the peltier reduces the temperature all the way down to -16 degree C. But it depends upon the model. the peltier that I'm using right now to reduce my overclocked PC's temperature can reduce to -20 degree C and it really helps me because my CPU's temperature is lower than my room temperature (14 degree) crazy cool right.. this is only because I'm using multiple peltier instead of single.
@@letsgod Our tech team is already working on it. We release the results only to our clients (because of our policies and sponsorship) But in future, our tech group will share the results in social media. We already have a CZcams channel about technology. Haven't developed yet. From Jan 2020, along with our partners, we will publish every single test reports. @eyeofjakir (Jakir Hussain) is the head of the developers and research team. You can DM Jakir to know more about our projects.
@@yourcommentmightnotworksop9987 Yeah i know, but how that thermodynamics runs? Is it gives any changes to regular phone thermal? Does it even heats up the phone? (Yeah if the heat sink fail to rapidly cooldown the peltier, you can watch Linus video as example, they compare water cooling and peltier cooling system on overclocked cpu and guess what, on water system they got like 83 C while on peltier they reached 108 C and their rig ahut down upon thermal safety) On top of that, how about the design? Without proper placement of the peltier, how does it even cool down the phone cpu and gpu? Those require some measurements
What if you water cool an i9 using thermoelectric cooling while water cooling the thermoelectric or will that have the same performance impact since the thermoelectric will be too hot for the water and therefore the thermoelectric doesn't generate enough cool temps
One thing to remember: peltier module has 2 sides, cooling and heating. If you put the wrong side on your phone...it might aswell become the thing you swore to destroy.
It will work more better if you use a alluminium sheet. Just join a long size of alluminium sheet from side of your camera joined with you paltier module
There are quite a lot of misses in this video [1] Wrong side of the Peltier module facing the heatsink [2] Lack of thermal paste between Heat Sink and Peltier Module [3] If the Peltier Module is hot glued to the phone case, it wouldn't always be flush with the surface of the phone which would drastically decrease the efficiency [4] Lack of a Temperature comparison before and after the setup (I mean, considering that he placed it facing the wrong side, it wouldn't do much) [5]? I wouldnt call this a miss but he forgot to provide any model number/links for the items. Although its easy for someone who is somewhat knowledgeable in the electronics field to find the proper stuff, It would be better for newbies to get the links for the correct ones. (I hope this won't offend anyone)
Not only that, but he didn’t put thermal pads in between the phone and peltier. And the cpu is in the top left of the phone so it’s not even cooling it that much
thats a cool idea.. But I have doubt. Apple said "ambient operating temperature of an iphone is 0 Degree to 35 degree. but peltier reduce the temperature to all the way down to -17 degree C. what happened to your phone when it become cold.. please reply me.. I'm trying to make my phone's temperature down while I'm shooting videos. 1. did ur phone turned off when it reached non-operating temperature? 2. How long we can use it?
No... Peltier doesn't work that way.. if it is not properly cooled down it won't go to that temperature thus reducing its performance... In the video this device won't even be 2% efficient because there was no thermal paste applied on the device and between the heat sink.. And also the cooling fan isn't that powerful to cool down the heat produced by the peltier so not. Much of a use...
Good job very simple. I got one of those 2 can thermoelectric coolers in gonna use the parts from that and make one it was cheap and I never use it so it seems the way to go.
Eu pego duas garrafas junto elas com fita. congelo elas mído um pudesse de papelão do tamanho do meu celular e colo o papelão entre as garrafas e fasso furos no papelão para refrigerar mais rápido depois e só fazer um suporte para o celular não cair😊
@@nikhilrathod4773 how can you be you so sure.. Because the peltier freezes and might damages internal system in phone... And if it does not create moist please xplain.l
@@devilxjinyt ohh , its 3 years to this comment 😂😂 Yes, i found the answer, because fan is fixed on the heatsink, it have to blow air from outside to inside as a radiator
Este video tiene un monton de errores como poner el peltier en la contrario lo puso del lado que genera calor ,no puso una lamina de aluminio o cobre entre el celular y el peltier ,no uso pasta termica ,el ventilador tambien lo puso en el lado contrario se supone que debe echar aire al Disipador son observaciones que debe mejorar para tener un mejor resultado
MISTAKES: 1: MOBILE PHONE PROCESSORS WILL BE IN TOP SIDE YOU ARE COOLING IN MIDDLE 2: BY THE COOLING BY PELTIER IT EFFECT YOUR MOTHERBOARD AND PHONE WILL BE DEAD BECAUSE IT MAKE ICE AND VERY COOL AND IT WILL GOES INSIDE PHN COVER TO MOTHERBOARD 3: YOU DO NOT USE THERMAL PASTE 4: YOU USE HOTGLUE THAT EFFECT IN INCREASING TEMPERATURE 5: YOU USED A BIG HEAT SINK AND SMALL COOLING FAN IT IS NOT SUITABLE FOR COOLING THAT PELTIER MODULE
fool you put the peltier in wrong direction or otherwise i guess you live in Antarctica so that you phone won't freeze and last question how do you know that the cpu is located at that place
The cpu of the iPhone 8 Plus is not placed there! Not in the middle! When you have the BACK of the phone facing you, the cpu is in the left middle side, you could have a MUCH better performance if the cooling is placed closer to cpu
Its totaly fake beacuse 1: He placed hot side of the peltier touching mobile,it will make the mobile more hot 2: Even if he placed the hot side on the heatsink,it cant control the heat and the fan will not be able to remove heat from the sink and heat tranfer from hot to cold side
listen, the circuit board wont cool unless there is a vent in the back of the phone cover, that only cools the cover,lol phone and battery still gonna damage
Every one please don't try this because you mobile will be ded because that peliter will make ice so in your phone will be ice and phone will die if also you want to try then the that white colour plate and phone want to have a big distance or you phone will be damage
Don't follow him, it's was a wrong side, 12706 is the cooling side, it should be reversed.
@Aromal S bro is he connected with main plug or with battery
Ya you are right
1:00 you are right
@Aromal S I also realize that
Bro Processor is on edge y r u keeping in middle
Wrong question. Why freeze your phone?
Why don't You ask this video is for pubg lovers not for humans 😂😂
😂😂
You are absolutely true
@@whydontyouaskme are you mad how can a fan freeze a phone
very good friend, but failed to show how was the temperature
the peltier reduces the temperature all the way down to -16 degree C. But it depends upon the model. the peltier that I'm using right now to reduce my overclocked PC's temperature can reduce to -20 degree C and it really helps me because my CPU's temperature is lower than my room temperature (14 degree) crazy cool right.. this is only because I'm using multiple peltier instead of single.
@@WatchTheDevil very good friend, do you have any videos about this on your channel? if it doesn't have it would be nice to show
@@letsgod Our tech team is already working on it. We release the results only to our clients (because of our policies and sponsorship) But in future, our tech group will share the results in social media. We already have a CZcams channel about technology. Haven't developed yet. From Jan 2020, along with our partners, we will publish every single test reports.
@eyeofjakir (Jakir Hussain) is the head of the developers and research team. You can DM Jakir to know more about our projects.
Condensation will damage your phone internals. Do not use Peltier based coolers
Peltier go to temperature of 0 also
You definitely should do temperature comparison and performance gain to clarify the point of your projectand video
Otherwise, it's meaningless
Thts a peltier there
@@yourcommentmightnotworksop9987 Yeah i know, but how that thermodynamics runs? Is it gives any changes to regular phone thermal? Does it even heats up the phone? (Yeah if the heat sink fail to rapidly cooldown the peltier, you can watch Linus video as example, they compare water cooling and peltier cooling system on overclocked cpu and guess what, on water system they got like 83 C while on peltier they reached 108 C and their rig ahut down upon thermal safety)
On top of that, how about the design? Without proper placement of the peltier, how does it even cool down the phone cpu and gpu?
Those require some measurements
The performance is gonna drop no matter what but the graph slow down sort of
@Emperor lol isn't cold water is kinda overkill. But nice gain you got there
What if you water cool an i9 using thermoelectric cooling while water cooling the thermoelectric or will that have the same performance impact since the thermoelectric will be too hot for the water and therefore the thermoelectric doesn't generate enough cool temps
One thing to remember: peltier module has 2 sides, cooling and heating. If you put the wrong side on your phone...it might aswell become the thing you swore to destroy.
Por algo le puso un disipador stupid
المروحه تدخل الهواء أم تخرجه 😊
This cooling fan is really super fast then the other's cooling fan this video is amazing for pubg lovers
It will work more better if you use a alluminium sheet. Just join a long size of alluminium sheet from side of your camera joined with you paltier module
There are quite a lot of misses in this video
[1] Wrong side of the Peltier module facing the heatsink
[2] Lack of thermal paste between Heat Sink and Peltier Module
[3] If the Peltier Module is hot glued to the phone case, it wouldn't always be flush with the surface of the phone which would drastically decrease the efficiency
[4] Lack of a Temperature comparison before and after the setup (I mean, considering that he placed it facing the wrong side, it wouldn't do much)
[5]? I wouldnt call this a miss but he forgot to provide any model number/links for the items.
Although its easy for someone who is somewhat knowledgeable in the electronics field to find the proper stuff, It would be better for newbies to get the links for the correct ones. (I hope this won't offend anyone)
also the heating part of the phone is near/ under the camera where the processor is located
this is what ive been looking for
You didn't put Thermal paste between heatsink and Peltier. bro🧐🧐🤭🤭 else video is good but don't miss to do for views 🤗🤗
Sahi baat
Sahi baat
Kot ekanu
Not only that, but he didn’t put thermal pads in between the phone and peltier. And the cpu is in the top left of the phone so it’s not even cooling it that much
Lols he just want you to know the idea :)
Bro you doing wrong way same one see this hot side in to i phone back side it's wrong side
*THICC*
Can u show the difference in temprature before and after using this cooler.?
Bro u can say one side will be -¹17 and opposite side will be too hot
@@pushprajsinghpaleria698 what a load of shit
Does if affecting or not because of peltier want 12 volt but powerbank or cherger give on live 9 volt
it is good as there will not be moisture inside your phone
Bro you put the peltier module opposite side
It became you phone super hot
He attached the peltier in the wrong way but this is okay you just need to flip the connections.
thats a cool idea.. But I have doubt. Apple said "ambient operating temperature of an iphone is 0 Degree to 35 degree. but peltier reduce the temperature to all the way down to -17 degree C. what happened to your phone when it become cold.. please reply me.. I'm trying to make my phone's temperature down while I'm shooting videos.
1. did ur phone turned off when it reached non-operating temperature?
2. How long we can use it?
No... Peltier doesn't work that way.. if it is not properly cooled down it won't go to that temperature thus reducing its performance... In the video this device won't even be 2% efficient because there was no thermal paste applied on the device and between the heat sink.. And also the cooling fan isn't that powerful to cool down the heat produced by the peltier so not. Much of a use...
@@siddhantkaushik5548 thank you bro
Bro the fan will blow air to phone side or backwards! Tell me naaa🥺
Backwards
@@pranavh437 towards heat sink side
Friend where side was the fan blows??
I had planned to do this, with a couple of modifications, and then compare it to those who sell it I have
Bro you should put thermal paste on the heatsink and the phone or just use toothpaste if you dont have one
Good job very simple. I got one of those 2 can thermoelectric coolers in gonna use the parts from that and make one it was cheap and I never use it so it seems the way to go.
Eu pego duas garrafas junto elas com fita. congelo elas mído um pudesse de papelão do tamanho do meu celular e colo o papelão entre as garrafas e fasso furos no papelão para refrigerar mais rápido depois e só fazer um suporte para o celular não cair😊
I wonder if that thing will create moist inside? Aix
No it won't.
@@nikhilrathod4773 how can you be you so sure..
Because the peltier freezes and might damages internal system in phone...
And if it does not create moist please xplain.l
Bhai mera realme X7 cooling ho raha he lekin samsung m30 nehi
Mr Hackshaw is my favourite channel.
Thanks
@@Mr_Hacksaw* a 3D printer could've made this project more professional looking but those are pretty pricey!*
El ventilador debe aventar aire hacia el disipador ?
Si, en el lado caliente, para que el lado que Enfría baje más la temperatura
Can u Suggest me the shoping link of Peltier module, heatsink n Fan..
Bro what if it make phone over cool
Bit why a heatsink on top of a peltier isnt it supposed to be a cooler itself
thermal paste can improve it's conduction heat transfer
But why would you use a stationary power source for this kinda thing? You could've used a dc-dc step-up and power it with a powerbank.
Just buy one bro
Please where can I get one to purchase and a name so I can search
You put peltier wrong. You had put heating surface of peltier attached to phone .. how it will cool that phone
Hot side connect with phone
The fan is giving the air in or taking out ????🤔
You find the answer?
@@devilxjinyt ohh , its 3 years to this comment 😂😂
Yes, i found the answer, because fan is fixed on the heatsink, it have to blow air from outside to inside as a radiator
Doesn't the writing side(TLC 12706) is the Colling side?!🤔
What is the glue name to stick it
You put cold side up and hot on phone
That's my question too
Hey!cant I use a powerbank or 9v battery suggest me something cause de 12v DC module is a little to big to carry around
The power of a powerbank is just 5v and that is a 12v piltier is can't lift it up
@@mjavanzado2390 so wat else other den de 12 v thing wat else can I use
Just buy 5v to 12v converter or you'll just make one
You can find it in amazon, lazada, shoppe and banggood
@@mjavanzado2390 kk thanks bro
Este video tiene un monton de errores como poner el peltier en la contrario lo puso del lado que genera calor ,no puso una lamina de aluminio o cobre entre el celular y el peltier ,no uso pasta termica ,el ventilador tambien lo puso en el lado contrario se supone que debe echar aire al Disipador son observaciones que debe mejorar para tener un mejor resultado
New motivation videos
Lolzu put the heatside on phone ...😂
ایول
I would rather buy mobile cooling system with half the effort than making this.
But good video though.
Maybe it is not for people like me. 🙂🌷
lol same
Same better buy memo cooling fan or thunderpro👍🏻...this DIY stuff is not cheap👎🏻
Can u give the link to purchase the items used in your video
You are the best and your ideas are brilliant just like next generation
Good job...bhai aap big frigee mai baith jao...yeah sbb nhi karna padega
this fan 12v or peltier 12v ?
the peltier
Can we use 5,6,7,8 or 9 volte battery instead of 12. Coz i don't wanna freez my phone.
No u cant coz the module only work on 12v dc supply
MISTAKES:
1: MOBILE PHONE PROCESSORS WILL BE IN TOP SIDE YOU ARE COOLING IN MIDDLE
2: BY THE COOLING BY PELTIER IT EFFECT YOUR MOTHERBOARD AND PHONE WILL BE DEAD BECAUSE IT MAKE ICE AND VERY COOL AND IT WILL GOES INSIDE PHN COVER TO MOTHERBOARD
3: YOU DO NOT USE THERMAL PASTE
4: YOU USE HOTGLUE THAT EFFECT IN INCREASING TEMPERATURE
5: YOU USED A BIG HEAT SINK AND SMALL COOLING FAN IT IS NOT SUITABLE FOR COOLING THAT PELTIER MODULE
fool you put the peltier in wrong direction or otherwise i guess you live in Antarctica so that you phone won't freeze
and last question how do you know that the cpu is located at that place
usually cpu is surprise surprise where the camera module sits=at the top duh
Gan pake peltier itu ngak bakal ngembun dan ngerusak komponen internal?
The cpu of the iPhone 8 Plus is not placed there! Not in the middle! When you have the BACK of the phone facing you, the cpu is in the left middle side, you could have a MUCH better performance if the cooling is placed closer to cpu
It's ok dude tht module is giving him -17 to -20 degree celsius
@@pushprajsinghpaleria698 still, in every case, you want the cooling to be the closest to the cpu
With that price you could have a nice factory made cooler , but im here because teacher told us to do project
Where?
Thts not evn the right place,still u should made made 3d body for tht holder
Thanks for this video bro
Hi can. You tell me the size of heat sink dc fan 😁😁
Please give me link to buy it in india now during this 🔐
Can i use without heat sink
bro air flow of fan should go down to module or go up
Up kyoki heat ko Bahar nikalna hota hai
ผมก็คิดว่าจะทำ ไม่นึกว่าจะมีคนเคยทำ แล้วมันเย็นขึ้นมากมั้ยครับ
มันก็เย็นมากนะครับ เเต่กินค่าไฟเยอะมากนะครับ
فكره جميله جدا احسنت
You bought 6volt peltier and connected 12v power source nice youtube trick
Thats not 6volt thats 6amp
Got it
From where i will heat sink
Bro como se llaman los materiales
Phone cool ❌ Phone Hot ✅
Wrong side
Isn't the thermoelectric cooler make the phone too cool
And makes the heat sink double +100 heat😍🙏😅😅
Op bro
Where is the buying link in description
Bhai aapne to iseulta laga diya jaha garam hota hai vo side aapne phone ki taraf lagaya 🤔🤔🤨🤨🤣🤣🤣🤣
Won't the Phone freeze??
Ese acca to mobile cooling pad buy kar lete
Its totaly fake beacuse
1: He placed hot side of the peltier touching mobile,it will make the mobile more hot
2: Even if he placed the hot side on the heatsink,it cant control the heat and the fan will not be able to remove heat from the sink and heat tranfer from hot to cold side
The heat sink you use I know you take from Computer CPU because today I also computer cpu today and I got same heatsink with the pin 😂😂😂😂😂😂😂😂😂😂😂😂😂😂
Why use hot glue?
Will it work on fiber glass body phones
i have try it on my phone.there's ghost touch.I don't know why
no thermal paste?
نسيت أن تضع اللكود (المعجون الحراري)
بين الجوال المبرد
Thats dangerous, applying gluegun to the phone casing with the phone on it
He can remove it when his phone will heat😂
It is good for phone
👎 for not showing device temp stats and cooler performance
You should have removed the heat sink we don't need that
Pano mo nasabe?
@@emmanuelgallardo9811 what do you mean
Emmanuel Gallardo gago hahaha
listen, the circuit board wont cool unless there is a vent in the back of the phone cover, that only cools the cover,lol phone and battery still gonna damage
Its good but not Enough, why to carry such Load !
Not for you only for gamers
@@eagle7015 Dude, I am a Gamer & Mechanical Engineer, I am making one, too
@@KZNJay but bro there ain't no way😂 ,we have carry it somehow.
@@ragul6356 Not necessarily..
@@KZNJay what d u mean , can we detach it??
bro is using 91Watts just for that😂
wrong cooling side and no thermal paste.
Ringtone name plz
Every one please don't try this because you mobile will be ded because that peliter will make ice so in your phone will be ice and phone will die if also you want to try then the that white colour plate and phone want to have a big distance or you phone will be damage
How to buy
Dc fan size
It cause damage to hand
Give some links for product not for ad. 😡😡😡😡
You alier 👹 ....you put a hot side 🔥 touching mobile 📲 and the cold side ❄️ on outer side . And the heat of peltier will fluid the hot glue
Brilliant u r!!
U put hotside on mobile
thanks bro it works great for me
Bro it's not effective as it us connected to the mobile case
Wtf u put the pieltier wrong way.
Bro link Nahi hai
Looking for links😑😑😑