Modern Contemporary Wave Platform Bed Review and Assembly - As seen on Amazon & Ebay Futuristic Bed

Sdílet
Vložit
  • čas přidán 27. 07. 2024
  • Modern Contemporary Wave-like Curve Upholstered Platform Bed with Headboard Product Review and assembly. Futuristic bed as seen on Amazon and Ebay.
    In this video I will share with you my honest review on this super exciting futuristic bed. This bed is easily found on the internet. It is made of faux leather and has a very sexy curvy modern design. Perfect for a contemporary bedroom decor. A few people have asked if this bed is low to the ground. The answer is yes, it is quite low to the ground and may be uncomfortable for a tall person to get out of the bed. This is an honest unsponsored review and opinion of the product. We will also show a sneak peak of how we assembled the bed.
    Thanks for visiting Arbitrarily Me. Hope you enjoy the video! If you have any questions please do not hesitate to ask in the comment section.
    See you at the next video!
    Donations to help grow this channel:
    www.buymeacoffee.com/toystationp
    I am participating in the Walmart affiliate program to help grow my channel. I earn a small commission when viewers purchase items through my links.
    Bed available at Walmart:
    goto.walmart.com/c/3973652/12...
    I am participating in the Amazon affiliate program to help grow my channel. I earn a small commission when viewers purchase items through my links.
    Bed available on Amazon:
    amzn.to/409EdsW
    Business email: Toystation151@gmail.com
    #modernbed #futuristicbed #moderndecor #contemporarybedroom #bedreview
  • Jak na to + styl

Komentáře • 117

  • @quoctrung6106
    @quoctrung6106 Před 11 měsíci +73

    I used the rocker prior to baby delivery when I was up in the middle of the night due to heartburn and loved it! Little one is now 6 days old and loves the rocker czcams.com/users/postUgkxXH3jIpsn6vpr3D26KWAriUejh7CSxVp7 , she gets great sleep when used. I had a 1st degree tear repair so sitting can be very uncomfortable and down right painful when the rx mortin wears off, however even then the rocker is firm enough for support but soft enough to feel comfortable. I'm 4'9" so I fit in the chair easily and my 6"3' friend also can sit comfortably in it with a little one. 💖 I would definitely recommend this rocker as a must have for any parent to be👍

  • @chenzenzo
    @chenzenzo Před rokem +1

    I honestly didn't expect to like this video, especially after you mentioned handymen were going to assemble it, but I immediately saw you getting in there and doing it with you family. I'm gonna do it by myself but I'm happy to see it's not so hard. Thanks for the walk through and tips! ❤️

  • @Millionaireeve8538
    @Millionaireeve8538 Před 2 lety +3

    I purchased this bed on Amazon for my 11 year old son. Thank you, very informative video.

    • @yulesavage7441
      @yulesavage7441 Před 2 lety +1

      Is the mattress and bed sold separately??

    • @Millionaireeve8538
      @Millionaireeve8538 Před 2 lety

      @@yulesavage7441 i purchased the mattress from an actual shop and I purchased the frame from Amazon

  • @annaking1375
    @annaking1375 Před 3 lety +5

    Love it, thank you for showing us how to put it together

    • @misteryudonnome
      @misteryudonnome Před 2 lety +1

      That's why I came here. Had the sides together now I can't find the instructions! 😬🤞

  • @ZeeButterfly
    @ZeeButterfly Před 3 lety +12

    I watched this video and you convinced me to purchase mine. I hope I like it!

  • @faithwalk.
    @faithwalk. Před 2 lety +2

    I want this. Had it on my cart for about 3weeks

  • @ModernBeastx1
    @ModernBeastx1 Před rokem +1

    I was wondering about it. Thanks for the vid!

  • @av98
    @av98 Před 2 lety

    Nice review.
    Thank you

  • @IslandKai_
    @IslandKai_ Před rokem +1

    This is actually the best review on a product ever on CZcams!!🙌🏾🔥❤️

  • @ariellopez4338
    @ariellopez4338 Před 2 lety

    Thanks Guys! I wouldn't be able to put it together without this video

  • @DF-dd5nf
    @DF-dd5nf Před rokem

    Thank you for your kind explanation

  • @AJAJ-tg5ym
    @AJAJ-tg5ym Před 2 lety

    Love your bubbly personality...

  • @carlbrooks90
    @carlbrooks90 Před 2 lety +1

    Damn I need bed frame after my jersey flat started breaking down and I came across these on the web.

  • @beckyaviles4173
    @beckyaviles4173 Před 2 lety +1

    Thanks I wanted to know about the back rest and with your explanation. I will order mines today!

  • @pooploop3509
    @pooploop3509 Před rokem +1

    Low cost product that works well.

  • @dee1380
    @dee1380 Před 3 lety +1

    This bed is too cool..
    Lookin at snatchin one & addin a metal bed frame under it with a skirt to match the color to raise it up.
    Strugglin 2 visualize if it would look right or not..
    Like most, I love it, but it's very low..
    I'll take my chances..

    • @arbitrarilyme239
      @arbitrarilyme239  Před 3 lety +1

      I like the bed but you're right, it is very low. However, I like your idea.

  • @Samy-hf5wu
    @Samy-hf5wu Před 3 lety +2

    Just ordered this can I ask what size mattress did you buy and did you get a box spring ?

    • @arbitrarilyme239
      @arbitrarilyme239  Před 3 lety +2

      I ordered the queen size bed so we went ahead and used our queen size mattress. This type of bed does not require a box spring. Actually, a box spring won’t fit. You’re only able to use a mattress. Hope you love your bed! 😃

  • @jessicabanuelos6620
    @jessicabanuelos6620 Před 3 lety +2

    Hi i just saw your video and i had a quick question. You mentioned it was comfortable with your mattress. I was wondering what kind of mattress do you have.

  • @JustinStewartMusic
    @JustinStewartMusic Před 2 lety

    Hey, when you made this bed, where the screw holes for the feet there, or did you have to create the holes by just twisting the screws into the fabric?

    • @arbitrarilyme239
      @arbitrarilyme239  Před 2 lety +2

      Hi, I want to say the holes were there. However, there were other areas that you literally had to take a box cutter and make your own holes in the fabric to get the screws in. Hope this makes sense.

    • @JustinStewartMusic
      @JustinStewartMusic Před 2 lety +1

      @@arbitrarilyme239 thank you, I figured it out. Such a quick response 🤣🤣

  • @burntxtoastt
    @burntxtoastt Před 3 lety +3

    I’m buying the one with the led from Amazon, I like my bed close to the floor

    • @arbitrarilyme239
      @arbitrarilyme239  Před 3 lety +2

      Nice! I like that one as well.

    • @alejandroplasencia9902
      @alejandroplasencia9902 Před 3 lety

      I have a mattress foundation and a queen mattress you think it will fit in this bedframe?

    • @arbitrarilyme239
      @arbitrarilyme239  Před 3 lety

      @@alejandroplasencia9902 If you use the box spring the mattress will not fit.

  • @melasiareynolds9749
    @melasiareynolds9749 Před 2 lety

    I literally have the same bed . Got it as a gift a few days ago . Not sure why but it seems as if the wood pieces are not long enough to meet fully across . As we sleep we have to hear the wooden pieces giving out and dropping to the floor . By morning time my mattress is sinking into the floor . Is it possible they gave me pieces that’s too small ?

    • @arbitrarilyme239
      @arbitrarilyme239  Před 2 lety

      Oh no, that’s awful! When you assembled the bed did you use the plastic connector pieces that attach to the wooden pieces? If so, than I think you’re probably right. Sounds like the pieces may have been too small. I would contact the company it was purchased from. Best of luck.

  • @davidpush7857
    @davidpush7857 Před 2 lety

    Do u suggest furniture risers?? The bed is very low to the ground

    • @arbitrarilyme239
      @arbitrarilyme239  Před 2 lety

      I agree, it is very low to the ground. If you’re short it’s not too big of a deal. However, if you’re tall it would become annoying. Risers may help, though it probably wouldn’t look good. That’s one of the features that makes the bed look interesting, that it is low to the ground.

  • @jaysonpatricio
    @jaysonpatricio Před 3 lety

    Hi, what do you think if I use an 8” mattress for this bed frame?

  • @fredjacob5656
    @fredjacob5656 Před rokem

    Lovely, how much am from Nigeria

  • @zekeriahjames1
    @zekeriahjames1 Před 2 lety +1

    What size mattress did you use like a 10in 8in

  • @karawegner7153
    @karawegner7153 Před 3 lety

    I would like to see how tall the bed is with you next to it...everyone says its really short. what are the measurements from the floor to the top of the mattress?

    • @arbitrarilyme239
      @arbitrarilyme239  Před 3 lety +1

      It is really short. From the floor to the bottom of the mattress is only 5". Then add a 10" mattress and it is only approx 15" from the ground.

    • @karawegner7153
      @karawegner7153 Před 3 lety +1

      @@arbitrarilyme239 Thank you!

  • @omarparra360
    @omarparra360 Před 2 lety

    Would tia work with andjustable bed frame

  • @jrmjay9478
    @jrmjay9478 Před 2 lety +1

    Can the height be adjusted Nd be a bit higher?

  • @KiinoM
    @KiinoM Před 2 lety

    Would it work with a box spring

  • @codylust8894
    @codylust8894 Před 3 lety

    Looking at purchasing this bed, anyone have a link? Thanks! 🙏

    • @arbitrarilyme239
      @arbitrarilyme239  Před 3 lety

      Here's a link to the exact one I purchased. Unfortunately, it's no longer offering free shipping. ☹️
      www.amazon.com/gp/product/B08GNGFMDV/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

  • @EidanTheFool
    @EidanTheFool Před rokem

    How much time did it take to assemble? Can it be done by just one person? Thanks!

    • @arbitrarilyme239
      @arbitrarilyme239  Před rokem

      I don’t remember exactly how long it took to assemble but it wasn’t endless hours. I would think that one person could assemble it on their own.

  • @kaylah_baylah4549
    @kaylah_baylah4549 Před 2 lety +1

    What size mattress would you get?

    • @arbitrarilyme239
      @arbitrarilyme239  Před 2 lety

      I bought a queen. However, they sell the bed in different sizes.

  • @vinianarana9311
    @vinianarana9311 Před 2 lety

    Hahaha you are a good seller even though you don’t work for them

  • @kelm8511
    @kelm8511 Před 2 lety

    trying to buy a bed frame on this but the reviews are giving me mixed feelings, could you give me an update on how the bed is going ?

    • @arbitrarilyme239
      @arbitrarilyme239  Před 2 lety

      Sure, the bed is still going strong. It's still in great condition and sturdy. The only thing that might be a con for me is that the bed is very low to the ground. It looks cool, but if you are very tall it wont be comfortable getting in and out of bed. Hope this helps.

  • @kyliebaeza213
    @kyliebaeza213 Před 2 lety +1

    Did the mattress come with it

  • @LifesAHandful
    @LifesAHandful Před 3 lety +1

    It’s so low any tips I making it higher

    • @arbitrarilyme239
      @arbitrarilyme239  Před 3 lety

      I agree, it is very low. I'm not sure how to make it higher.

  • @007axeHAWK
    @007axeHAWK Před 3 lety +1

    Curious about the height?? Worried it might be too low for a pregnant mom trying to get out of....

    • @arbitrarilyme239
      @arbitrarilyme239  Před 3 lety +1

      Definitely too low for a pregnant woman. I'll measure it for you and post it.

    • @arbitrarilyme239
      @arbitrarilyme239  Před 3 lety +1

      approx 1 foot to the top of the mattress

  • @kittysdaughter2071
    @kittysdaughter2071 Před 2 lety

    I got this . What I don't have is the slates it was supposed to come with😭

    • @arbitrarilyme239
      @arbitrarilyme239  Před 2 lety

      Oh no! You definitely need the slates. Contact the company. Good luck.

  • @maximuselgrande1513
    @maximuselgrande1513 Před 2 lety

    It’s the led lights including?

  • @Niceand456
    @Niceand456 Před 3 lety +2

    It looks smaller than a queen honestly 😬

  • @rachellereid4037
    @rachellereid4037 Před 2 lety

    How tall is it? Is it crazy low to the ground?

    • @arbitrarilyme239
      @arbitrarilyme239  Před 2 lety

      It is really short. From the floor to the bottom of the mattress is only 5". Then add a 10" mattress and it is only approx 15" from the ground.

  • @Onlyubers
    @Onlyubers Před 2 lety +3

    Bought this same style of Amazon about 2 money's ago now from a company called KEALIVE, before I put the mattress on it the wood holding the leg fell apart and was sitting on the floor, messaged them got no reply to this day, "fixed" it with a ratchet strap (temporary) missing BOTH of the nuts for the center support on the footboard filled with wood glue and nuts, 2 days ago while I was asleep the 3 center support legs completely gave out and slammed the bed to the ground

    • @arbitrarilyme239
      @arbitrarilyme239  Před 2 lety

      That's awful. I'd try to contact my credit card company. Maybe they can help if you dispute.

    • @Onlyubers
      @Onlyubers Před 2 lety +1

      @@arbitrarilyme239 yea it's worth looking into, I'm just so mad about it right now

  • @megvsmegan
    @megvsmegan Před 2 lety

    Does the headboard actually adjust as advertised?

  • @tonteel8701
    @tonteel8701 Před rokem

    I ordered this and it didn't come with a manual.

  • @aronsanmattel8880
    @aronsanmattel8880 Před 2 lety

    What size mattress did you use for it? I ordered a 12in but I feel like it’s a little high

  • @swettyspaghtti
    @swettyspaghtti Před 2 lety

    lol your supposed to put the bit in a drill 🤣

  • @jillbrooke5682
    @jillbrooke5682 Před 3 lety

    So it’s never mentioned just not any thickness queen size mattress will fit. If the mattress is too thick the headboard will not stay in the brackets on the sleigh sides then you are posed with a problem of trying to figure out how to attach the headboard without using the arms to slide it into. So for anyone buying said bed check what specifications of mattress you need. Mine said 10 inches thick and I had already bought a 12 inch thick and have run into this problem. Not sure if I attach a piece of pegboard along the back and attach the headboard to the pegboard if maybe it can hold it. 🤷🏻‍♀️ idk I really don’t know what to do. That’s how I found your video looking for an answer or suggestions. I refuse to buy another mattress.

    • @jaysonpatricio
      @jaysonpatricio Před 3 lety

      Hi jill im planning to buy this kind of bed frame but i only have 8” mattress what do you think?

    • @arbitrarilyme239
      @arbitrarilyme239  Před 2 lety +1

      Okay, I see what you mean. You're right, they should not suggest a 12" mattress because honestly it could be too big for the bed. I am currently using a 10" mattress and it fits perfectly. Is there any way you can just squish the mattress down and under the headboard to make it fit? Perhaps when placing the mattress start with the headboard side first, slide it under the headboard then let it lay flat?

    • @arbitrarilyme239
      @arbitrarilyme239  Před 2 lety +1

      I think the 8" will probably work, it will just be a couple inches sunken in.

  • @emilysossoman8728
    @emilysossoman8728 Před 2 lety

    I’m just so scared it will be too short

  • @On-siteGDR
    @On-siteGDR Před rokem

    How would you get a fully assembled bed into the house LOL

  • @josephacevedo5747
    @josephacevedo5747 Před 2 lety

    How did you manage to put the stands on perfectly

  • @zachkraz
    @zachkraz Před 2 lety

    can someone link this

    • @unknownnugget8956
      @unknownnugget8956 Před 2 lety +1

      no because youtube deletes comments with links. it's on wayfair tho. look up karr upholstered low profile platform bed by orren ellis

  • @kolby8858
    @kolby8858 Před rokem

    I purchased this and it came with no screwssssssss

  • @alexpolicarpo4344
    @alexpolicarpo4344 Před 2 lety

    Show us tje bet lol

  • @moniquekenney4787
    @moniquekenney4787 Před 2 lety

    Its not true to the size that it looks the headboard part is very low

  • @mash7062
    @mash7062 Před 2 lety

    bruh the bedframe belenner