So, at this point, we know I had the plug back wards (reverse polarity). Since I couldn't find any videos on here about this setup, we'll use this as an educational video. Go check out the video that shows it working, and this might help some of you out there.
Hey Man if all else fails just refer to the manuals !!! Also don't bind the receiver to the radio with servos plugged into the receiver one you see the green light on the receiver turn off your transmitter and unplug the batter from the rx then power th rx and tx back on the light on the rx should light up green !!! Hope this helps!!! Cheers carl 👍
You plugged the battery wire in the wrong way unplug it and flip it around. I did the same thing it took me forever to figure it out. I did the same thing!!!
Take out the battery plug on the SB on your receiver and put it in slot number four at the top, then put your tworeceivers in one and two not Cbus ones
Hey bro, try turning your controller off again and battery off and then turn all back on again Oh, make sure you’ve picked the right setting for telementary receiver Is your battery a Lipo battery battery?
So, at this point, we know I had the plug back wards (reverse polarity). Since I couldn't find any videos on here about this setup, we'll use this as an educational video. Go check out the video that shows it working, and this might help some of you out there.
Thank you for this Video. I have done the same mistake and i could not found the reason.
Did you see that I got it fixed?
Yes. Perfect. My last RC car ive driven 25 years ago. At Had chanched much Things.
Hey Man if all else fails just refer to the manuals !!! Also don't bind the receiver to the radio with servos plugged into the receiver one you see the green light on the receiver turn off your transmitter and unplug the batter from the rx then power th rx and tx back on the light on the rx should light up green !!! Hope this helps!!! Cheers carl 👍
I hope so bro I will give it a shot, thanks 👊
You plugged the battery wire in the wrong way unplug it and flip it around. I did the same thing it took me forever to figure it out. I did the same thing!!!
🤣🤣🤣🤣 how funny I just took it to the hobby store, and they said the same thing 😆 😂
@TheNitroAddiction is super frustrating, but now we know! We need videos like these to help us.
@chriszautner4778 Yep check out my next futaba video I explain 😒🤣
Thanks for the sub bro 😎👍👊
Not
Familiar with that radio mate, but I hope you get it sorted !
Thanks I will eventually
Take out the battery plug on the SB on your receiver and put it in slot number four at the top, then put your tworeceivers in one and two not Cbus ones
Will do that, thanks alot 👊
Hey bro, try turning your controller off again and battery off and then turn all back on again
Oh, make sure you’ve picked the right setting for telementary receiver
Is your battery a Lipo battery battery?
Thanks, yes, it's a lipo
your plugging the servos in backward
And the power yes sir I was doing it wrong, thanks for the help