How to Make a LED Cube at Home
Vložit
- čas přidán 6. 09. 2024
- Learn- How to make Arduino based Dancing LED Cube at home.
Components used
1) Blue LED x64 www.flyrobo.in...
2) Arduino Nano- www.flyrobo.in...
3) 100-ohm Resistor x4- www.flyrobo.in...
4) Thick Wire etc.
Thanks for Watching my video
Arduino Code- drive.google.c...
Music from NCS Release
Elektronomia - Sky High
• Elektronomia - Sky Hig...
I've never seen a more organized and clean building process like this
One of the best ways I've seen of constructing the cube. I've just tried soldering up a 3x3 cube using the LED legs, as per the instructions, and the result isn't cube shaped (the anode legs aren't long enough) and it's basically an abomination. After seeing your video, I'm encouraged to give it another go, this time following your guidelines!
you all prolly dont give a shit but does anybody know of a way to log back into an instagram account?
I somehow forgot the account password. I appreciate any assistance you can offer me
@Axel Ali instablaster =)
@Killian Jayden i really appreciate your reply. I got to the site on google and im in the hacking process now.
Seems to take quite some time so I will reply here later when my account password hopefully is recovered.
@Killian Jayden it did the trick and I finally got access to my account again. Im so happy:D
Thanks so much you saved my ass!
@Axel Ali No problem :D
nice and clean. love the way you soldered the circuit ♥️✌🏻
lots of work, awesome result, cool seeing this when studying electrcal engineer
thanks very Match! I 'm using with my students in Alto Longa City - Piaui - Brazil.
Very good work young man !!! total respect for the code well done ..... pure and concise !!!God bless you and your familly
Eric from France
Thank you so much Eric
@@tapendramandal , hello.Your video is amazing I have one question for you. Can you give an example which wire should be in this cube. Because your video is the best of all about led cube and i want to repeat it) I have all components, but i haven't got a wire and i don't know what wire should be.
@@tapendramandal Can you upload code again? Link is broken. Can I make it 8x8x8 with larger arduino?
It was freaking awesome... U r a true inspiration for teenagers like us
thank you rishita
@@tapendramandal The leds are 3mm or 5mm? Also can you share the code again?, because the link is not working
@@chrisk6363 I couldn't find the code too
@@tapendramandal Brother where the code is
Ur just awesome.how do u know that in our mind.VERY NICE explanation.After watching ur video these kind of projects looks very easy and simple.UR DOING SUCH A GREAT JOB
thanks himanshu
Himanshu Suthar executing is much easier than planing, design and programming that kind of project. It's like building Lego model from a instruction manual: you don't have to know why, just follow the images and you will succeed. But creating your own model with the same quality and complexity from scratch: much harder.
its look hard to me bkz i dont know any programming languages.But i know what arduino is and how its working i can also understand concept behind any arduino projects.i have lots of ideas but i cant execute that. IM A ELECTRICAL ENGINEER NOT A EC OR IT ENGINEER
Himanshu Suthar then find people who do the programming for you. Build a team, you present the ideas and convince them. If it is good they will come up with that they need for the software to work and you provide that (with hardware schematics, prototypes). That's what engineer teams are about.
+Himanshu Suthar no need to know any programming just follow the procedure carefully hardware is very important in this case..if you know the general things about electronics then i am sure you can make it
The very VERY best 4x4x4 led assembly video I've seen yet. Liked and subscribed!
Subscribed! The easiest and clear LED cube tutorial I even seem.
thank you jerry
I agree with you. He was clear and direct. No windings.
Nice work Tapendra. I especially liked how you coded the patterns. My primary interest in creating one of these is getting hands on experience coding the led's, etc... Great project, simplistic enough for a beginner hardware guy like myself and I got a kick out of how you did the "pcb" routing with the perfboard. Saved to my projects folder, I'm on this. THANKS!
बहुत ही शानदार LED डिस्प्ले👍
You're crazy man, I love it. :D
Your English is too bad
...
...
Slowly it's a joke
I am to an electronic
student I have learn so much from you
vasu kommi loves India
Tere ko iska code malum hai???
Dear Tapendra: I copied your project and it's working perfectly! Thank you very much for your clear video and descritpion! The code is funny. Keep publishing these nice projects!
Olá, podes dizer-me como é que os leds funcionam se eles não estão ligados ao grn pin?
@@Rubenlousada Olá. De facto, não está ligado a nenhum GND, mas lá que funciona, funciona e perfeitamente!
@@olhakesta ainda bem... mas poderias publicar um video de o cubo a funcionar? É que quero fazer um isto para o projeto da escola e quero ter mesmo a certeza que não estou a ser enganado. Obrigado :D
@@Rubenlousada Ok. Já o podes ver em czcams.com/video/ZucPTD1hncs/video.html. Boa sorte com o projeto escolar!
@@olhakesta Muito obrigado, desculpe ter desconfiado :D Hoje em dia nunca se pode confiar no que se vê na internet. Bom resto de noite :D
Broo after soo many years U r back....
Congratulations 🎉🎉🎉
Vaai heart mil Gaya....
Broo now will U give more content please comment..
btw big fan 🙏❤️🧡💛💚💙💜🖤
Buen video, excelente ejecucion del projecto, pero el link del codigo no funciona.
Podria actualizarlo?
Gracias
I took help of this video and able to make my own LED cube. Good work, keep posting.
plz fix code bro !!! 404. That’s an error.
High Low delay blend yeetest comment here 😂
@@lokergames7058no😂😂
Awesome man! I think diffusing the LED's with sandpaper was a great idea and then how you built each row. Did you write the code? Great build and very detailed. Great job man.
Code in description
Code in description
Finally i made this project and its working very well.
Zeeshan Fazal how did u inter the music?
Can you help me with this ?
good mind for engineering the mechanical layout and method for the LED levels!
Nice work
thanks
momin saifuddin
Arduino Droid, install from playstore
czcams.com/video/cNs6dK8hOY0/video.html
VISIT MY CHANAL :D
You made ,The construction of led cube very simple and understandable
Amazing creativity however the music is making me obnoxious. Especially when it's maxed volume
Loved it! I am Really satisfied.
संतुष्ट तो हो गए, इंप्लीमेंट किए कि नही?
Tapendra Mandal is a real inspiration. The projects and the concepts have been amazingly covered. I have been inspired so much that I have started put my own channel. I really hope and now believe that I can provide good and unique content.
Amazing project. I am just willing to go for it! Could you re-upload the URL of the code? It gives an error :(
Yes. I need the code too! This project is awesome!
Yess i also need this code its show error
Did either of you ever find a copy of the code. Unfortunately i built the cube before realizing the 404 error.
Yes I also need it now
yes me too
because in pin D0 of the arduino it puts it in pin D1 of the led and so with pin D1 it puts it with pin D0 of the led?
Great Job
I made it!
Very Very Nice Explanation !
Especially Frosting of LED and Straightening of wire
Good job. God bless you
Master!!! 🙌🏼
Made it yesterday , works perfectly fine , thanks Tapendra this is my second project from your works
hello, how does this works it looks like every LED has a connecton ?
@@HyndrosHD yeah ,each led has an independent cathode but the anodes leds in each layer are connected
@@ilyesilno4640 Ok understand so each LED has its own output ?
@@HyndrosHD Right
I have a question. Shouldnt the leds be connected to the ground pin?
Wow sahi nd easy
Good Work!!
How can I create my patterns?
Thanks!
Best regards!
if you see the code you wll understand it seems complicated but its not trust me :_)
I hope you are still reviewing and replying to comments. Thanks in advance.
I really liked your design and I followed pretty closely only made one change on how the vertical wires connected.
I did a circle with this wire just like you did with the horizontal wires.
I am having one issue, Column 13 (D0) doesn't have enough voltage to light the LED when the other 15 columns are on. Column 12 (D1) is slightly lighter. Voltages on the Columns 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 14, 15 are at 2.65v. Column 12 is at 2.6v and Column 13 is at 2.4v.
I have ordered some smaller resisters, I am going to try a 75 ohm first and if that doesn't help I will try a 62 ohm next.
If I change the code to turn on all LEDs on any one level, column 13 will not light and column 12 is slightly less bright than the other 14 columns. Has anyone seen this same behavior? I am running this with a Nano. As long as I don't try to turn on too many LEDs per level the design works well. If I do, column 13 (D0) doesn't work.
Thanks for your design, I enjoy working on projects like this.
Starting to build it myself. Have you figured out the issue? Also, what are the connecting metal rods called?
Awesome!
Can you please share the programming.
muy buen proyecto, me gusto muchisimo. me gustaria saber donde puedo obtener el código para la programación de arduino que utilizaste ...
You work is very very clear and very used fully thnx...
When the music play then the lights starts moving
ப
There is no part of the circuit that does that. It’s either coincidence or good video editing
Good going bro keep it up
Depicts a simple way to make the cube.Excellent idea!Keep it up.
Sir RGB led 3D cube with Arduino next project
is that thing must plug to your smart phone when you want to turn it on?
is that follow the rhythm of any music or just follow the rhythm of program?
pls answer @tapendra mandal
@@Ajaytshaju please explain I need to do this project
@@mariammalbadryy7719 plz contact me on Instagram. instagram.com/_electro_aj_/
best video with instructions seen on youtube will try this. 😊
Hey mate, how can i light up one single led?
Could you please let me know?
Multiplexing, look it up
Great Scott made a good video explaining how it works...
Basically, you switch the LEDs so fast your eyes can't notice.
well done guys keep it up..!!!
Link given for Arduino code is not working..
thanks..i fixed the error
@@tapendramandal send ur arduino sitting pleez
Bro please send your code
@@tapendramandal hi bro pls send your code
@@subratabhuniya451 please share the program (code )
Clearest tutorial till now
Plz components name send me
And how to programing
www.dropbox.com/s/rc5fqckls9tsjpx/4x4x4%20led%20cube%20code.txt?dl=0
Can you make it with arduino UNO ?
I like ... will be doing this with my boy 👍
What is arduino code?
The link he give in his description is not opening
Yes
It's a Program File (Source Code) Download ArduinoIDE(See and Debug) or Any Text Editor To See it a .ino file
How???????
You are a scientist bro
Hey bro, can u do one for me? Tell me the cost, I will transfer
නියමයිනේ
Bhai mst way se samjhaya h aapne
please attach the code for the cube
It's in the description
@@Kuri0 404 your code and circuit file not inside
how did u do tue coding in ur phone??
install arduino droid on ur phone and connect it via OTG cable
Tapendra Mandal sir u hv connected your mobile with a device Na..is it...aurdino board...for 4*4*4 led cube
padhi srikanth it's not 4x4x4. It's just 4 layers... so real just 4....
i have 3 youtube accounts and i smashed the like button 3 times
Please provide the link of Arduino nano
Link is not working
i fixed that..you can check now
Tapendra Mandal where bro ur code
bro e-mail I'd please
I've built one after watching your video.
Is it working?
@@UnfunnyMayonaise yes
@@bibzv9133 damn..I am very interested in building and inventing things but I'm only 14 years old so I am just watching these videos 😅
can i upload this code from a pc
Yess
Please give me code
@@erangamadumal4956 Did you find the code?
Charge your phone...
haha😂😂
really simple and looks great when kept in dark. Thankyou bro for this video
link not working
i fixed that..you can check now
jaikant niwariya not working bro😒
+Ayush Soni open via chrome
Vladimir L
Tapendra Mandal yes bro not working
I really need that programming...
It's in the description
But its not opening
It's opening
@@veerchaurasia1646 can u pls tell me how to open because its showing no app on your device supports this download.......
Sorry I have not opened it that time but now I have opened but showing archive corrupt
Amazing LED display music.... Succes always
Code Work Arduino Uno ?????
Yes
Do you use the same components for the uno
Yes fcourse
Please send me ARDUNIO CODE on this project to my email
download in discrib
Muje ye video bahot acha laga
Really sir it awesome...
Very neat and clean work...
I made it sir 😊
Because of you ...
Thank you so much sir .
Keep it up sir
This is brilliant! I'm going to do this project with my 10 year-old niece (who's brilliant).
You brilliant medam
did you manage to do it? does it work?
Hey did u do it can u pls share the programming with mee its not opening here
Awesome 💐💐dill jit liya maza aya
Hi Tapendra, thank you so much for the video. The link to code files is not working, could you please provide the correct link?
Very clean and professional looking
Your technic of bending one leg of led is unique
I have made. So beautiful. Thanks a lot great brother
Mantra hoi vai,,, in 👍👍👍👍👍
Full Amaging Video
i love this work man it really works made it..... thnx broo and May Allah Give you success in you aims.....
Wow nice ❤️ keep it up
Bhai kya cube banaya mast yare
Best idea for cube building ive seen Good Work pal.
Nice work! You connect 16 wires to control by 64 led's. One wire for 4 led's. But in your presentation every single led works separately. How it works?
such interesting and good topic
tnq for shareing
Awesome Nice Amazing
I love Arduino IC😍😍😍
You are awesome bro.. Thank you soo much.. Please continue these projects
Awesome creativity, hats off to u
clean and well explained thank you very much
Thank you for your very clear details 🙂
Very nice and more helpful
Very nice 👌👍
Ohh...nice bro ...I understand why you sand the led ...to make it bright right
You always rock bro awesome cool excellent good.... I don't Have Words To Tell That You Are Genius.
And bro which wire you use pls tell me
Parabéns amigo...merece like
Very nice video
I made it exactly with your instructions, it works. Perfect video
Do u make programme also
@@mdnasimarafat4117 I just copied the programm and it worked, maybe im going to write an own program but thats lot of work
@@paulf4018 Hey hii .......can u pls share the program that u copied its not opening for mee........plzzz
@@gulnazfatima3944 can you send me the program please
@@paulf4018 please share the program
You you BOSS !!Best video 👍👍👍👍
Super 👌 work 👏👏❤️