Just put a set on my xj. The backlight has the most natural amber I have seen yet. It really mimics the oem amber marker lights. And they are very bright. For the price and size, definitely a great way to go
Just picked up a set for my dad’s XJ. I’ve already got $1,000 in BD lights on my JT so I guess I’ll have to splurge on the BD LP4’s or LP6’s. Too bad these came out just recently. Love the gator JT, I held out for a diesel and ended up not being able to get one.
Thank you! Yes when you turn on high beam it turns all the lights on at the same time. Only the low beam when on is 2 of the lights and is the flood pattern
Could you please recommend a switch pod on the grab handle that is compatible with the low and high settings of these lights? I currently have the RC 6, and I understand that it is not suitable. I would appreciate your guidance in finding a better alternative that works effectively. Thank you for your assistance.
So I bought the 6-in put them on my tundra. I love them. I do hate the inner side light. Don't know how to lock that off. How are you going to do yours?
I could use your help.... You did such a great job with this video I’m trying to follow your lead for my Jeep. I purchased the same Harbor Freight items, however I’m not sure how to connect the wiring harness to my VOSwitch. When you cut the switch off the wiring harness, you have 5 wires (#1 RED, #2 RED/BLK, #7 BLK, #5 WHT and #6 WHT/BLK). Can you share the color wire configurations you use for each of the VOSwitch relays to control the Flood and the Spot. I see the VOSwitch has two wire connections per relay with one being the ground. I called Harbor Freight Support…but they didn’t know. Thank you in advance for your help! This will be my first real Mod for my jeep, and I want to thank you for the inspiration.
@@Vehiclesupportedtravel Just checking back, did you have a chance to check and share your wiring harness to VoSwitch connections? Again, I appricate the support.
@@soundjocky ok looking at it now since I ran the main power and ground straight to the battery I just ran the power for low beam solid red to my switch one and the power for high beam white and black to switch two. The other wires i just taped off. I guess you can run the grounds to the switch also but not needed. Since the power is connected direct to the battery the switch is just completing the circuit to turn the lights on off that’s why you only need to wires going into the vosswitch
@@Vehiclesupportedtravel Thank you. Just to confirm. VOswitch Aux 1 (Low Beam) 1 Red wire (+ terminal) Only. Aux 2 (High beam) White/black striped (+ terminal) Only. All other wires taped off and did not use. Do I have that correct? I appricate you taking the time to walk me through this...
It really depends on the performance and durability, a less expensive light that only last one winter would not make my budget list ... Now a $100 light that competes with lights 3 or 4 times the price ... Sounds like a sweet deal to me...
Machine is coming out great dude cheers 🍻🍻🍻
Just put a set on my xj. The backlight has the most natural amber I have seen yet. It really mimics the oem amber marker lights. And they are very bright. For the price and size, definitely a great way to go
Very VERY helpful video. I was trying to decide between these and the Roadshock 6s, but these seem like more than enough...!
Yes the light output is very good on these!
@@Vehiclesupportedtravelare they legal for driving? Or strictly off-road only
I was gonna buy these but then found the Nacho lights and went with them.
I like that voswitch you have but it appears they’ve discontinued that type
Thanks for the review. I wish they had a 7".
They make a 6 light version that's a little larger
Just picked up a set for my dad’s XJ. I’ve already got $1,000 in BD lights on my JT so I guess I’ll have to splurge on the BD LP4’s or LP6’s. Too bad these came out just recently.
Love the gator JT, I held out for a diesel and ended up not being able to get one.
Try to aim the lights out to the side a bit , could fix the hood reflection..
Solid
Great review and install video. Looks really nice for the price. Can both low and high beams be on at the same time?
Thank you! Yes when you turn on high beam it turns all the lights on at the same time. Only the low beam when on is 2 of the lights and is the flood pattern
They hold up i think it’s money well spent
Could you please recommend a switch pod on the grab handle that is compatible with the low and high settings of these lights? I currently have the RC 6, and I understand that it is not suitable. I would appreciate your guidance in finding a better alternative that works effectively. Thank you for your assistance.
The switch panel I have is called voswitch it should be available on Amazon
Nice review.
Did you wired through the voswitch or separate?
I went through the Voswitch for the actual switching but I ran the power wire directly to the battery
These are what im going with. What brand is your front bumper? Looks real good!
Thanks! It’s a poison spyder bumper
Thanks! I'm doing the wiring right now
So I bought the 6-in put them on my tundra. I love them. I do hate the inner side light. Don't know how to lock that off. How are you going to do yours?
I’m thinking maybe just a piece of black tape for now
I was thinking a sticker. Just wasn't sure how to do it. Thanks for responding but I definitely am happy with the lights for the price
Another video comment said black vinyl tape works great
What Amp fuse did you wire them to? Both the lights and the amber backlight.
I used the fuse that came with the wiring harness I think it’s a 20 amp fuse
Thanks
I could use your help.... You did such a great job with this video I’m trying to follow your lead for my Jeep. I purchased the same Harbor Freight items, however I’m not sure how to connect the wiring harness to my VOSwitch. When you cut the switch off the wiring harness, you have 5 wires (#1 RED, #2 RED/BLK, #7 BLK, #5 WHT and #6 WHT/BLK). Can you share the color wire configurations you use for each of the VOSwitch relays to control the Flood and the Spot. I see the VOSwitch has two wire connections per relay with one being the ground. I called Harbor Freight Support…but they didn’t know. Thank you in advance for your help! This will be my first real Mod for my jeep, and I want to thank you for the inspiration.
I’ll take a look later today and let you know which wires I wired where
@@Vehiclesupportedtravel Thank you!
@@Vehiclesupportedtravel Just checking back, did you have a chance to check and share your wiring harness to VoSwitch connections? Again, I appricate the support.
@@soundjocky ok looking at it now since I ran the main power and ground straight to the battery I just ran the power for low beam solid red to my switch one and the power for high beam white and black to switch two. The other wires i just taped off. I guess you can run the grounds to the switch also but not needed. Since the power is connected direct to the battery the switch is just completing the circuit to turn the lights on off that’s why you only need to wires going into the vosswitch
@@Vehiclesupportedtravel Thank you. Just to confirm. VOswitch Aux 1 (Low Beam) 1 Red wire (+ terminal) Only. Aux 2 (High beam) White/black striped (+ terminal) Only. All other wires taped off and did not use. Do I have that correct? I appricate you taking the time to walk me through this...
I go to h t and I never see this sh....
*How important is it to light up the top of the hood? How dark could it of been?* 🤣🤣
*That has to be the worst place to add additional lights.*
$100 is not budget.
Yes they are budget not cheap
Cheap ass. Up your game or get out 😂
If that’s not budget, then you’re too poor to own a car.
Considering my ditch lights were $400 I’d say they are budget
It really depends on the performance and durability, a less expensive light that only last one winter would not make my budget list ...
Now a $100 light that competes with lights 3 or 4 times the price ... Sounds like a sweet deal to me...
They look dull
Not sure what that means
@@Vehiclesupportedtravel when you turned them on they looked dull, not bright.
@@gerard0l6569 maybe just the camera but they are very bright!
@@Vehiclesupportedtravel very possible