Video není dostupné.
Omlouváme se.
How to install a water pump on the Step2 Rain Showers Splash Pond Water Table
Vložit
- čas přidán 13. 06. 2023
- Hello and Welcome to my channel everyone. Today I will show you how to install a pump on the Step2 Rain Showers Splash Pond Water Table.
Not Sponsored.
Affiliate link:
BOYISEN Battery Operated Liquid Transfer Pump (Amazon):
amzn.to/3NcDYHM
Step2 Rain Showers Splash Pond Water Table (Amazon):
amzn.to/463bd9f
🙏 I added a 2 way pvc plastic with some plastic clips and made it fall over the sides into the buckets as well thanks for the video.
you are welcome 🙂
Mechanically inclined 🎉🎉🎉
Thank you 😀
Just what I was looking for. Thanks so much. My two year old grandaughter couldnt reach the top, so I have to always be there to get the water flowing. This will work. My step 2 has a small resevoir on each side of the main one on top.I have to get water to those also. Will have to figure something out. If I try to divide pump hose into three lines, it may be too bulky or just not enough pressure. Thanks so much!
you are welcome. 🙂
Brilliant 🧠 ✨
Thank you 😀
I tired this but after a few minutes my pump just stops. There’s water in the hose but it essentially stalls. Have you had that issue? I have the same pump as you
@@sarahnordstrom4310 Hello and yes, I have had this issue. Try to add more water, or put the pump a little more down, to where it touches the water more. That way it can circulate it, if not it stops. I had to push my pump down more in order for this issue to resolve. Hope it works
Thanks for the video. How long do you get out of the batteries ? If thanks again !
You are welcome, and it depends what brand battery you get and how long you leave it on for. It usually last a couple weeks.