Multi Function warning light (zig zag) from Service Mode on Dacia Logan 2
Vložit
- čas přidán 5. 12. 2023
- ❤️ Please subscribe / @psvice ❤️
Multi Function warning light (zig zag) from Service Mode on Dacia Logan 2.
Steps:
1. Turn the key.
2. When you see the car and the service key, press the switch button for about 5 seconds.
You will see the icons blinking.
3. Then it will reset the service interval and the multi function warning light will disappear. - Auta a dopravní prostředky
You're a life saver. Thank you so much
I’ve got a dacia Sandero and the service/elec ( zigzag light) comes on at times with an increase in revs.. will go off when restart engine. Diagnostics reveal nothing . Today I had the ‘other/main’ service light go on with the zigzag one and this hasn’t gone off on restart . This light has only came on once before and engineer inferred the car needed a see which it did and I got it done some months ago but now it’s come on a 2nd time after the zigzag one ( which I have come to live with) so I’m extra concerned now .. any advice?
Try going to someone else that has a diagnostic tool (obd scanner), normally it should detect something if you say that also the revs are not right.
Which engine is it, gas or diesel?
It’s petrol .. on you tube there was a clip that said the engine amber light can be switched off by doing some turning the ignition on and off a few times ( without starting the engine) it also said something about the button that changed the notifications ie petrol, mpg, miles done etc and said something about the spanner icon.. but I had a service done not long ago .. I did all this however and while nothing happened initially, after I left it a while and restarted , it didn’t come on and hasn’t since.. the zigzag box however comes on and off most days though only goes off if I stop and restart.. I’ve sort of got used to this but yes, the revs def increase as I know it’s gone in evrn if I’m not looking at the dash as I hear and feel the increase tho slight ( on 1) I want to push the car off a cliff but I won’t yet esp if the main engine light stays off. Why is there even 2 anyway?
On some models it doesn't work, you need to delete it from the odb scanner
I got this yellow light on a dacia sandero.
And obd reader says zero default.
Could it mean the service light?
Thnks
Yes, most likely.
@@PSVICE cheers
On my Dacia duster when I press the button I only have options to reset the distance counter and the tyre pressures. No service key.
I think if the service interval wasn't reached, it won't appear, usually it appears after 8-10k km since it got reset the last time. The warning could signal something else.
Revisión en su taller abitual le toca cambiar aceite ectra pasar a inglés
Español
Mi a aparut martorul zig zag, Logan2 Break, 0.9tce, nu merge resetat cu tehnicile astea, insa masina nu mai trage. Se comporta exact ca si cum ar avea modul ECO activat. Practic daca comut on off pe modul ECO nu se simte nicio diferență. Abia ajung la 90km/h. Vreo părere?
Pot fi multe lucruri, cel mai bine o pui pe un tester.
Poate fi de la injectoare, egr, catalizator, sau nu trage aer cum trebuie. Daca ajunge doar la 90, intra intr-un fel de limp mode.
@@PSVICE mulțumesc pt raspuns.
What video in this....the zigzag concern no service .otherwis in your video is allready OFF. Video unusefull.
And how about when this zigzag light is in red wht does it mean and how to fix it?thank u
Same problem here!
For me the red zigzag appears then error comes out and the car doesnt want to move i have to stop the car!!!
I've checked the manual, if it beeps and displays red along with other warnings, it means stop the car, don't drive it, tow it to the repair shop.
An Obd scanner will show what the error is about.
I see you also have the check Engine Light on.
I have a Dacia Sandero 1.2 2013
Suddenly the check Engine Light and the zig-zag one is on
That happend yesterday, now it is not on anymore. What can it mean?
@@Popescu25 If both lights are on when the car runs, then get it checked, it can be a lot of things, you need to scan it for errors with an ODB scanner.
Maybe wait a week or so to see if they show up again.
In my case I didn't had the check engine warning along with the zig zag one, the check engine just stays on when you put the contact on but goes off after I start the car.