Peugeot 407 / Citroen C5 CV joint and cv joint boot removal/replacement (Detailed Version)
Vložit
- čas přidán 29. 08. 2021
- Hello everyone today I have made a video of me replacing cv boot on my Peugeot 407 SW. As you know you can either stretch the boot and slide it over cv join or remove cv join and install a new boot that way. I have chose to remove CV join so this video will also be good for someone who needs a CV join replacement. I hope someone will watch a whole video and find it use full. I made this video because I had a advisory on my last MOT which was : Drive shaft joint constant velocity boot severely deteriorated Nearside Front Outer. [ 6.1.7(g) If you enjoy my videos and find it use full then please Subscribe my channel. I have tons of videos lined up and you do not want to miss it. P.S those who have a 407 16s with no centre cap You need to use a spare wheel as it has a hole in it.
- Auta a dopravní prostředky
100% the same way I've been doing them for 40 years. I admit that not all joints come off that easy and some are a real struggle. I also have a frame that bolts to the drive shaft and you pull the joint off by tightening the CV joint but well done.
Thank you mate.
Very good!!! Just 3 knops to put out !!!
As thorough a video as I have ever seen.. Keep up the good work mate.. Thanks
Thank you mate I am glad you liked it.
Not gonna do these fixes by myself but nice of you to upload these... Just wanted to say, Altho the 407 is relatively cheap in price today, it has one of the nicest butt's shape ever seen in cars.. ;)
100% agree in nicest shape comment
Spot on m8
Very well informative video
Love how you go through it to make it easy to follow
Thank you mate . I am glad you like it.
Gracias por compatir, buena explicación, podrías ser maestro por tu tranquilidad y simpleza para enseñar, gracias y ya soy tu seguidor.
Thanks for this information, have to help a friend do this very soon and having seen this really helps!
My pleasure mate
Again a fine instructive video, could be a little shorter only, speed upp the tightening of bolts and other not so importent sessions, but one can also fast forward those sessions😊
Very good detailed video and great camera work
Thank you mate I appreciate it.
Great video !!!Nice and clear
Thanks for your great tutorial video.
Thank you so much mate.
Great tutorials, camera angles, good job. But I've never seen so much rust on a French steel, especially not on a 407?
Good tips and nice work🧐😄🤜🤛
Thank you mate
Hi, i need to replace the supportbearing on this driveshaft, is it enough space as you show to pull the whole axel out? ( 407 SW HDI 2007)
Thank you
Good job
thank you
Is there any watcher attached before we put the 25mml nut to CV?
Very good 👍🏼✨
Thank you mate.
for more videos of peugeot 407 . thanks
You welcome. Thank you for a nice comment.
Very useful mate, thanks. One question, what is the difference between this joints and the one in Citroen c5 2010? I see on the forums that u can’t do it in c5 and don’t know why, cars are very similar.
Hi mate prity sure you can do exactly same things in C5 as you mention cars mechanically identical only shock absorbers is different if you have a hidropneumatic suspension. I think citroen c5 comes with hidraulic suspension and without so if it has a hidraulic then maybe something is different but If it doesn't then should be identical and even things like cv joins should be same.
@@Mad4FrenchCars its the standard suspension. I changed both wishbones this weekend and realised that rubber cover on the cv joint is completely broken, need to replace it next week. Thanks a lot for your answer 👍🏼
@@LDZTomek my pleasure mate glad you find it use full. You can just get a universal cv boot, remove cv joint change boot and grease and put it back on again.
@@LDZTomek you can get the universal gums wich stretch a lot and use a stretcher to put it over cv joint without removing
@@Mad4FrenchCars I purchased a Toledo stretcher to replace my CV joint boot.
It cost me A$200 for the stretcher.
I wish that I had watched your video before I purchased the stretcher (it needed a compressor and hoses which I also needed to purchase). Still, it was cheaper than getting a mechanic to do the job, and now I know what and how to do it myself. If I need to replace boots again, I'm going to try to knock the CV joint apart like you have done (on my Citroen C5).
P.S., I think that you need new drop links, too! That lower ball joint looks too loose!
My 407 sw is super reliable.
157,000 trouble free miles and only regular servicing and tyre changes needed
Big jobs like this, what are they?
This is not even big job. I would say big jobs would be cluch and cambelt. This video shows you how to change cv join and cv boot. I check my car myself but for most of people you only do it if it comes on mot as advisory or you start to hear cv join clicking on turns.
Peugeot 407 gear engadge to D but car is not moving....and some sound like metal to metal grinding at the driveshaft that attached to the gear box...same goes to R position...Do you have any idea what is the cause?...tq
Hey french car god, I've followed your other videos to success but I need to do the inner front boot. I think it should be the same right? I could leave it attached to the gearbox and fit the inner boot from the outer shaft (and just replace the outer boot for fun while I'm in there), right?
If you talking about gearbox side then yes you can do it that way but you are very likely to pull a drive shaft out on a gearbox. But if you ask me if its doable without pulling it out then yes it is. Need to take outer cv join off then undo clamps from inner boot and slide it carefully down a drive shaft. Put a new one in and put a new boot preferably for cv joint and nock back cv joint on a driveshaft. If you have done other things to success then I believe with a bit of care you can manage to do it without spilling your gearbox oil out. I believe in you.
Beau travail
Thank you mate
Нижнюю гайку нужно затягивать в рабочем положении подвески под нагрузкой, иначе порвёт Нижний сайлентблок
👍🍺
Help.. i wana ask.. for my 407 2.0 hdi i start car n go..and evrything is OK engine work ok drive power ok.. but sometimes ones in 2-3 weeks or mounth i start and engine works rough more loud then usual..like some older diesel when push gas. And make smoke when push pedal gas little. Maybe ventilator knows to turn on in that situation of work.. and after couple of drives with stops n shut downs engine then after some hours or 1 day.. start n everything is normal... 💁♂️ (sometimes know to turn on check engine..storring emission sistem)
EGR valve, might not fix all the symptoms, but atleast some. Just fixed one car from smoking and stalling randomly just by replacing that thing. Good luck.
Is this plastic or rubber boot? I have got a citroen c5 and they give me a plastic boot as the original part. What do you think which is better? Plastic or rubber?
I always use a rubber and i believe original is also rubber just much more durable harder rubber
Dude i need to know how to refil gearbox oil . 2.0 rfn engine , 5 manual gearbox
hi mate what car is it I remember citroen Xsara had this engine. whats your car ?
Doing it right now xD
Good luck.
Awww damn it, I should've bought the 35mm instead 36mm
Its ok 36mm will do the job