When you are building something big like a bridge it can be hard to reach around to the other side to hold the head of a bolt while tightening the nut. It would require another person which increases project costs. Also this system reduces the torque the operator must resist when the tool is putting on the nut. The torque is easily in the hundreds of ft lbs range, and into the thousands for larger bolts. The tool is holding both the bolt and the nut. Once the proper tension is reached the tool automatically removes the tip of the bolt to prevent over tightening.
![Tension Control Bolt Installation Guide [EN]](http://i.ytimg.com/vi/CxgiUJmdVl4/mqdefault.jpg)
Greeting from Venezuela 🇻🇪
the excellent video, thanks!
These are the best!
Thank you!
Thank you
torque it until the tip snaps off you will have achieved the right amount of torque on the bolt
So the tool grips the bolt and the nut and applies opposing twists to each until the tip shears off?
i wonder how we can unbolt?
But.. Why?
Off to the youtube rabbit hole i go to find an answer.
I literally just said this out loud then saw your comment l
When you are building something big like a bridge it can be hard to reach around to the other side to hold the head of a bolt while tightening the nut. It would require another person which increases project costs. Also this system reduces the torque the operator must resist when the tool is putting on the nut. The torque is easily in the hundreds of ft lbs range, and into the thousands for larger bolts. The tool is holding both the bolt and the nut. Once the proper tension is reached the tool automatically removes the tip of the bolt to prevent over tightening.
@@Fix_It_Again_Tony Thank you. That was a good explanation for the how and why.
Круто
Wher can I get
高强螺栓
Does tip get recycled?
Steel on any construction project gets collected and sold to scrap metal companies at the very least.