I have changed the tension to loose and tighten it up . I still have to thread below my fabric. I want to know if you have any more tips please I would appreciate your help. Thank you LB
The tension is there for you to make necessary adjustments for different weights of thread and material. Check your manual to see how to adjust the tension. If the instructions are in there... then you CAN adjust it without worries!
Hi I’m having issues with my pe900 when it’s sewing my shirt starts to get sucked in and when I look under I see that it’s bunched ball of thread which then makes a hole in my shirt please help
Haha! Didn't know about that one. I usually just do whatever tension works, trial and error, now I know that there's supposed to be a good ratio of whatever on the damn thing. Does the tension need to differn depending on the fabric or cloth?
An embroidery machine is just a sewing machine with an automatic arm that holds a hoop. You can adjust the tension similarly. The only difference is the way the stitches lie. Take a moment to Google "sewing machine tension" and find a picture of how your thread should look when sewing so that you will have a guide.
Hello I have a question so I’m trying to do use a htv glitter appliqué and when I stitch this out there’s gaps in my design. but when I don’t use glitter HTV for the appliqué it stitches out perfect. if I use regular vinyl it stitches out perfect so I’m thinking it has to do with the glitter vinyl that I’m using. It might be too thick and it’s causing the tension to go off. ?? ..what do you think? Any advice is appreciated. Thank you so much.
hello my brother innovis 750e lcd says turn off and attach the embroidery unit even when the embroidery unit is attached to the machine. can anyone help me. thank you
Have you tried the 5 quarter bobbin technique? Mr. Vince J.Arcuri on CZcams has a tutorial. :). Another technique for the arsenal. Thank you! I love how neat your room looks. Lovely.
I will definitely check out his 5 quarter bobbin technique. Thank you kindly for sharing it with me and for taking the time to leave a helpful comment!
Thank u but i always got thread problem on my brother sewing machine XL-4030, sometimes can embroider sometimes not and i dont know which numbers should i use☹
If you still have embroidery issues even after trying the method I show here, then your machine may need maintenance. Use this checklist: does it still mess up after changing the needle? Does it still mess up with a new bobbin? Try again after changing your thread to a new spool. Is it messing up only on one particular design? Look down into the bobbin case, is it dirty? These are just a few things you can check to try to fix what may be wrong before taking it to a shop.
Thanks for the video! I love them all. Question about your test fabric, what is it and how have you prepared it for the hoop? Are you using any stabilizers under it?
I have a brother pe525 tried embroidering a design and it was a mess underneath to the point I put a hole in the fabric trying to cut it out by the way I'm trying to embroider fleece the tension was at 1 and 1/2 the bird nurse was so bad in the bottom I had to unscrew the plate and clean ... Any special tips for embroidery fleece? Before I embroidery any design I will try join the letter L or I like you suggested but anything else I should use I use water syllable stabilizer on top and thin stabilizer on the bottom I think I got that part right😅
Hi ma'am. Thank you so much for the very good video and I have a question. Do you change the bobbin thread sometimes.? I have been having trouble with my PE-770, I use #90 and #60 in white all the time and sometimes a lot will show at the top, do I need to adjust the tension .. Thank you much.
Hi really enjoyed your video. I was wondering if you could help me with one of my problems. When I embroid a stock design (or any design for that matter), the tension for the first thread will be fine however after I changed the thread it becomes looser and looser until it jams. Do you know what could be causing this or how to fix it. I have had this machine (Brother PE540D) for two years and never got a full design out of it. PLEASE HELP!
It is not easy to troubleshoot just from a description, but there are several things that can cause issues and you'll need to try them one at a time: 1. change to a new needle. 2. Be sure your top thread is threaded correctly. 3. Be sure your bobbin thread is inserted in the right direction! ( #2 & #3 refer to your manual for directions) 4. Be sure your project is hooped correctly. It needs to be taut and have the proper stabilizer. 5. Try a different spool of thread... that should be listed after #1... Try these things and see if it helps.
@@TheBabysBooty thank you soooo much I'm going to try these options hopefully one or all will work thanks again for getting back to me have a lovely day 😀
I had only theorized that my thread tension was too tight, but this just helped me identify and confirm it. Big help! thanks a lot.
You are very welcome!
Thank you for your videos. I’ve had this machine for at least 3 years. Today I finally got the courage to open it because of you. Thank u 🤗
You're welcome! 🤗 Thank you for letting me know the video was helpful!
Omgosh...thank you so much!! This was such a great learning experience for me. Just got my Brother embroidery machine & I'm totally clueless, but been learning off of CZcams because of everyone's experiences. Again, your advice & tutorial has been a lifesaver & game changer for me. Now, I can cut my time in half!! YES!! Finally!! Been looking around for over a week. Again, thank you so much!!
You are a star ! I have just bought a Brother M280D and couldn't understand why my bobbin thread was coming to the top all the time. This machine has the bobbin tension pre-set and cannot be adjusted (as I was being advised to do on other videos) Thankfully I came across your video and I changed the tension as you explained, from 4 to between the 2 and 3. MAGIC !!
Thank you Eve
Glad I could help! Nothing worse than being frustrated at a project.
I SO-O-O needed this video-after stitching out a design almost perfectly, all of a sudden there were tension problems on the second and third attempts. Your tutorial is spot on and fantastic, easy-to-understand info! THANK YOU!
Perfect timing with this video! I just got a Brother SE1900 and I am glad to know what the percentage of showing threads should be on the bottom. My machine works fine according to your tip. Have a great day!
your videos are so helpful! I was ready to give up!
I am very happy that you did NOT give up! These machines are finicky and they like what they like. If the tension is off, there could be several reasons why. Thank you for letting me know the video helped you!
thank you for making this video! i've come back to it at least 10 times!
You're welcome Jamyn! I am glad to have been helpful to you!
Your tutorials are amazing!!! You explain so clearly! And my goodness do you have the most gorgeous eyes!!!
Thank you Jennifer! I try to be sure that everyone can understand the tutorials since it's such a delicate process. I and my contacts lenses thank you!
Thank you so much for this video! I haven't even used a sewing machine before and I bought a Brother PE800 a couple weeks ago. Without knowing anything things have gone pretty well until today when I was stitching the largest image I had worked on to date and ruined two shirts when things went wrong!! Your video helped me to set up my tension properly and finally be able to complete my large stitched graphic properly. Now I actually know what to look for on the back of my embroidery! This video and others you have made have been a huge help!! Thanks for helping a rookie!! Best wishes!!
Woooohoooo! Congrats on your new machine and awesome job sticking with the project and seeing it thru! I appreciate you taking the time to watch our video and leave a comment!
Omg. Me too. Got a pe 800 everything was lovely now the bobbin is on top and the thread is bottom. It’s totally upside down. I’m so sad
Hi Eve! This is great info. I like this method too b/c it’s foolproof! Sure glad I found you a few years back when I was beginning- your info is always super and spot-on!! Thanks sew much.
Thank you! This is such a straightforward way of looking at it.
You're welcome 😄
Thanks for the information.I just brought my brother embroidery machine so I'm just learning new things. IM definitely going to subscribe and watch all your videos lol
You are so welcome! Thank you for watching our videos.
Thank you so much for this video! I had been searching for hours trying to figure out tension issues, this was fantastic!
Thank you for this clear, easy to follow video! It did not help me solve my woes (yet), but it was a great starting place for me.
Your videos are so well put together. Thank you.
Thank you for watching!
Perfect timing! Just purchased the BrotherXAEA12900-1529-3246a7y2dor5q-11 and i was having what i guessed to be tension issues. Gonna try it on 3 with gold and red. Keep up the good work !
Your videos are terrific! Thank you for sharing with all of us
Thank you, it's the little things that count.
This is fabulous! I had embroidery tension issues, and this helped me solve them. Combining my knowledge of how to check the tension on an adjustable bobbin (and adjust it), this method for upper tension adjustment is the best I’ve seen! Thanks! As it turns out, the upper embroidery tension settings on my machine are digital, nevertheless, your method still works!
Thank you kindly Sharon for the feedback! Tension issues can turn a simple project into a major headache!
Thank You - great video - Palm Springs, Calif-
I appreciate you watching the video and taking the time to leave a comment Sylvia!
TY Eve, I will be back embroidering as soon as I get everything in order in my house.
Okay - Wow! Thank you! I love you! You are an amazing teacher. I love the way you demonstrated how to adjust top tension on an embroidery machine. Also, I love the way you edited your video with the graphics.
i know im asking randomly but does anybody know a tool to get back into an Instagram account??
I was stupid forgot my password. I would appreciate any help you can give me
@Joseph Westin instablaster ;)
@Finn Zayne i really appreciate your reply. I found the site on google and im trying it out now.
Looks like it's gonna take a while so I will get back to you later with my results.
@Finn Zayne it worked and I now got access to my account again. Im so happy:D
Thank you so much you really help me out !
@Joseph Westin you are welcome =)
Thank you so much for this video. I was ready to take my machine back to the store. Be Blessed 💜
Oh no! Don't take the baby back! I'm glad you are giving us a second chance! LOL! Please join the hoop group so that any questions you may have can be answered!
@@TheBabysBooty do you recommend any design software?
@@Souixno I do. I use Sew What Pro. It is the most affordable yet power packed program out there! It has a 30 day trial on my website www.TheBabysBooty.com
Thank you so much. This was exactly the information I was looking for. What a simple and effective method.
Thanks for this will try.
Hi, thanks for the video, you've answered my questions regarding tension, greetings from the UK.
Thank you for the video. Very helpful!
You're welcome my dear!
love your videos so i had to subscribe. You are super easy to understand, Thank you so much
Thank you kindly! 💜
Love Your Information You Are Really Good To Give All Information
Thank you :) I got an embroidery machine in november and felt like giving up I have been having so many issues! I'll give this a go today and see if it helps :)
Keep me updated!
Thanks for this tutorial , I was really getting frustrated with my machine
You are WELCOME! I totally understand!
That was great and totally solved my problem, THANK YOU!
Glad it helped! Tension is such a tricky subject, so I am glad you got it resolved.
Hard to see with 2 dark colors. Wish it could be done in white and black?
Thank you, that helped a lot.
Glad it helped!
Thank you so much, solved my issues!
Yaaaas! Thats what I like to hear! Happy Embroidering!
I really loved this video.....thanks so much!
I've had to learn my machine and learn each design. I write down the tension that works best for each part of the design on a note pad if I know I'm going to duplicate it a few times. If the design is really layered then my machine will want me to lower at each level. Makes sense. The design finish changes completely when I do this vs just leaving the tension at one place the whole time. Night and day. It's all about finding those sweet spots sometimes 🤷🏽♀️
Good video thanks
I agree!! Ty!!
This is so helpful. Thank you!!
Thanks so much! I know you had this on another video...of course I wasn't having problems then.😣 I will run this check as I've cleaned out the bobbin case, etc. already. Thanks again for all your great advice!😉👍🏻
Thank you
Hi. I just found you! Great video.
You helped me so much. Thank yiu
Thank you so much! This video was extremely helpful.
Glad it was helpful!
Great job thank you so much
You are very welcome! Thank you for watching our video.
Thank You Very Mach .!!! You the best !!!
🤗 Thank you! I am happy to have been of help!
Thanks Eve, just found this video.
Thank you Eve!
Love it, thanks for the video...!!! 😊
Thanks for this video! I had a frustrating day today and now I will do some tests. Have you done videos about different types of fabric and changing the tension?
I haven't when it comes to different fabrics! I'll have to keep that in mind!
🙋♀️
Awesome tutorial! Thank you!!
Really Great Video Thanks
🙏🏾😁Tku so much 🌹
You're welcome my dear! 🤗
thanks
Lifesaver! This is a great video!
Thank you!🙂
Thank you! This helped me a lot. :)
This was an awesome video!!!!! THANK YOU so much!!!!! :)
Oh and I'd like to add that you're a very pretty lady and it was very easy to understand you.
Thank you! Just what I needed to know.
Thank you excellent!
This was so helpful thank you for sharing :)
Thank you! You’re the best!
This was such a good video and explanation. I’m still a bit confused as when I change the tension on my machine, the bobbin thread hardly even shows up on the back despite what setting it’s on 😞
Thank you for your comment and question. If the bobbin thread doesn't show then the top tension is too tight. Lower the number a bit and see if that helps.
Hi, this video really helped me. I use the PE800 and there 2 tension options, one is called “Embroidery tension”, and the other one is just “Tension”. What is the difference between the 2 ?
This video was so helpful! I was wondering why my "machine wouldn't work," but after watching your video I figured it out. Now I know how to test my tension... I used the lower case letter l, what I great idea!! :) Thanks so much!
~Simone
You're welcome! 🤗 Happy embroidering!
I NEEDED this video thank you!! When embroidering something thicker such as a sweatshirt, would the tension needed change or differ? Im new to this and I keep getting tangles that ruin my project on the bobbin side! im looking for any advice to help!!
This is great video,Thanks for sharing,I do have a questions do lettering and is there away that i can make my stick thicker
Thank you for this video! I have a quotation, does the tension need to be changed for different fabrics or bobbins.
Great tutorial! Thank you!! :-)
Ive been reading the opposite, 2/3 of top thread should be showing on the bottom side and only 1/3 should show on bottom?
Thank You!!!
I was doing a design on a towel and I forgot to put the water stabiler on top so I stop the machine and put the water stabilizer on top then started the design all over again it went over it twice.thank goodness it didn't come out to bad .but Eve is there a way to go back to restitch once you are half way in to your design ? thank you for your time.ps I did check the tension on my machine today thank you for all your videos.
T here's a sewing on the machine with a needle and a - or + which can be used to go backseat or forwards on your design, if you're thread breaks for example. Always best to check the manual!.. Or CZcams!!
Hi...I have a SE 625 embroidery machine. So Have you ever experience your embroidery machine needle hitting the plate. Misaligned. If so, can you please tell me how you fixed that problem...thanks so much. .
Changing the needle was my first step. If it still hit the plate after changing the needle, then that could mean the needle bar (the shaft that holds the needle) has been bent.
The last step on my design is an outline of the design ,but the outline is about a quarter of an inch off of the design
Outlines are beautiful but it doesn't take much for them to be off. It could be a stabilizer issue, or a hooping issue.
Hello! I have a brother se1900 and my needle keeps breaking. A few times it just fell out. I tighten the needle per the instructions so I’m wondering if the tension is the cause of the problems with my needle. I read the instructions and followed them but I still have the issue of needles breaking or just falling out. Thanks in advance for the help!
I would definitely get it checked out, that's not good.
Hi I got so much information your video , I want to ask you a question I have so much problem with nesting on back of my embroidery fabric . I have changed needle, rethread bobbin & embroidery top thread . I have cleaned my machine in the below the bobbin case . I have changed the tension to loose and tighten it up . I still have to thread below my fabric. I want to know if you have any more tips please I would appreciate your help. Thank you LB
I was always told not to mess with the tension? I have a pe800 and my top thread is not showing at all underneath what should I do?
The tension is there for you to make necessary adjustments for different weights of thread and material. Check your manual to see how to adjust the tension. If the instructions are in there... then you CAN adjust it without worries!
Hi I’m having issues with my pe900 when it’s sewing my shirt starts to get sucked in and when I look under I see that it’s bunched ball of thread which then makes a hole in my shirt please help
Haha! Didn't know about that one. I usually just do whatever tension works, trial and error, now I know that there's supposed to be a good ratio of whatever on the damn thing. Does the tension need to differn depending on the fabric or cloth?
Just the right video, at just the right moment!
Is adjusting the lower bobbin tension the same when it's being used for regular sewing?
An embroidery machine is just a sewing machine with an automatic arm that holds a hoop. You can adjust the tension similarly. The only difference is the way the stitches lie. Take a moment to Google "sewing machine tension" and find a picture of how your thread should look when sewing so that you will have a guide.
Hello I have a question so I’m trying to do use a htv glitter appliqué and when I stitch this out there’s gaps in my design. but when I don’t use glitter HTV for the appliqué it stitches out perfect. if I use regular vinyl it stitches out perfect so I’m thinking it has to do with the glitter vinyl that I’m using. It might be too thick and it’s causing the tension to go off. ?? ..what do you think? Any advice is appreciated. Thank you so much.
can you use reg.thread for the bobbin ?.
You can! It seems to have less issues with 60wt thread, but you are able to use 40wt.
I have an innovis 750e and just in the past day or so the needle is juddering and stops - what is wrong please can you help!
hello my brother innovis 750e lcd says turn off and attach the embroidery unit even when the embroidery unit is attached to the machine. can anyone help me. thank you
Whats thr name of the piece you got on there for the nozzle cause i bought a brother machine but i lost the pouch with the pieces that come in it
Have you tried the 5 quarter bobbin technique? Mr. Vince J.Arcuri on CZcams has a tutorial. :). Another technique for the arsenal. Thank you! I love how neat your room looks. Lovely.
He has the pe800 and se1900. In not sure what else. Oh and I love the I idea and you reasoning behind it. Thanks for sharing your thought process!
I will definitely check out his 5 quarter bobbin technique. Thank you kindly for sharing it with me and for taking the time to leave a helpful comment!
I have a question. Why is there different tension settings? If it screws up on all others they why?
Jen's Life same thing I’m thinking
Thank u but i always got thread problem on my brother sewing machine XL-4030, sometimes can embroider sometimes not and i dont know which numbers should i use☹
If you still have embroidery issues even after trying the method I show here, then your machine may need maintenance. Use this checklist: does it still mess up after changing the needle? Does it still mess up with a new bobbin? Try again after changing your thread to a new spool. Is it messing up only on one particular design? Look down into the bobbin case, is it dirty? These are just a few things you can check to try to fix what may be wrong before taking it to a shop.
Thanks for the video! I love them all. Question about your test fabric, what is it and how have you prepared it for the hoop? Are you using any stabilizers under it?
The problem that I am having with my new brother NS2750 is the underneath looks better that the top of the design. Any suggestions?
I have a brother pe525 tried embroidering a design and it was a mess underneath to the point I put a hole in the fabric trying to cut it out by the way I'm trying to embroider fleece the tension was at 1 and 1/2 the bird nurse was so bad in the bottom I had to unscrew the plate and clean ... Any special tips for embroidery fleece? Before I embroidery any design I will try join the letter L or I like you suggested but anything else I should use I use water syllable stabilizer on top and thin stabilizer on the bottom I think I got that part right😅
This is very helpful!! Thank you!!
What is the size of the needle you use .. Also how to avoid the problems of sewing and hanging cloth?
Hi ma'am. Thank you so much for the very good video and I have a question. Do you change the bobbin thread sometimes.? I have been having trouble with my PE-770, I use #90 and #60 in white all the time and sometimes a lot will show at the top, do I need to adjust the tension .. Thank you much.
Hi really enjoyed your video. I was wondering if you could help me with one of my problems. When I embroid a stock design (or any design for that matter), the tension for the first thread will be fine however after I changed the thread it becomes looser and looser until it jams. Do you know what could be causing this or how to fix it. I have had this machine (Brother PE540D) for two years and never got a full design out of it. PLEASE HELP!
It is not easy to troubleshoot just from a description, but there are several things that can cause issues and you'll need to try them one at a time: 1. change to a new needle. 2. Be sure your top thread is threaded correctly. 3. Be sure your bobbin thread is inserted in the right direction! ( #2 & #3 refer to your manual for directions) 4. Be sure your project is hooped correctly. It needs to be taut and have the proper stabilizer. 5. Try a different spool of thread... that should be listed after #1... Try these things and see if it helps.
@@TheBabysBooty thank you soooo much I'm going to try these options hopefully one or all will work thanks again for getting back to me have a lovely day 😀
I have the same machine and I quitting what number you set the top to ?
perfect i will text tonight my info, thank you so much