Don't Make the Same Mistake I Made with My Land Pride Post Hole Auger. Maintenance is Mandatory!!
Vložit
- čas přidán 21. 08. 2022
- Land Pride PD15 - 9 inch Post Hole Digger... broke. What you need to do so you don't make the same mistake I made. This was a costly mistake that could have been avoided.
Check out our channel @From Scratch Ranch to see how we got where we are now: / @fromscratchranch
Other videos you may like from @From Scratch Ranch:
Barn Build Timelaspe: • Barn Build Time Lapse ...
Septic Install: • Septic System Install ...
Water Main Line Install: • Installing a 260 Foot ...
Building my Loft Bedroom: • Building My Loft Bedro...
Dual DIY Spiral Staircases: • Duel DIY Spiral STAIRC...
We moved to the country: • WE MOVED TO THE COUNTR...
Acid Stain the Concrete Floors: • ACID STAINING the CONC...
Installing a Minisplit Air Conditioner: • Mr Cool DIY 24K Mini S...
Woodstove Playlist: • Wood Stove
Long Range Outdoor Wi-Fi: • WAVLINK AC1200 Outdoor...
DIY Horse Arena: • Building our DIY Horse...
DIY Range Vent Hood Playlist: • DIY Range Vent Hood
4 Board Horse Fencing Playlist: • 4 Board Horse Fence
Visit our Amazon Store featuring products we use and recommend: www.amazon.com/shop/fromscrat...
As an Amazon Associate I earn from qualifying purchases
I use Epidemic Sound for all my music. If you are looking for a music provider for video production I highly recommend Epidemic Sound. Click this link to learn more: www.epidemicsound.com/referra...
Be sure to Click Subscribe and ring that Alert Bell to follow us on our journey as we build this small Horse Ranch/Hobby Farm "From Scratch".
Follow us on our CZcams Channel: / @fromscratchranch
Follow us on FaceBook: pg/FromScrat...
Follow us on Instagram: / fromscratchranch
Link to our Website: www.fromscratchranch.com/
Contact Info:
email: fromscratchranch@gmail.com
mailing address: 1722 N College Ave. Ste. C #293. Fayetteville Arkansas 72703
So many words to explain such a simple problem.
You can save yourself a little post hole digging work if you stop the auger at various points while digging, raise the boom then spin the auger back up to unload it. This keeps your hole cleared out and neatly piles the waste to the outside of the hole. Also, one other note, the top of the auger will start to tilt towards the tractor as the hole gets deeper because the radius point is controlled by the lift arms and center link base. This is another good reason besides not standing next to an auger and driveshaft to be on the tractor while digging. You can move the tractor forward or backwards to keep your auger vertical.
Thanks for that additional info. This info plus the video will save me money and time!
Stay on the tractor - let it eat and then pull it up and out to throw off spoils, put back in hole and repeat until at desired depth. I paint flight at desired depth so you know when you good.
I ran across your video when searching "Kubota post hole digger attachment rock bit". I subscribed to your channel because I just bought 30 acres in your general area (SW MO). Kind of doing the same thing you were/are. I'm in the very beginning of the process. Hope to gain on your experience. I too will have to drill a lot of holes, but there is rock closer to the surface in areas of my property. almost looks like bedrock. Will probibly need a rock boring bit. Wish you had an public email account.
May I suggest shutting the engine off while your fingers are fiddling with the shaft bolts? If the PTO engages and starts turning the auger, you will lose your fingers.
Take the auger to a metal shop and have them weld on a new lip? My problem is finding new teeth for my make of auger. The ones in the local tractor shop don't match so I am "adapting". Now to fix the gear box.
Thanks a lot for the info about the fishtail tip. My Country Line auger is getting stuck each single time I hit hard clay and I believe the fishtail tip will help to prevent that.
I was watching Everything Attachment's video on their post hole augers and you might want to view it as he talks about some safety practices that might save you from becoming an amputee.
Amputee implys a careful surgical removal, PTO equipment snatches limbs off and proceeds to beat you with your own appendages.
I did something similar I just welded more steel on and went back to work. If I get another auger I want to look into a front mount hydraulic wobble auger. It pushed the dort to form the hole so the soil is even more compact when you drop the post in.
You can add water in the hole to help the auger dig.
The way your lackadaisical about walking right up to that pto shaft while its running makes me think how lucky you are. People have lost legs and limbs making those mistakes.
In my next video
How I lost my hand 😢
@matthewthompson5570 let's hope not. Although the inspiring confidence he inspires within the CZcams community that grasps his stupidity. CZcams is not liable because their knowledge is really limited on this subject and the spread of laim content due to the " keep your comments respectful Claus.
That was very helpful thanks
I saw this video and I had to watch. This is a very needed video! One thing I've seen people doing is sharpening the cutter edges. Sharpening isn't the problem, but they round the 90-degree edge. That makes it hard for the auger to cut especially in clay. W/o downforce, it really makes it difficult to dig holes. Hope that helps someone.
Another trick is adding water to the hole especially with a sandy loam. It helps give mass to the soil and allows the auger fliting to function.
@@wingwhacker7500 i was watching another channel and they used water plus bentonite powder
@@jozua715 Good idea!
Op, you need a decent crackerbox welder. Every farm ought to have one. Build thay thing up with hardfacing rods and use it. It would take 30 minutes. We appreciate the video and the information.
Cutting off the plates with the mounting holes, welding on a new plates and drilling new holes. That's less than $10 in material and probably less than $80 in labor at professional shop. And if you can weld it yourself.... It's definitely worth fixing the old one.
A decent welder fix that right up in no time. No way it's cheaper to buy a new assembly.
And put some good hard facing on it too.
I was just thinking that.
@@SteveSRTI came here to say this
..
RTFM strikes back hard sometimes.
Uhh, dude. That cover has holes in it so you can use a ratchet and socket.
Need a belltec. Those augers are made for this rocky soil.
In Rocky ground of Ozarks, I have had best luck with 12-inch auger on a rented Bobcat (diesel). I have doubts about any auger on 3-point hitch (compact tractor) drilling holes in the Ozarks. Comments?
You made me nervous walking around that spinning PTO shaft. For some perspective, look up "PTO injuries". Just don't do it at lunch.
Our auger has a plastic cover over the shaft and I STILL don't go near the thing. Seeing a human body "pop" while it wraps around one of those will scare the crap out of you.
Good info, btw. Love the channel.
100% agree. These videos should be demonetized. Funny how he talks about costly mistakes.
Thanks for sharing I just got my new tractor 🚜 today just waiting for the weather to clear up we've had lots of rain in Arkansas 😅😀
You can buy that bottom where the teeth bolt on and weld a new one on. Save that old auger. Dont you just love those safety shield? One of the most unsafe things to do is to be off the tractor while running a post hole digger. One piece of clothing or anything gets wrapped your done.
You don't have to start the tractor to lower the 3 point hitch, BTW.
Kubota dealer robbed ya! I bought a different diameter auger bit at Atwoods for way cheaper. You can use the same gearbox and just change the size hole bit if you want.
I have two words for your old auger... Wel - Der...
We swap out our teeth maybe every 15 to 20 holes. We have that rocky clay as well.
Moral of the story: don't be dumb.
Good tip. Good teeth :)
You have a nice piece of land with a new building on it and you think a $180 auger bit is expensive? Harbor Freight tools are cheap, go get a good 1/2 inch drive socket set, a box wrench set, and a few ball peen hammers. With that sawmill those will be useful and get a 3/4 socket set while you at it. Should cost about $250 for all that.
You should never get off your tractor when you're using a post hole digger the most unsafe thing to do I remember years ago when I first started digging holes a local paper published a picture with a guy buried around his auger
hard faceing might help...
You paid 600$ for a 9” auger? Bro I just got a 12” for 200$. 870$ for both the auger and the digger together.
Fix old one for about 30 dollars
You have lost your mind walking around that auger.
14 minutes to tell us a mistake... serious ?? Get that $$$
You could have fixed that….
Unfortunately you bought the pricey mediocre brand Post hole auger which is disposable 😭😭😭😭
I think your being a little dramatic. Costly mistakes with farming equipment are in the thousands. You can buy a new auger like the one your showing here in Oregon for around $150.00…. I just bought three new ones yesterday for $450.00…..Just wait until your 4701 has a trans or engine problem, that will be costly. LMFAO
ρгό𝔪σŞｍ 💦
Stop saying shaft.
Just watched your video… I pray that you haven’t been injured… since it’s been a year or more…. Please stay away from running implements on tractors… you have a lot more work to do.
Get to the point.