emergency bulkhead light fit 52
Vložit
- čas přidán 29. 08. 2024
- I bought an Ansell emergency light fitting and found that the instructions left a little to be desired.
I guess that an electrician would know what to do, and so understand the limited information. Having said that the first instruction is ..... turn the power supply off !
From a practical point of view my shed electrics have never blown so I do not have a particular need for the emergency functionality. However the charging light is bright enough to for me to find the light switch on a dark night .... and it might save my bacon one day.
Shed guy
Thanks shed guy. Just taken in a job doing these… what could possibly go wrong 😂
Thanks for the vid, Ive got two to replace tomorrow.
I know where the test switches are for them, but wont be a good idea to isolate using them.
Hopefully will find the breaker feeding these 😁
Thank you.
Great vidio mate i have a lot of these becouse in winter is everyones boiling the kettles the power goes out!Cant see i have the same ones so now when the powers off we can see!
Thank you
Thanks for that i was wondering if the jumper was the switch for maintained and non-maintained.
thanks for explanation
its shocking how they can getaway with poor to no instructions, they should at least have tutorial videos online.
Thanks, now I got my one working😅
I just want my light to come on when the power has been cut, does it matter which port i put it in on the permanent live and neutral? Think i might have a defective batch as the light just stays on and its killing off the battery, to top it off the charge indicator light doesnt light up either?
I had the same issue and it was the little jumper loop that was the key for my light. Stick to wiring the ports according to the markings on the fitting. I made sure that things were as I wanted them to be on the workbench BEFORE final mounting .
They do make it tricky
Shed guy
Do you know where I could order some wire in order to extend the mains wires to the terminal of a fitting? I.E for those situations where the mains wires don't reach the light and need to be extended using other wires?
time to call in a sparky ....... I will put in a light fitting , but not mess around with the supply
Capacitors you mean.
hi horse
oooh didn't think of that good point
have a nice bag of oats
shed guy