Video není dostupné.
Omlouváme se.
D7 4T Caterpillar Dozer: One Heavy Motor We Popped Out Today July 07 2024
Vložit
- čas přidán 19. 08. 2024
- it was an early start to pop the motor out of the D7 4T known as Jack but for some reason it is a very heavy motor. the staff had to run the M816 military wrecker so i could get the clutch shaft away from the transmission input shaft. once the motor was out then it was a dirty job popping it apart to see why there was so many noises on the crank when spinning it over by hand. the staff had a busy day in her yard plus cooked a good dinner for us too thansk
this is a daily updated channel from the Kingdom in Northern Manitoba Canada where every day is a struggle to survive in the new world we now live in. the life style of recycling, re-using, re-purposing plus living with no money is what the Kingdom has been all about for the last 28 years. we have been doing it long before it became a cool lifestyle. thansk
email ---- kingofobsolete(at)gmail.com
postal address ---- King of Obsolete, Box 372, Lynn Lake Manitoba, r0b 0w0, Canada
Joey Barnes KoO Amazon Author Page -- www.amazon.com...
20 years of my website -- www.kingofobso...
Dogs dig to find cool spot to lay in
I was gonna mention the same.
yes they do thansk
The dogs are digging under their stairs, in a effort to get out of the sun and stay cool. It’s instinct. I had a dog that dug s full basement under his dog house.
yes natures way. thansk
I very much enjoyed watching the tear-down of the engine. Educational!
Oh, and I can tell from your parts bins that you like Folgers coffee.
yes it seems to be the coffee of the north because of the water i guess. thansk
Excellent team work! 😊
thank you we are professionals, lol thansk
Excellent video king 👑. No matter how the parts turned out you keep a positive attitude about the projects 🤘. And you try to teach others this and being organized.
yes my cup of coffee is always 1/2 full of Vodka, lol thansk
Never saw a clutch like that before. Gonna be learning for sure
😎
yes they had unique ideas back then thansk
Excellent thats a lot work🎉🎉🎉
thank you, it was and better to do it now then outside in the winter. thansk
2nd yay king is on better than watching blues Brothers mall chase lol 😊
yes that was a good film thansk
Was watching mall chase when u popped on luv that scene excellent
Knowledge is everything, smart man good learning video
thank you, that is how i learned by others helping me out thansk
I'm intimidated at my perspective from here, that's why you're the King there. That's a big motor!
Stayin tuned! 👍🤠
thank you, i credit the beverage for my bravery in tackling such a big project, lol thansk
@@JohnShinn1960 😎
That's heavy metal 🤘
yes very heavy and trust it like and ex-wife too, lol thansk
@@kevingilbert9695 😎
Joey u got hot 🔥 never to much excellent guys cheers 🥂 😊
thank you, just having fun thansk
King🤴, thanks for another awesome video 📹. My brother and I started working on th forklift today . We found out that it's a 2015 Perkins diesel, and they never got it running. My brother and I both know a lot about these engines. For some reason,
they were putting the 1990 injector pump on the
new engine. The right pump was lying in the cab ! Talk to you later.
yes great fun figuring out what and why they did things, remember a lot of people are not mechanics or use common sense to work on items thansk
hey joey pop a wheelie on the green toy yee haw very educational video on that cat engine please keep in touch!!!!!!!!!
thank you will do thansk
I was thinking why didnt you just go to town to eat with her but what was i thinking. You were day drinkin lol
going to WHO-ville is too emotional for me since they hate me, lol thansk
That’s a strange bearing break . Hopefully nothing major is going on one time I pulled a hd6 apart someone had cut the crank down and there was 2 sets of bearings stacked on top of each other that was back in 1980 the guy had just bought definitely some one pulled a fast one to sell it .👍👍🇺🇸🇺🇸
yes i am hoping being at such a remote location they tossed in the wrong bearings since the motor block is not the colour green thansk
Good morning from Cape Cod ⛵ it's incredible the amount of work and how complicated caterpillar made their engines, I got to hand it to you, you just keep on plugging along. Are you hopeful that it will actually run again Joey? Dinner looked awesome Xena. Keep up the good work guys ✌️🇺🇲🇨🇦
i was wondering where you were when i did not see your daily comment. yes caterpillar made life as a mechanic very hard but then again these machines are still around 80 years later. supper was good and we actually get 2 meals out of it too. thansk
Joey when editing kick on Shania twain u may not like first song I did not but after that luve violn rock give it a Chace calms my nerves 😊😊
yes shania had some good songs back in the day and put canada on the map thansk
Then mutt Lang messed her up
Funny you should talk about hydro issues. Where I live in the South of Onscario, we have had a LOT of power outages lately. So, recently, our local (f)utility decided it should release a statement, addressing all of these frequent outages.
So, I began to read their little statement. Basically, summed up, it's a pass-the-buck, cover-ass, waste of everyone's time bulletin saying that all of these recent power outages have been a result of conditions beyond the control of our local (f)utility (meaning they were faults that occurred outside of our town, on the main provincial grid), due to failures, accidents, animal interference (that one is really popular nowadays), and that none of it could be attributed to our perfect little (f)utility's infrastructure.
So basically, it was a news release saying "It wasn't our fault, it's not our fault, and going forward, it won't be our fault, so shut your mouth, pay your bill, and bend over while the new rate structure comes down from on high to your mailbox."
yes and you can't send them a bill for what it costs you when they have power problems. the new world is not a happy place, lol thansk
Maybe putting some rocks in the holes first and a little dirt on top will help for the dogs digging
i think she will be doing that next time for sure thansk
👍👍
thansk
27.5 c at 8:01 pm
that is warm still thansk
Those links on those clutches are suposed to push not pull
no idea, just too spookie for me, lol thansk
Mintatoba...
close enough, lol thansk
Hey King, Staff, I'd comment but someone just takes it down. ben/ michigan
that is ok you can just type ok so we know you are still here and having fun, lol thansk
Don't know about 3 out 4 but 2 out 3 is not bad from Meatloaf was pretty good. You need to forget about 54 to 59 Chevy's and go to Fords .😂😂
yes meatloaf had a lot of good songs that i could never air guitar too. still not sure about fords, lol thansk
So you have another Caterpillar motor to put in there or are you rebuilding her thank you for the video
we will see if we can fix this one with the no budget we have now, lol thansk
Weird clutch system
yes it was state of the art 80 years ago, lol thansk
@@kingofobsolete4789 my D7 17A has an oil clutch thank god
@@duanedale2505 yes lot better design and last a lot longer too thansk
I have all torque specifications if you need Them
thank you, will keep you in mind if i can't find my book. thansk