why would you thumbs down this? anybody that did is super young and not a mechanic. This boring race prep can cause you to win the race or DNF. respect and recognize!!!! 😃
if u can't figure out where the bolt is u prob shouldn't be working on the bike anyway the guys that make these videos assume people have the most important tool in ur toolbox and thats common sense..
+MotocrossFan131 they get new bikes aswel lol if one gets trashed during a race the cost of pro racing spare parts including aftermarket parts cost thausands plus thats during practice let alone racing practice rebuild race rebuild practice race and do the same over again
look you people think james stewart is the fastest guy out there because of his fancy one off works components?? you think its because of his unmatched skill?? No, its not, its because he got the tightest damn bolts on the track, and thats a fact, jack. hes out there burnin the dirt up with 150ft lbs on every last bolt.even the gas cap
@hardon4babes always take your seat off. make sure you also take out your air filter and clean it wile your at it. just make sure the intake is water tightend and then wash. doing it like that helps get mud out of alot of easy to miss spots when you leave your seat on and it also keeps your seat nice and new
This is the second video I have watched from this group, and I gotta say, I love how they tell you how important it is to check or do something and NOT show you what the FUCK they are talking about! Just because some of us know what they might be talking about, clarification would be FUCKING NICE! Hell, what about the new cats that have no idea where or what a grounding point is or looks like?! I appreciate the thought of the vid tho...
I'm thinking of doing my bike like this. I've got a 2005 Honda CRF450R and I'm goign to buy brand new Acerbis plastics for it and do the Lucas Oil graphics
Hey twmx or anyone that can help. I did what it said a tightened everything. Now when I put the bike in gear it takes a lot of effort to make it roll. I tried to loosen what I tightened and it didn't help. What should I do. Bike is a Crf150r if that helps
Hey guys I'm 13 riding a Honda cr125r 2001 (2 stroke). It's my first time riding I'm going on it this week do you think it would be a good bike for me? Plus I can't find any graphics I was wondering if you could send me a link to some or even yours. Thanks hope you reply
KTM are known for having default factory issues. I know a guy who bought a 2012 and he could never get it started and it turned out the bike was pinching the fuel line from the tank.
You forgot one of the most critical points of safety for a rider. Spokes dude. Check your spokes. Anyone's seen what happens when you blow up a rip on a 100ft jump? All bad things. Check your spokes.
Sure there is more than just tightening bolts to get a bike ready. But how often do you see goons in practice or races where their fenders, numberplates, shrouds falling off during the ride... LOLOL TOO OFTEN
Woopdee a peice of plastic falls off! Shit ive been to races where people ride so hard that their basically riding on a frame, sub-frame, two-wheels, and an engine! Hey guys dont forget to TORQUE your plastics they might not be .3475738382983 pressure on the plastic IT MIGHT CRACK!
To save you all 7 minutes of your time. TIGHTEN EVERYTHING!!
Matt R 😂😂😂😂😂 i know
2:18 those foot pegs!!! Holy Christ!!!
Ouch
why would you thumbs down this? anybody that did is super young and not a mechanic. This boring race prep can cause you to win the race or DNF. respect and recognize!!!! 😃
"here is a crucial bolt you really need to check"
*doesnt show the bolt*
if u can't figure out where the bolt is u prob shouldn't be working on the bike anyway the guys that make these videos assume people have the most important tool in ur toolbox and thats common sense..
what is even the point of showing how to tighten the nuts and bolts. its like 1/16 of what goes into race prep./
Slurm its highly addictive Motor mounts lol
So much for a race prep. Just teaches us how he tightens his bolts.
"Here's a crucial one..." - doesn't do a close up, nice haha.
Should have been a tutorial on how to make sure your bolts are tight...
😂😂😂😂
Awesome information thank you very much. Great show.
I was gunna change my oil but i think ill just tighten my bolts and ride
how i prep my bike.. fuel, check, chain, check. air filter, check. starts, check.
Amen to that.
+Veith51 LOCTITE IS YOUR BEST FRIEND FUCKING USE IT saves time during prep
gas in the tank oil on the chain gas in the tank oli on the chain
Great Video, I followed this video step by step with my bike, and now my bike feels much more nimble and snappier thanks.
How you making out now?
That bike is wicked
how is that bike so fucking clean not even a scratch
Racers get new plastics and graphics like every race haha, lucky bastards
the life haha
+MotocrossFan131 they get new bikes aswel lol if one gets trashed during a race the cost of pro racing spare parts including aftermarket parts cost thausands plus thats during practice let alone racing practice rebuild race rebuild practice race and do the same over again
I like the intro music!!!
that bicycle is gorgeous
I want this bike!
look you people think james stewart is the fastest guy out there because of his fancy one off works components?? you think its because of his unmatched skill?? No, its not, its because he got the tightest damn bolts on the track, and thats a fact, jack. hes out there burnin the dirt up with 150ft lbs on every last bolt.even the gas cap
Definitely want to remember to check spokes, I’m sure they do it, just forgot to mention it
travis has a nice set up on his bike.
I like how the bike has bolts holding the plastic on, not crappy Philips head screws.
honda for life
@hardon4babes always take your seat off. make sure you also take out your air filter and clean it wile your at it. just make sure the intake is water tightend and then wash. doing it like that helps get mud out of alot of easy to miss spots when you leave your seat on and it also keeps your seat nice and new
That's cool
damn i know they love their job
where do u get all your tools and tool boxes ?
where can i get some tools and a big tool trolley thats not expensive ?
it's the rider
KONY2012, Support it TWMX!
This is the second video I have watched from this group, and I gotta say, I love how they tell you how important it is to check or do something and NOT show you what the FUCK they are talking about! Just because some of us know what they might be talking about, clarification would be FUCKING NICE! Hell, what about the new cats that have no idea where or what a grounding point is or looks like?! I appreciate the thought of the vid tho...
Should I do this on my ttr 50?
Wolf Wolf don't race your 50 if I was you get a 450
Half the video is him checking 8mm bolts. Coulda just said it and moved on
I'm thinking of doing my bike like this. I've got a 2005 Honda CRF450R and I'm goign to buy brand new Acerbis plastics for it and do the Lucas Oil graphics
Honda - Reliable
Kawasaki - Speed
Suzuki - Agility
Yamaha - Durable
is the hotshot device only on one of the sides of the forks
+klx110rider huff Yep
TLD Honda has the best looking bikes on the track.
that dirtbike is sexi !!
Hahahaha! Tighten bolts - check. Ok, let's go racing!
on a honda youd need a 8 and a 10 and youd have 80% of the bolts on that bike covered
whats the song this starts out with ive heard it before and its pissing me off
Lil late but... Aesop rock/none shall pass
Hey twmx or anyone that can help. I did what it said a tightened everything. Now when I put the bike in gear it takes a lot of effort to make it roll. I tried to loosen what I tightened and it didn't help. What should I do. Bike is a Crf150r if that helps
I looked it up and it sounds like it is a sticky clutch and had nothing to do with tightening things down. The next question is how do I fix it
Jake Dodge it's not meant to roll in gear ?
Brayden Walker sorry. I figured out that it had a sticky clitch
you not checking chain slack spoket wear ... cleaning and oiling air filter , sag ect.... wtf i would never let you prep my bike !
could you do a how to wash your bike properly one, my dad doesn't think its necessary to take the seat off... and i know it ruins the foam.
i usely youse a big to medium hammer to go thrue the bike with.
If nothing falls of im god to go..
Hey guys I'm 13 riding a Honda cr125r 2001 (2 stroke). It's my first time riding I'm going on it this week do you think it would be a good bike for me? Plus I can't find any graphics I was wondering if you could send me a link to some or even yours. Thanks hope you reply
I think the bike needs more sponsor decals on it.
Did he mention spokes ??
Yamaha fastttt
And shifter bolt, mine fell of in a race today lol
KTM - Power, speed, agility, not so reliable but enough and durable it is if it just gets its right maintence.
don't forget about your spokes!
moral is tighten your bolts
KTM are known for having default factory issues. I know a guy who bought a 2012 and he could never get it started and it turned out the bike was pinching the fuel line from the tank.
Aesop rock : none shall pass
Spokes?
HONDA
he missed underneath the front fender
How To: Check if your bikes bolts are tight - TransWorld Motocross
@hardon4babes they already have one....
its funny because for race prep is just tighten everything, and KTM ready to race. And their known here as losing a lot of bolts. LOL
So it should just be called how to screw in bolts
All the KTM's I have see literally fall apart. like all the nuts and bolts fall off! I always laugh at my friends that own one! :)
Fuck that im to drunk for this shit. Who races their bike when theres 12 inches of snow on the ground anyways?
Ice racers do
Yamahammer2013 nah they race on ice not snow ;)
Squid WithGear iam not race but i do ride on snow and ice ... get to my channel to see my winter ridding !
You forgot one of the most critical points of safety for a rider. Spokes dude. Check your spokes. Anyone's seen what happens when you blow up a rip on a 100ft jump? All bad things. Check your spokes.
Step one, tuck your ears under your hat. Thats it.
Hi, Getting Better All The Time. rush ignorant
He don't even have bolts to tighten
Sure there is more than just tightening bolts to get a bike ready. But how often do you see goons in practice or races where their fenders, numberplates, shrouds falling off during the ride... LOLOL TOO OFTEN
Hey no monster in this one
What kind of bike is this
Crf450r, duh
+Anthony Alioto u don't even know anything about bikes😂💀
I just asked what kind of bike it was it could have been a 250
+Anthony Alioto u r so dumb, this is Travis baker and u could tell the difference between a 450 and a 250
You probably dont even race kid, i race 250 class come on now
Lmao, yeah. :p
i came to look at the bike
2 dislikes are yamaha riders
he forgot to check the front fender bolts
KTM - All The Above.
Another way to advertise the bikes and the parts on it -
7:24
to save you 7 minutes..... TIGHTEN EVERYTHING
as much as this guy is profesional these bolts are designed not to just come loose if u do the tight sooooo.....
KONY2012
Woopdee a peice of plastic falls off! Shit ive been to races where people ride so hard that their basically riding on a frame, sub-frame, two-wheels, and an engine! Hey guys dont forget to TORQUE your plastics they might not be .3475738382983 pressure on the plastic IT MIGHT CRACK!
This is the biggest load of bs I've ever seen! You get more out of your manual after 2m.
Torque wrench......
Well that would be his fault , The first this you do on a new bike is take it apart , Grease grease grease , That goes for every new bike .
type in phoebe dann #513
lol sponsored by fender...
i put gas in it and change the oil and ride it a little thats how i prep my bike for a race
yea chinese knock off bikes dont need much maintainace , for the price of repair u can buy an entire new bike
+D-Block yeah im sure chinese bikes dont take much
+D-Block follow me on insta to see my two chinese bikes 😂😂 loganblack___
Ok?? First that's bakers bike and bakers mechanic is Eric??? Wtf
Fuck another 4 stroke
I’m out
Just go around tightening everything 😂😂 useless
HAHA YEAH RIGHT suzuki is more reliable! dude srsly
Yamahas are fuckin junk!
Worst camera man
BORING
Worst camera man