Nissan Note Airbag Light Flashing
Vložit
- čas přidán 27. 08. 2024
- This 2007 Nissan Note E11 model came in for diagnosis of the Airbag light flashing. It's an MOT failure item so needed fixing to pass the test. Join me as I diagnose & repair the problem.
Please watch the other videos on the channel. / oneauto
and subscribe to keep up to date with the latest uploads.
This video is for entertainment purposes only.
My Amazon shop is now open where I have shared the tools I use in my videos and other cool stuff I can recommend.
amazon.co.uk/s...
(I make a very small commission from anything purchased)
Thanks for your support!!
Instagram: @oneauto.youtube
/ oneautogarage
ko-fi.com/oneauto
Cannot thank you enough, followed word by word, works perfect, fitted ebay £15 special from china, all in perfect working order, do it yourself its easy when you follow the instructions by the the god of nissans, cannot thank you enough , a brilliant mechanic who made it so easy, Kind Regards
Excellent video. This has saved me £100 which my local garage asked for to fit the squib i had bought.More power to your elbow mate,and thanks very much for sharing.
Don't suppose you have a video on how to replace the steering wheel inserts for the audio control etc etc ? My phone button still not working after replacing the air bag squib.
Thank you for the very clear and informative video. Managed to get a used part from a scrap yard. Don't think I could have done it without damage without this video.
Awesome, that’s great 👍
This is a great video. If you are having problems with you passenger airbags and you light constantly flashes, there may be a very simple fix at no cost. My 2008 Nissan Frontier SE stated my seat occupancy sensor wasn’t working. I tried to reset that annoying blinking light to no avail. Before I took it anywhere to be repaired, I dug deep into all the connectors and wires which were all good. However, moving my seat back and forth a couple of times, I noticed the cable leading into the seat where the mat inside the seat was pinch on the rail which the seat slides back and forward. Moved it clear and made sure it wasn’t kinked and everything is working fine. I did need to reset to get the light from flashing. My Foxwell diagnostics unit shows no fault and airbag is fine.
Very nice work Rob in replacing the clock spring and great job in explaining its operation. And nice to show the fault at the end of the video. Keep up the good work and have a great weekend! 😀👍
Thanks Terry and you mate 👍
Two points from my experience of doing this.
One, there are three similar but different parts available.
Two, be careful when fitting the indicator stalk, there is something which works the self cancelling. I missed it and now have do my own cancelling as I can't be bothered to strip it down again.
I have the same problem with my Nissan note 2009 now I’ve seen the video seems pretty simple procedure thank you rob for posting the instructions 🤗
Lo solucionaste tengo el mismo problema
Mate, this is an amazing video! So easy to follow and well explained. You've saved me a lot of money! Thank you so much!! ❤️
Really well done, Rob. I like the tip for removing the steering wheel.
Good detail very comprehensive
I’ve just received my replacement spring. Off eBay. The sellers post states it fits my car. But upon receiving it, it has another socket where I’m guessing another plug would go in for duel steering remotes…just hoping it doesn’t impede replacing it now.
Great informative video
Thank you for sharing this tutorial. It made it a breeze to do the job myself.
Many thanks for this - it worked a treat & saved us paying a garage to sort it 👍👍👍
Nice job finding and replacing Rob. Even thought the battery is disconnected I am always waiting for the air bag to explode!
Cheers Mike. I'm lucky I suppose cause back in the 90's when I worked at a Peugeot dealership I had to change hundreds of clock springs on a recall, so I got used to having your ass twitching when taking the airbag off 👍
As long as you disconnect the battery and wait several minutes you’ll be fine. Since there still maybe a little power stored, you can turn your headlights on a bit to ensure no power is anywhere in the system to trigger the airbags. Good luck. I’m getting to replace my clock spring on my 2008 Nissan Frontier SE.
You do tidy work Rob. Thanks for the break down at the end. It's cool to see the actual fault.
Thanks Wyatt. I like to tear into something faulty to find out why.. Always did as a kid.
I realised when editing that I didn’t explain/prove the problem and luckily I hadn’t emptied the trash.
Thanks a lot mate, also for anyone needing to reset the Airbag light after:
- Turn ignition switch from OFF to ON.
- Air Bag warning lamp is on for 7 seconds and turns off, the turn ignition switch OFF within 1 second after the lamp turn off.
- After ignition switch is turned OFF, wait for more than 3 seconds.
- Repeat steps 1 to 3 twice. ...
- Turn Ignition switch ON.
Great video man really detailed, always have a massive fear when working on airbags it's going to go off in my face!
Tripped on the channel by chance from your comment on an Edd China video.
Giggled hard with you cringing with Nissan due to 8 weeks shipping from Amsterdam, good content!
Cheers from Portugal!
J'ai le même problème sur mon Note de 2012. Maintenant, je sais comment le faire. Merci beaucoup Rob.
Awesome video the end bonus part was worth watching too.. thanks for putting the effort
Very helpful. Clear video. I rarely signing in but I needed to thank you
Thank you 😊
Thank you for this very informative video, done the replacement myself with this!
You just saved me several hundred pounds. Thanks!
Thank you for the video, just changes the clockspring in my 2007 versa, here in Hawaii.
Hawaii!!! That’s friggin cool 😎
Hawaii!! That’s cool 😎
I’m trying to do the same on my 2007 Versa, but I can’t get the airbag off. Any tips/tricks you found out when doing yours?
@@lukegiduz7040 I used a couple long thin screwdrivers, like the ones used for electronics, to push the tabs inside the holes on the back of the steering wheel.
It takes a surprising amount of force to push those tabs in, and you have to use something pretty stiff. My first trys were with a plastic tool and it just bent.
Good luck! And happy new year
Nice to see this come apart. It must be frustrating to have all those hidden plastic tabs to find, without breaking any. Fortunately these steering column and multifunction switches seem to be robust. Given all the moving parts I would have expected more problems.
Yes there’s always the fear of snapping the plastic on modern cars
Very helpful video.
Thanks for the part number!
Very lovely video. Thanks for sharing. Well done.
You are legend mate , Thank you
excellent video sir.
Nice teardown. Amazing they still use a physical ribbon cable, surely they could come up with a higher tech solution
Haha yeh, Bluetooth 💥💨 😃😃
thanks for making this video ive got the some problem with my dad car nissan note 2008
hi What a great video. I followed your very clear instructions and replaced the clock spring. i have a new problem. once i fitted the replacement the esp and slip indicators come on. what did i do wrong 😅
Strange. All I can think is you may have pressed the esp off button somewhere? What fault codes do you have?
this is a great video for quite a naughty problem. Thanks a million.
very exquisite explanation gent
... it could not be explained any bettaah,
koodos goes to you seah! for your knowledge has sprog me out of dependency and stiffer rates of repugnant and scrupless mechanics.
there foah , I saluted you inconsiderately .
best regards to you seah .
Great video really detailed, Thank You Very Much.
Excellent video..
Thank you for this amazing and very helpful video, well done. Why should I take my car to a Nissan dealer to rip me off, with your help I can do it myself following your instructions step by step so help me God.
Next time remove the bulb (led)
🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
Great video!
😂😂 Or Black tape over it 🤪🤪
One Auto, had that on a rover 75 sold by a used car dealer in thrapston many years ago, didn't like it when I turned up and put the clocks on his desk lol
Really enjoy your videos Rob. Keep up the good work.
Mike H Thanks 👍
Thank you mate.same problèm .buttons on the wheel are not working.sape car model same year.😊
Hi Rob, I managed to fix my airbag thanks to you. I didn't know where else to post this, but I have a new fault with my Note 2007 it's an auto 1.6. I have a rumble/drone at speeds over 25mph coming from the front end that's worse on tight bends, it's not the wheel bearings as I've changed those any ideas as to what it could be? I think it's getting gradually worse. Cheers 👍
Thanks Sir,...its clear for our guidance in order to fix all of steering facilities problem. 👍👍
Amazing job has been done in this video, well description 👏
Thank you
Nice job there Rob !
Thanks for the video
It is really very good, thanks for your videos good job
Very good man! Thanks improv the image ok?
Hi Rob, i came across your channel, as i have a 2009 Nissan note which has a flashing airbag sign now. You say to disconnect the battery before starting the job. Unfortunately, i don't have the code for the radio, so if i disconnect the battery i will lose the radio. Instead of disconnecting the battery, could i just take all the fuses out, but leave the radio one in. Of course i will take photos and make drawings of exactly where each fuse goe where. Your thoughts will be apreciated. Many thanks, Oz.
My car has a solid airbag warning light constantly on I've had it in garage and they can't find the fault with there diagnostic scanner thing what one would I need to buy to be able find the fault they have checked fuses an cables under seat for any loose done the ignition on off thing that's not worked any ideas please mot again next week so need try get it fixed local garages are full so can get diagnostic test done before the retest date
Nice one. Even a bonus footage with a teardown and scientific analysis. 😅
😂 Cheers Joe
Thank you so much for taking me with you. By following to these istructions It should not be too difficult for me to solve the same issue of my P12 Wagon than you did. If I was not able to get a new Part, I 'll try solder it. What you think? Greetings from Helsinki.
Thanks for your comment. I don’t think solder will work as it has to flex, although I have never tried.
Great video . Quick question if I were to just remove the pin from the air bag would the light in the cash go away because my light is always on
No. The only way to do it would be to fit a resistor
Great video Rob 👍👍
Cheers Ricky 🍻
Good job thank you you are the best
Great job
Hi Rob, firstly thanks for this brilliant video 👍 I've just run a scan on my mums 2007 Note and I'm getting B1049 Driver Airbag Module - Open. I'm ordering a clock spring, but what I need to know is, is it safe to drive even if the light is flashing, will the airbag go off while it's being driven due to a fault? Cheers 👍
No it won’t go off as it is disabled with a fault logged
@@OneAuto Thanks Rob, much appreciated 👍
How many this piece cost ? and how much you cost to do this job for me?
I have a Nissan note 2008. I have 3 fauls because of this unit.
1. Horn not working.
2. Airbag flashing.
3. Back screen blade not working.
I live in London. Thank you
Great job Rob , bet you cant believe it that your still attracting birds pmsl
I have to beat them off usually 😂😂
What was the part number for the new clock Spring please ? Great work.....
Thanks. I have no idea what the part number was but I got it from the Nissan dealer
Thank u
What tool were used to do this want to make sure i have everything
Thanks
Hola algun video de como cambiar la columna de direccion. Thanks
Muito bom! 100% PERFEITO!
I know Im asking the wrong place but does anybody know of a way to get back into an Instagram account??
I stupidly lost my account password. I would appreciate any help you can give me.
@Kabir Jayceon instablaster ;)
@Mathias Kash thanks for your reply. I got to the site on google and Im in the hacking process now.
Takes quite some time so I will get back to you later when my account password hopefully is recovered.
@Mathias Kash it did the trick and I finally got access to my account again. Im so happy!
Thank you so much you saved my ass!
@Kabir Jayceon No problem :)
Great video, can I ask is it worth getting second hand from scrapyard or Chinese copy on eBay? New from Nissan is £206. Thank you
I would never do either... it’s your safety that is worth more
Pls can u show how I can personalise or even code in my Nissan note 08 I just bought.. dealer haven’t got the code and I bought it already..
Nice
Can I use the clockspring from a Nissan Tiida in my Nissan Note ? ...where did you order your part from having trouble locating the proper clockspring for my 07Nissan Note
I ordered from Nissan dealer. Not sure about Tilda
it is the same on all nissan airbags the cable is too stort
i was hoping you where going to take that clock spring apart wanted to know wot was inside
All in the interest of science Simon
lol i just salvaged some Bosch common rail injectors from my mates scrap pile interest of science
great video Rob ,thanks for sharing your skill with us
Do you need to remove the battery when working on an airbag as I know Bodgit And Leggit says you don't.
For the purpose of following the Nissan manual and the video.. yes you do.
(But I’ve done it without 😉)
I would play it safe and disconnect the battery and wait a few minutes before doing anything with airbags.
What's the part number guys?
Cheers for this , garage quoting me 300 quid for this when the springs 16 quid on ebay with 5 year warranty ? i guess thats Nissan parts or an Oem one as opposed to one on ebay with a 5 year warranty ,nissan have this car on recall for an airbag fault and say they wont touch the airbag until they repair the light and spring :) ...... i have not had the balls to ask for a quote from them , Diy time .
I have a Nissan qashqai 2015 with a remote key and when I turn it ON at he airbag light is solid and doesn’t flash. Even when I turn the engine on the airbag light is solid. Could you help me out?
You need to get the codes read by your local garage
One Auto, the code is B009488 but I installed a new dashboard and airbags and I still get this light
Check all of the connectors and wires good under the seat the ensure you have good connections and the none are being pinch on the seat slide rail. I discovered that on my Nissan Frontier and all is good and no codes any longer. The best part is I got rid of that pesky light.
I have a 2013 Nissan Altima sv an my airbag light stays on dosent flash. Any help. Thanks
G Paul Welch you’ll have to get the codes read for direction.
Any idea of the cost of the part?
I can’t remember exactly... think it was about £90 from Nissan
23:04 .... 318, sorted!
😂😂 Wow!! You’ve got it bad to notice that one mate. Were you watching in slow mo? 😃
This is not for non professional to do at home believe me
why do people take their cars into garages with their low petrol warning light flashing ive watch loads of your videos in particular where the low fuel lights actually flashing.do they think all mechanics have a side line selling second hand petrol.
Glad you torqued it to factory spec, click click 😂
As always 😉
What is the name of replacement part?
We call it a clock spring or rotary contact
@@OneAuto Thank you
Yes old knee right🤣🤣🤣🤣🤣🤣
Served me well that old knee 😁
One Auto, yes I bet them has you've certainly be on them long enough but I've heard all good reports when you are only a couple bad
Can the light drained the bsttety
No
I need the way to remove airbag flashing for murano 2006 many thanks
I don’t know this model but you have to start with a fault code scan to give you direction
You may have a bad connection under the passenger seat, or you could have a pinched or broken wire that has been pinch on the seat slide rail from moving seat forward and back. That’s what happened to me.