10,000rpm, Long rod, VVTi, Turbo 4AGE Hilux - dyno tested
Vložit
- čas přidán 21. 08. 2024
- Get merch:
garage4age.dig... - NZ - AU - Global
garage4age.cre... - USA - UK - Global
Test engine spec:
Old engine :
Smallport 4agze
ARP rod bolts
modified and ported head
toda valve springs
New engine:
7a block
4age crank
custom maxchina rods
je pistons
toda oil pump gears
modified and ported head (bigport head)
toda valve springs
g4a vvti
both engines:
gtx2860 gen 2
g4a bolt ons
52mm itb's
3" exhaust
link g3/g4 ecu
I lied, its limited 9900rpm, not 10k. Other news, I have added a db sound meter to the dyno wall. so you all can see how deaf I'm going. Also have a new mic for the camera, which was being used for the dyno pulls and the clips at the end. If you didn't get past the graphs at the end you probably should.. So yeah things should sound a little closer to what the actually sound like. As always, if you missed the engine spec's they are in the description. Giz a like and all that weird stuff that everyone begs for, so i can afford to put the rods back in my block when they fly out.
Awww man - we didnt see the magic cam install procedure :P Awesome work! Love the vids, info and dyno results and repeatability - long may the "truck" run! A real sleeper build as well lol
@@cbdrift Everyone knows the vvti cam install is still top secret haha
Sound like a very happy motor. Full song reminds me of a big turbo E85 CA18DET I built 15 years ago. VVT is a wonderfull thing and makes wonders for the powerband, some guys are locking them up and I allways thought that's the dumbest thing ever.
@@Garage4ageNever hated a youtuber like this before🤣🤣🤣.. its like the magic show in the street but they won’t tell you the trick😭😂
Great work as usual
In a world of insane numbers, the clips at the end show that 200kw is still plenty of fun
We need to know the in-depth stuff about the VVTi retrofit. That shit is cool as hell.
Agreed, if this man makes a kit, id buy it ASAP.
this is the fastest sounding 200kw ive ever heard. My rotaries get close, but this definitely takes the cake. Sounds wicked!!!
Sounds sooo good on those paddock runs !
Torque curve and the band width are pretty wild.
Would be comical to see it pulling a trailer.
I line towed a nissan safari with it for 30km once haha. the new engine should help with that
@@Garage4age Hearing in really pull through that rev range but under heavy load would be pretty sick, probably hard to get across on video
Sounds amazing! Looks like it goes even better. I really enjoy your scientific approach to vids.
Ive got a fairly serious ek civic with na honda b18cr in auckland if you are interested in consulting on or dynoing it in the future for cash for your future projects.
Thanks! yeah fire me an email if you want, garage4ag@gmail.com
That sounds like a full on rally car on full song!!! Bloody beautiful!
always love more turbo 4a content from you. Thanks for sharing with us.
I've been enjoying watching your videos and trying to learn some stuff. I think what would be really valuable to me and potentially others is a summary/talking video, like a, "what I've learned so far and my theories" about all the things you've tested. Be great to build a bunch of discussion in the comments too 👍
oh what a nice peaceful view of the countryside...BUUUUUUWAAAAAAAAHHHHH.....STUUUUUUUTUTUT....BUUUUUUUWAAAAAAAAAAAAAAHHH!
Im amazed every time you upload a video of your engines even after all this time 😁
In 1990 I fitted a 4AGE to a 1988 Suzuki sierra, it was a lot of fun, I still wish I never sold it.
Thanks!
Love this truck, sounds absolutely mental
Danke!
Nice mate, new engine is making the same as my bigport with stock cams on 1 bar. its very obvious the vvti helps with lag on your setup compared to mine. thanks for putting so much detail in your videos!
Fark! Those sheep are going to get their hay delivered in record time
Absolutely awesome numbers to see all over the graph. giving me ideas on my next engine build for the driftcar down south - this is exactly what I need. Will you be making a VVTI kit for the public?
hopefully doing more work on it this year. to get it to something i can potentially sell as a kit.
@@Garage4age I'm interested.
@@Garage4age Any chance you'll do a dual vvti 20v kit?
Also I thought you might be interested in a youtube video by hawes_power where his gt4 dynod up to 60hp and 100nm gains across the whole rev range with earlier peaks by swapping from a built 3sgte to a 5sgte beams dual vvti - same turbo, same boost, same pump fuel, just better head, extra 200cc and dual vvti. I think this shows potential for a boosted dual vvti 20v 7a.
@@TurnerJustis unlikely will do it for 20v. the vvt on them works ok for a basic on/off setup. plus it would actually be harder to do vvti on a 20v than 16v. exhaust side vvti isn't a big advantage. most of the gains are on the intake side.
Hi i love your 4age videos i have learned quite a lot ,i have a a 4agzte in my KP61 rwd starlet 14lb supercharger pulley ,3071 oil cooled turbocharger only comes on boost around 5500rpm makes mad power 20 lbs boost external wastegate, had head gasket sealing issues using a 0.40 cometic mls head gasket decked head and block now reassembling then final tune my computer is a link monsoon standalone ecu😊👍
Yes bring back the Hilux!
Watched from SI NZ
super cool, insane sounds from an old hilux. cheers from Minnesota!
So many places that little motor would be fun, early 80's Corolla, 60's/70's Lotus Europa, original MR2... the HiLux must be wicked fun.
And all that work, yet you can tell from the sound alone that it's a Toyota 4-pot, just something unique to the exhaust note.
I really enjoy the way those 4 cylinders sound
Very nice job.
Thing sounds like a beast....especially on your test pass
Most violent sounding 230kw ever. What a weapon and only 14 pisseye too
Love this channel. I have to give a shameless plug for Jimbo at Robot Cantina. Both you guys are grass roots channels that make CZcams great again - I know it, you know it bla bla bla .....
just watch out for gnomes
@@therealmudafuka7200 Indeed lol
I can't wait for the next vid tomorrow.
I love this truck, looks like a blast to rip around
That is a seriously impressive power band! So many people just chase numbers these days with no regard for driveability
Wicked stuff. Your first long rod video inspired me to build one for my FX. I'm part way through the build now with the shortblock built and awaiting to be mated with the head.
Usually i dont write comments, but your content give me alot of knowledge, your "good engine" makes almost same power as formula atlantic one, but there is not much to change to make more top end, maybe consider to try electric water pump instead of belt powered, like Old davies craig devices or tecomotive Tiny cwa + pierburg pump, i bought Old davies craig kit for cheap, i think it will be good topic for video and maybe a chance to beat formula atlantic engine
Fantastic and great sound
Fabulous Vid
Mad 4ag content as usual! Damn I wish I had my own dyno.
Awesome work! that sounds soo sick!!
Wow! If it’s got more power everywhere from when I went in this last, that’s gonna be pretty scary!!! We need another muddy hillclimb video!
Yeah its pretty salty now
Thats one sick engine with great power band! Would love to have such in my e30!
Try a M42B18/M44B19 Turbo Setup. You´ll be amazed. =)
@@derxKai I was thinking of this, as well as in e46 chassis for track days, but i dont know the limits of those engines, rev ranges etc. Those high reving turbo engines amaze me.
@@TomoReso My engine is a full stock m43b16 and it is giving 250hp at 1.5 bar of pressure, that was the last time I took the dyno and we couldn't finish adjusting the clutch started to slip.
Now I solved the clutch problem and I am at 2 bars of pressure, the only thing is that I have not gone to the dyno to find out how many hp it has.
I have seen the m43b18 with ethanol get 380hp full stock, it is not necessary to reach 10,000 rpm, valve floating among other bad things.
@@goyocarreras wow those are impressive numbers for stick m43b16, no thicker headgasket? what ecu?
@@TomoReso The engine is full stock, I have not opened it, the head gasket is original, and the ecu is also original, on my CZcams channel there are videos of my car, it is in Spanish, but so you can see how everything is assembled, I have even the AFM and everything works ok.
Mate that thing sounds miiint!!
Great sound man, and nice results. Looks funny.
Love the test run 🎉
I am digging the dual oil caps on valve covers.
awesome results, the new engine will be so much more drivable with this longer powerband.
Impressive power, especially if the RWD and huge tires losses are not calculated out.
It is a fair bit easier to get that power at the wheels in a corolla then a hilux.
Yeah all the numbers are at the wheels. Also running it up in 3rd gear, which usually shows less power than the 1:1 gear in rwd box. 4th would be almost 300kph due the big wheels and rpm, even with 4.88 diffs. which is way to fast for the dyno let alone the driveshaft.
Need some in-cab footage of the 'let's drive it through the field moments!' :)
Diesels owners like: 14psi? That’s less than my stock motor😮💨😂
You make me feel like a sausage with my builds
mad scientist at it again, thats it buying a shirt to fund bringing vvti to the market 🤪
Holy crap that jump by going to the big cam
Here i was thinking "you need the BIGGEST exhaust cam to get high rpm".
Ive tried the same cam combo a few times, both na (is a vid of the na test) and turbo on old engine in the hilux. only reason i didn't run with it on old engine in hilux. is it has to run super nice down at idle to do slow speed 4wd stuff. which the itb's and vvti solves. I should be able to run a bit bigger exhaust cam (have nothing in between here to try). but running the 278 exhaust cam out of this 284/278 set kills the boost threshold by about 1000rpm, for a bit more top end. which is a no go in this thing. Current setup, runs super nice. you would never suspect it pulls 10k rpm
Not going to swap the old head on?@@Garage4age
@@Clickeral Will leave as is, it already makes more than enough power for its intended use
Looks fun
Looks like a good candidate to replace the 3sge in the SW
Nothing like a 4a slappin 9.9k limit at 129dB. ooooftt That currawong knew to get out of dodge.
So bad bro I don't need a ute yeat but that would be it. Just to tow a small boat. Need 2 get 1 of yr stickers on the wagon. I'll email you about going bigger cams too when I'm aloud😢
I can't imagine put dat thing in da AE86.🤯🔥..
Please recover all the torque beyond the current peak by turning up the boost. You are moving past your knock limit rpm and assuming you have the fuel there is no reason to limit it to a number. Flat line the torque so you stay in the drive line limits.
Hey. Yeah that would be the plan if wanted more power. But it already has more than enough to do what it needs to do. Rolling over at the end will stop it going into the limiter as hard in mud holes and the likes
THAT is sooooo cool.
man. wish you can tune my 4age like this too. planning on running it on my 4wd with a 16inch 36 inch tyres with this setups.
I was expecting some crazy jump too :)
haha, maybe next time
I the words of one of the wisest man of our modern ages : "poooOOOOOWEEEERRRRRrrrrr!"
That's awesome, sounds off its face!!
I caution against reving this past 9 grand with the stock crank they start flexing and the rold bolts You WILL break them. especially with long rods they will survive a few dozen pulls to 10 grand but really you need to work on the bottom end if you want to rev there. also more boost there is a guy making 600hp out of 4age in his pikes peak car
The long rods will make it easier on rotating assembly, not worse. thats the whole point. less side loading and vibration, which is a bad day for the bottom end. As per the video I'm not chasing big power. just wide powerband. If i wanted big power, the combo of parts would be different
What an incredible power range it has! Maybe next step would be a decent silencer 😅
Coffee money
Thanks!
Nice on ya!
Love it… more test run footage please 🇦🇺🤜🏼🤛🏼🍀☮️
Please get your hands on some bike carbies and show us mere mortals how to get 150hp out of a light cam and which carb is best that would be a fun video i think
MORE TESTS time please!!!! :D
The sound 🥰🥰🥰🥰
looking decent! cant wait to see it spitting mud everywhere again if you take the cameras out for some bush bashing
That's really cool! I guess with a small turbo like that there wouldn't be much advantage going with a larger exhaust camshaft?
Is quite a few reasons why i done it like that, some as silly as that was the cams i hanging around. when pared with the exhaust cam out of that set it looses about 1000rpm on spool up. with the combo it has combine with the vvti it runs like factory at idle. good for slow speed stuff. if i acquire a slightly bigger exhaust cam i will try it.
@@Garage4age That would be cool to see what it does.
@@RocketRaspeed there is a video on my channel, where i tested the same cam combo on the na version of this engine, if you haven't seen it. it does basically the same thing as here. but yes im interested to see how big i can go on the exhaust side without loosing power off the bottom, or running rough.
@@Garage4agestock bigport cam is 240 duration and 7.6mm lift that might give it a little more compared to the 232 with 7.1mm lift.
@@brownsworthy7323 hey. Yeah a friend is sending me some. I need to change to a better cam belt so will swap the 240 in then
Awesome job!
I think I want you to help set up my redtop 3sge for plus Turbo to run in my St165 GtFour
4age is the best sounding engine
Finally!!!
god i wished you lived here, id throw money at you to build a motor for my 86
lol love the END !
Same geometry as the OS Giken long rod 4AGE 🍻
I think they may have moved the pin height up in the piston a bit too, so even better rod ratio, pretty cool kit. but would be out of my budget. my setup takes factory 4age piston pin height and 7a deck height. so off the shelf pistons work
Супер! Молодец! Когда нибудь и я турбо поставлю
What are the advantages of running the itbs in a turbo setup instead of just a single throttle body? And thanks for all the great videos, really useful information
Hey, thanks for the donation. Mostly so the engine runs nicer at low rpm and idle. With a big plenum single throttle intake and or bigger cams, engine will stall out easier and not run down to as lower rpm. ITB's will run a lot better down there since plenum is on the other side of the throttles. An engine with bigger cams will run nicer with itb's than a single plenum regardless of plenum size or if its na or turbo.
Cheers. Does the Hilux feel more alive with the new engine?
Have you considered tuning with rising boost curve? Add extra boost after the torque peak, so the engine would make more power without self destruction.
yeah huge difference in how it drives with the massive powerband. its already got more than enough power, but yeah thats what i would do if wanted more. its quite high compression mid to high 10's. It's not running any form or boost control atm. just spring pressure
A 35% increase in the RPM range ratio with the turbo spooled and more power throughout is respectable.
Is this called a 35% increase in bandwidth?
284whp on big tire like that is a lot. That could bd 330 on small tire.
😍😍😍😍😍 what clutch and transmission are you running? Love the sound
Amazing video as always.
Do you know the best stock block setup for a 20v silvertop?
Как всегда четко
👍
Seems kind of an odd choice for a lifted truck with big tires, but I’m sure it’s a blast!
Is there a measurement of the area under the power curve that would effectively convey the increase in usable power from this setup better than peak power?
Very cool! Does it run stock valve springs?
toda springs. i swapped to shimless buckets also
Someting tht poped out from yota "atlantic racin" so its blk top 4ge w 7a bottom not blue 4ge botom?? Idon know its been so while ive f w 4age n yota family, Nice high rev, mechanical tuned buld up
that's a very angry sounding a series! 😁
Hey mate just wondering if you’re worried about the shim over buckets crapping the bed at high rpm? I watched a video of a guy talking about 4a’s and he mentioned Toyota switching to rockers for the 2zzge head because longer duration cams and higher redline. Cheers
I have swapped to 1sz shimless buckets on this engine. You will find 2zzge uses rockers for the vvl system, rather than them switching to them for rpm issues
Hey I know this probably isn’t the best way to ask this question but how did you do this swap I have a 87 4x4 and have been trying to figure out how you did it for years since I saw one of your videos and now my motor is out and I’m debating on a 4a 16 or 20 valve or a 2JZ and I have really liked these motors so any info would be very appreciated
we need the in car footy
exhaust wrap vs spool time pls )
Is there any mileage in feeding in some more boost later in the rev range to keep the toque from rolling over up top?
Yeah was going to if needed. but don't really notice it rolling over when driving it. it doesn't drop below the peak power of the old engine. will leave as is, so smashes the limiter slightly less haha. If engine was in something else would put a boost ramp in it
@@Garage4age makes perfect sense
Hello my friend,make video about phase timing (ECU)like you have about ignition timings,if it possible ❤
I have quite a few cam timing videos if thats what you mean. 4age vvti: czcams.com/video/B1mAesApxv0/video.html k24 : czcams.com/video/rX6rAjI-VW0/video.html
4age turbo czcams.com/video/bnIsNwdKnCw/video.html this one is not variable but you can see what the settings would be if it was
@@Garage4age I watched these videos,I think they are very useful. I asked the question a little wrong, I’m interested in how the timing of fuel injection itself is affected, maybe your ecu doesn’t have such a function, I can’t know for sure, in mine ecu has a map similar to an ignition or mixture composition map, only there you can set the timing of fuel injection, for example, into an open valve or into a closed valve, etc. ,exactly the moment of opening the injectors,That’s what I meant
@@nivagarage301Ah you mean injector timing. some ecu's call it different things. I did a little bit on it in this video czcams.com/video/lt7JpXEfH-4/video.html Isn't usually much in it power wise. generally just adjust till afr is the richest, meaning the fuel that is injected it getting burnt/properly burnt. then trim the fuel back to the correct afr. can make the engine run nicer at low rpm, sometimes is a little to gain in the top end on an aggressively cammed setup, but only if have big injectors that are running at lowish duty up there. i may do a video on it at some stage
I would like to know how to put vvti cam shafts on my 4age for my NA AE86. is there any guide or something?
Would it be better to just start with a Beams motor ? Will it make more power?
i was under the impression high duraton / lift cams would negatively impact low end torque / power and instead you gained a tonne of top end, how did you manage to gain low end aswell as top?!
Thats why i only swapped the big inlet cam in with stock exhaust cam. if I use the exhaust cam out of this set (they are actually na cams) it will come on boost about 1000rpm later than stock cams. have done the same test on the na version of this engine czcams.com/video/-Inv1TkANls/video.html Which is the same head and similar bottom end. It really needs the vvti to make it work so well though.
@@Garage4age interesting, so installing intake cam and leaving exhaust stock actually has opposite effect of having both!
Sik lux