PROJECT EX-HAUL PT8 ALCOAS, DECAL REMOVAL, DETAIL AND DONE!
Vložit
- čas přidán 27. 05. 2024
- LOOKS LIKE WE HAVE FINALLY COME TO THE END OF THIS PROJECT. AT LEAST FOR NOW.... I AM GOING TO OFFER THE TRUCK FOR SALE AS A CAB AND CHASSIS WHILE I FINISH ANOTHER TRUCK I AM WORKING ON. IF IT SELLS BEFORE IM DONE, GREAT. IF IT DOESNT, WE WILL REVISIT IT AND DECIDE WHAT MOVE TO MAKE THEN.
OVER THE YEARS, FOLKS HAVE ASKED WHERE THEY CAN FIND MY TRUCKS FOR SALE. I HAVE NEVER WANTED TO "MUDDY THE WATERS" OF THIS CHANNEL WITH SELLING TRUCKS. I WANTED TO KEEP THIS CHANNEL FOCUSED ON THE BUILD OF THE TRUCKS. I DECIDED TO CREATE PLACE WHERE ALL OF THE TRUCKS I HAVE AVAILABLE CAN BE SEEN. THAT PLACE IS HERE ON CZcams ON "J.C. SMITH TRUCK SALES" I WILL LIST THE TRUCKS ON THAT CHANNEL. THERE WILL BE AN EMAIL ADDRESS IN THE DESCRIPTION BOX OF EACH VIDEO TO CONTACT ME IF INTERESTED.
HOPE YOU ALL ENJOYED THIS BUILD AS MUCH AS I DID. - Auta a dopravní prostředky
I'd never let a painted rim leave my shop not cured and without a inspection for unpainted areas. First off those should have been dipped then run thru the hanging rack and then through the oven to bake cure to be durable.. Then I would have called and said they was ready to come home, even if I had to pull a all night-er and got them done myself. I have gotten into cleaning all welding slag off them etching primer-ing them a couple coats before putting 2 coats of base on to finish them in the hot shed over night.
Bit much for bit white paint on few scabby old rims m8😅
About 4 years ago, I retired, and we moved to a smaller community in California, from the hyper expensive SF Bay Area. As part of that move, I moved my wife's small business, and all her stock, and materials. What I learned totally changed my attitude about U-Haul. U-haul is not some cheap, just enough to get it done company. By the time I was done with this move, I had rented and used 6 different trucks, and other U-haul equipment. Everything they have is designed to be used by someone that may or may not have any clue of what they are doing. As such their equipment was reliable, easy to use, and designed to make you the mover's life, as easy as possible.
Great video J.C.Smith really enjoyed watching the build on this truck. It turned out great should make a good truck for someone. Thanks for sharing stay safe Mr & Mrs J.C.Smith Your Wife does a great job cleaning your trucks.
When you first started that truck there was no denying it's past life but with the bob, rims, rear lights and flaps unless you were told you wouldn't really peg it as a u haul just looking at it amazing job by you and your wife
Truck looks great 👍, the interior specialists does a great job. Have a great evening JC and Mrs Smith
4:40 you just dont weigh enough .... when I put the tires on and I stand on it it goes down a whole lot further .....😂
We’re big boys.
That would
Make a great little welding truck
Must have cost GM a fortune to have so many options for those fender filler pieces. Truck looks sharp! 👀👍 Nice job on the interior Mrs. S 🔧
Your property tells me you have no shortage of projects. I love it.
Yet another well turned out truck.
JC you always do a top notch job.
I have never seen by a clean as good as she does man she claims everything like brand new and she does a good job
I really have huge respect for you and your wife for having such attention to detail on your work. Sadly, its getting harder and harder to see quality work in this business. I used to get kidded a lot because I wouldn't skimp on anything for my equipment, but usually got the last laugh in the long run. That would sure make a great gooseneck livestock hauler for a small dealer or big farmer. Bill
That's why I like watching you you do everything right and do a good job at it and that's why I love watching your videos
It’s all good because no one is perfect. We all make mistakes
hello JC, you took that turd and turned into a beautiful truck, like the wheels. bring on the next build :}
Great channel JC your workmanship is top noch 👍.
God bless from Cambridge England 🇬🇧
I want to thank u brother for the content it has helped me on so many jobs
Man that truck turned out nice. If I was ever in the market for one of these truck I would definitely want one you did because I know your not cutting corners to save a dime. You do it right everytime
A dumping flatbed hauler would be really useful
Id say your trucks should command top dollar if you have massaged them wdll..
Looks good
Awesome job on the truck. Looks amazing.
A fine looking truck well done.
Look at that! Just look at it!! Would you just look at that?!?!
Hi JC thank you for sharing 🤗
Hi J.C. & Mrs. Smith & it's is Randy and i like yours video is Cool & Thanks J.C. & Mrs.Smith & Friends Randy
The detailer on the case 😅
Turning.in to a roght good welder jc defo
Truck looks good 👍
Looks sweet nice job
Love channel JC love roll backs n rest ey fleet
Looks amazing!
If it doesn't sell as a chassis cab you should build a slide n tilt recovery bed for hauler it would.be.a good project.and it will sell all dat long.put an under reach on it also jc or do a recovery.build please
Great video!!!
I’d be taking those steel wheels back to the shop that did it to rectify the poor workmanship
Try powder coating instead of Painting …. Far more durable than paint . And you don’t have to wait for it to Dry …..
jC can you do a roll back recovery build please even just the fab work building a slide n tilt ect just a thought m8
The detailer on the case 😅
Ive got balancing liquid. You should try the hell of a lot easier than the beads.
My wife has the same boots
Came out very nice in the boss lady did a very good job cleaning it up too
Great content as always JC!
Nice video and truck turned out well. People often forget you get what you pay for and on commercial trucks that good deal can cost you a lot of money later. People always forget the down time as a cost since a truck has fixed daily cost that will compound while broken down.
Beautiful!
I like the way you are doing your channel now. I have learned a bunch watching your channel!
Exactly shoutout to miss JC aka Lady the world's greatest detailer
The truck looks very nice 👍🏻 and there’s one more thing that would make JC Happy.
For it to be in someone else’s driveway 👍🏻 again very nice truck JC and Mrs JC the interior looks very nice 👍🏻
Looks great great job good series
Beautiful truck well done. I really enjoyed the trip.❤️
That truck is sweet!!!!!❤
Nice work as usual mr jc!
Thats what I daily drive with a dump flatbed , perfect for a commercial roofer. I love the 8.1 with allison.
Nice work
The rims look great on that truck.
That is a definite 5 out of 5 stars!
Terry
Nice job as always hope to build that 650 with you guys
the rims do make it look really good
I will say bud you make quality videos that people can rely on what you say. If course you always factor in a 90 percent overkill but at least your right. Just watched a video yesterday of a dude dismount and mount tires instead of soap he used pb blaster.
JC if you go online Michillen has pressure chart based on weight . Not the sidewall stamp.
Wassup
just say'n tire stands out like a sore thumb; but tire 'sa tire. You do good work.
average buyer of this caliber of truck wont have issue with it. if they do, add $1800 and i can put 4 new ones on.
Thank you for sharing the things you do. Do you have a website where you post the things/ trucks you are selling?
What happened to the Diesel conversion?
Used 19.5 8 lug pilot aluminum wheels are impossible to find in south Mississippi
These are hub pilot
Nice truck how much are you selling it for
Nothing wrong with a gasser!!!
they will air up 10 lbs thats a lot of air
2:28 fella knew you were coming, dropped his beer and started painting. There's no way that's any other time than when you went there. Dunno what your relation with that place is... but that kind of ... thing would never allow me to do business with that individual again.
im not a patient person.
How much are you asking for it I’m looking for one
watch the entire video
🫡🫡🫡
Why pick them up if they are still wet makes no sense
do you really think i knew they were still wet? come on....
Sandblasting is a hateful job!
Almost as hateful as polishing aluminum wheels.
The truck is looking spiffy!!
Great video!