Video není dostupné.
Omlouváme se.
This truck was accident due to overload the truck hydraulic scissor hoist was fully damaged
Vložit
- čas přidán 11. 08. 2023
- This truck was accident due to overload the truck hydraulic scissor hoist was fully damaged
This truck was accident due to overload the truck hydraulic scissor hoist was fully damaged
#truckjackscissorwasdamage
#machinist #truckaccident #Reparingaccidentaltruck
#scissorshoistwasfullydamage
With these Pakistani clips there are always loads of comments from people horrified by the workmanship, the tools, the lack of safety equipment. I find these videos engrossing and fantastic entertainment. These are fellas making do with what they have and they get it working. Great stuff
Making do is one thing. Common Sense it another.
Most of these people lack it!
@@BobSmith-mc7uq so they all had their toes fingers and wits about them. I had a foot injury for a summer and couldn’t wear shoes, all I could wear were jandals. I was up on scaffolds and using chainsaws, operating diggers. You become more aware and more careful.
@@BobSmith-mc7uq I wonder if @dansteel8805 would also buy a truck repaired by these people for the same price he paid for one repaired here and if he would be happy to drive and work with it.
However, I doubt this very much.
The one place you choose to remove the dump bed with a crane is where the overhead wires are running!
Did anyone else notice the crane is still in gear while it is up on the outrigger supports.
No contamination in any of those welds.
20:40 Using a bent shaft to align the two pin bosses
25:37 OMG that rod eye.
Not a grease fitting in sight.
Yea something tells me that truck will be back for repair very soon, or straight to the scrap yard
They actually hit the powerlines with the front of the truck bed at 4:07 Classic. LOL
@@crocodile2006Almost caused another accident trying to fix one Lmao...
The quality of the welding leaves a lot to be desired. Glad that truck is staying over there. I wouldn't want it on our roads with a load.
These guys perform miracles with 7018 rod.
@@n.mcneil4066 YOU are delusional!
Most of their welds are HORRIBLE!
I agree the welds are terrible
You mean they overload trucks in Pakistan??? Noooo. 😂
Blasphemy!
ฟๆๆๆๆ
@@FrankHeuvelman😅😅😊😮😮
If they even have one lmao.
It was not an "accident due to overload" because such overload was not accidental, it was a typical "damage or failure due to negligence"
But that seems to happen more or less in every country, there is always some trucker who tries to save a trip by loading his truck twice as much.
Yes, it was a good joke, accidentally overloaded. I see so many videos from these countries and I have to say that overloading is standard there. Nobody cares about weight, it will be loaded as long as there is space. And mostly even beyond that.
Especially bad with small trucks, these are often so overloaded that the leaf springs are not only horizontal but even bent upwards. I have no pity for the people there, on the contrary I have pity for the raped machines.
Raped from people who don't have even the slightest understanding of technology or physics.
They even straighten the pin 😀
It’s great that you where able to straighten and rebuild the old one good on you! But myself I would be comfortable in my skin reusing it I would have replaced it. All that metal is fatigued and I think well compromised there fore I’d scrap it.
They brought it there because they wanted it done cheap
I wonder how many people they kill with some of their shitty workmanship.
Metal fatigue is probably one of the least worries on that truck. Check that cylinder "eye" at 25:40. DOT would have a stroke if they saw that.
Welcome to a world where labor, even skilled tradesmen's labor, is cheap and parts are expensive. In the first world, the parts are not worth five hours of a heavy duty mechanics wages, let alone twenty to thirty, but in Karachi, Pakistan, the math favors repairing the part over replacing it.
And that cylinder eye even has a hole for a grease fitting/@@cojones8518
When can I book my truck in for some work? Lovely job 🫣🫢🫤
We don't need no stinkin OSHA rules.
There’s no overloading in Pakistan. There’s heavy trucking and broke equipment.
trucks overloaded in this country.??
Never!!!!
Safety sandals on , welding sunglasses weared and we go straight to the next overloading , no fear !
*_Accidentally_* overloaded, there has to be so much time.
It's reassuring to know that they have learned their lesson and obviously won't overload it again, also that NO grease or paint was wasted in this repair. seriously though you have to admire what they achieve with what they have and be thankful they are not operating on our roads.
*_"and obviously won't overload it again"_*
Hahahahahah!
Nice joke.
I have to remember that one.
That shit is not gonna operate for that long. It'll fail again.
Overloaded? Surely not.
Another good video from the “health and safety” flip flop gang😂😂👍🏴🇬🇧
My favorite is the donkey flat bed vehicle of course, as well as when night falls the men still work. Truly amazing.
1 horsepower
And that donkey also gets scared at night!
You can be sure that the donkey driver is a driver owner that his rig is paid for.
These guys do a great job with the tools they have. Just goes to show, you don’t have to have a lot of expensive tools.
There's no way I would ever drive one of these trucks after these guys worked on it. They may be doing the best job they can with the tools and equipment they have, but it's scary to think how unsafe it all is.
they make me feel guilty for the equipment I have in my shop at my small ranch. welders hoists plasma cutters etc.
عمل رائع ومتقن وسليم للشاحنه
مع عدم امان هؤلاء العمال الرائعين
اتمنى ان يراعي هذا الفريق امانهم بلباس احذية وخوذات الحماية
Ces hommes sont vraiment super géniaux,avec peut de moyens ils arrivent à faire un travail incroyable! 👍👍🏆🏆👏👏👍👍🇨🇭
Very nice
Come with me, and you’ll see, a world of OSHA violations! ………
in the twilight zone series voice!
I guess safty at work is not a thing ....................................
The sandals just get me. Running a torch, welder. Those feet must be like leather.
Well done 👍👍👍 gentlemen 🔥🔥🔥🔥👍
No eye protection. These men wear sandals while using a cutting torch. Lord have mercy! But i have to hand it to the Pakistan people,they are tuff!
How do you gentlemen do it? Welding and cutting and not burning your feet off from the sparks and slag flying around? Awesome work! More people should get such a work ethic....
Ótimo vídeo, parabéns, o youtuber do Pakistao estão de parabéns ja sigo 2, admiro muito seu povo, recuperam de forma artesanal as pecas o que preocupa é a falta de equipamentos de segurança para as pessoas, aqui no Brasil se troca a peça inteira. Porque os caminhões tem aquele parachoque na frente?
Overloading isn't by accident, you choose to overload...
I like the battering rams that they have on their trucks, cool.👍👍👍
Love the steel toed boots !!!
They sure do keep the track Mechanics busy fixing overload brake downs in Pakistan 😂
They even put pjarmers on there trucks
ALWAYS...😃😃😃
Well if they wouldnt load these trucks with 4000. tons maybe the wouldnt break as often Just an observation!!!!
Those welder guys have to be colorblind
They really making museum art, nothing technical here
Кран работает рядом с проводами и кузовом их задевает.Это жесть....
Hiasan melampau buat berat lori je
Mesmerising , gifted , hardworking Craftsmen ! Only wished they were in Suffolk as my 2004 Merc CLK would idles them
Note to myself: buy a set of these work pyjamas!
a city of horn blowers. the project was an OSHA nightmare ! never seen a crane's wheels turn when in the air and in use.
In most (if not in all) 1st world countries the work carried out by guys like this would be deemed unsafe, illegal, and unroadworthy. But this is not a 1st world country. I dont condone nor disagree of how they go about but they are only trying to make ends meet
The standards that apply here have their reasons.
It is mathematically and physically predictable that the "repair" shown here will be neither safe nor permanent.
I want to see you when you get involved in an accident and then it turns out that the person who caused the accident was driving in a box like that.
With all the moving parts in that lift mechanism i didnt see any grease zerks let alone any grease... amazing
Who the fuck needs lubrication? If something falls apart, just take it back to the “workshop” to fix it.
I believe that every 3 months they need to repair everything again.
Never in the course of human history have Alvin and the Chipmunks worked so hard to do such poor repairs.
I'd trust those welds to the end of the street.
(And the crane truck hitting the utility wires AND the building getting the body off was a special extra.)
Urdu always sounds like that when speed up.
Truly shocking
Mis respetos a estos hombres, con muy poco equipo y cero elementos de seguridad hacen un gran trabajo.😮
Very nice. Good content. Everything needs to make a contribution. Stay safe! Bless.
good enough for another 100 million miles.
Necessary mother of all inventions
OSHA would have a field day, with those businesses.
OSHA would drop dead immediately if they visited this!!
That was a great job done. 🎉🎉
how much weight is this truck built to handle. 10-12 tons. ok load 20 tons. no wonder they go broke, but they have to be overweight to make money. but agree that they are damn good considering the tools they have.
Молодцы 😊.
Eu Roberto Castro parabenizo vocês todos pelo seu trabalho Deus continue abençoando vocês em nome de Jesus Cristo/ //Brasil
at 17:01 does he say that he needs a banana?
Does anyone know the purpose of the bunch of chains hanging below the front bumper?
Male truck, must have a beard. hahaha
I read somewhere that the more bling a truck has, the more successful the driver appears, and therefore more likely to get hired. I'd appreciate a cultural expert's opinion tho'.
safety at its absololute worse, quality control at its worse, all the material used has been stressed and damaged it will never be safe to use.
amazing skill sir bhut hard work hai
Thanks
El primer gran error, es mantener el centro de gravedad muy alto, siendo que va a llevar carga pesada... Y luego hay muuchos otros errores que lo llevan casi a la locura...
Truck beds and hoists are usually damaged during material hang up or sloping dump areas. Rolling the truck is gonna get exciting…..
Do they get paid by the weight? Is that the reason for overloading their trucks?
This guy with the donkey needs to let the donkey get a rest carrying all those heavy metal parts . And the wagon is about 200 pounds and the weight of rider and metals wow thats messed up.
Wir bruzzln uns nen Kipper zusammen 😃
Well that takes it all even using a donkey for you're yard you guys are amazing and also very good worker's the technology is 100 year's behind
Good on men still getting the jobs done
Hard working people...However, I don't have much confidence in that repair!!!
Love the donkey cart !
fantastic watching you guys
Its hilarious to me that they do all this work in sandals. Seriously.
You have to hand it to these guys, they can fix anything. Not sure if I would want to drive that truck on a job hauling anything.
According to the ILO reports, in Pakistan 2.2 million people die every year due to work-related accidents or illness, more than 270 million workers are injured and an estimated 160 million suffer work-related illness.
On the basis that the population is only 241 million, they must be importing victims.
They should of made a new hoist instead of fixing the fatiged metal, we all know once metal is bent up then straightened its never as strong again.
Equipamentos de segurança é zero para um acidente não falta nada.
All they know is overload. Weight, speed, traction, momentum are concepts not yet understood in the third world.
Did you notice that this frequently overloaded truck has a tag axle? The next part to fail will be the front differential.
Вместо кузова, можно ставить ж/д вагон😂 Разницы ни какой
это наши друзья по БРИКС. ещё немного и мы скатимся к ним
Love how they make do with wot they got
I wonder what that powder which came off when he was grinding was... nothing good for his health I'm sure..ships aren't know for health benefits...
Definitely there is no quality control here.The welding leaves a lot to be desired.
Sandals while welding?
Devido as condições precarias até que da pra relevar
"This truck was accident"??? What the fuck does that mean?
OSHA, the bane of all things professional, would crap their little lace panties of they were to walk up onto a place like this in the so-called "free" America. Cutting torches while wearing sandals, etc. These people get the job done with very few resources.
dThey need to discover Blaster, WD-40 and Kroil. Proper eye protection would not hurt, either. They do know how to make heavy duty but crude clamping devices.
The only one who seemed to know what they were doing was the donkey....
Do you try to build the dumper case as high as possible? holy shit,must be exstremly top heavy loaded
Loaded tandem & semi dump trucks are tipsy at the best of times when box is raised while they are on a side incline.
Grease gun would go along ways to help!!
There was not one grease fitting on this whole hoist setup.
Going by the standard of welding and complete lack of grease used in this rebuild I think that the guarantee on this job would be 5 minutes or 5 miles, whatever comes first.
God help 'em if that truck ever does 5 miles in 5 minutes.
So sunglasses work Ok as arc weld visor lenses in Pakki?
And everyone welding is immune to UV melanoma because ? ? ? (because life is cheap?)
I wonder what load the safety jandels will withstand before toes go flying off?
Steel toe sandals?
Never ceases to amaze me how much squatting goes on in India or Pakistani (where ever this is )
How about spending less on decorating and more on maintenance?
Ars longa vita brevis
I would hesitate to trust a rebuild job on a structural part that has already failed once… or twice. 🤦♂️
Not a pair of shoes in the whole town.
Hey india a truck lasts longer if it is not overloaded
Again, love those steel toe’d sandals
Toată stima pentru măgar. Măgărușul face toți banii.
That is one of the worst things I've seen them do...that will get someone killed..it will definitely brake again
Imagine if he went thru a DOT station!!!
Crane hit wires above it I seen
Poor donkey, he work so hard i'm so sad for him.
Are grease and oil forbidden substances in Pakistan?
Love to see more of this.
lebi tepatnya memang sudah usang... banyak yang sudah keropos atau karatan