IG - Static_Homie_Quan Lovelessfab.com Sc300 4.27 diff, there is 2 driveshaft flange sizes between SC/LS years so make sure you get the correct one. There is solid adapter guibos that can work.
What happened to the content bro!? I just picked up another ls400 and your vids have fully made me want to turn mine into a drift build. Hope to see ya back!
I have a ‘97 ls 400 with a welded diff. I like it and all but it’s my daily so I was wanting to get the diff swapped. What would be the cheapest and most efficient way to do this? I have a mechanic that can do the work
You can swap in a 98-00 ls400 rear subframe then run a kaaz lsd with a 98-00 ls400 diff or a Supra lsd, the other option would be making front mounts like I did in this video and run the diffs I mentioned
@@flexusgarage6577 so will a sc300 4.27 bolt right up to my 98 without any tabs? do i just have to switch the rear cover? also did you run into any cracked or worn bushings? thinking about going to a polyurethane or solid.
Love the ls400 hope to see content again soon
Now I understand lol you swapped the cover that makes so much sense
What happened to the content bro!? I just picked up another ls400 and your vids have fully made me want to turn mine into a drift build. Hope to see ya back!
Seen it on the page man!!! Good work bro keep it up!
Can you tell a difference in 0-60
Wow, all that at about 1k rpm
Yep lol the old soggy cluster. Both my first gens the tach is that way and one the speedo doesn't work. The one that DOES work has no light lmao.
I have a ‘97 ls 400 with a welded diff. I like it and all but it’s my daily so I was wanting to get the diff swapped. What would be the cheapest and most efficient way to do this? I have a mechanic that can do the work
Did you end up putting this on your second gen
The sifting at the last was that all in first gear?
i’m pretty syre
A tire change and welded stock differential does the same thing 205 50 16 is tire on my 1998+ and it’s a lot faster in low end mid range.
So all you had to do was change diff covers and it was a direct bolt on?
those diff mounts are hella sketchy my boi, not strong enough for punching the throttle with v8 and welded diff
They’re still holding up fine lol
Nice 🔥🔥
What year will the diff fit in
When you gonna upload another video?
do you make these "tabs" used in the video? i'd love to buy some!
If there’s enough interest I could Fab up some nicer tabs
@@flexusgarage6577 yes plz
Why did you stop uploading?
bro..where's my videos.. what happened to the silver car..this is bs i hope u get a flat..:)
What steering wheel hub are you using
Will be waiting for next vid
Hey Flexus! I want to put a PROPER Limited Slip Differential in my 95 LS400, any advice on the swap?
You can swap in a 98-00 ls400 rear subframe then run a kaaz lsd with a 98-00 ls400 diff or a Supra lsd, the other option would be making front mounts like I did in this video and run the diffs I mentioned
What year Supra I have a 98 ls400?
@@EpTree Mk4 Supra, so the last 90's Supras.
What year sc300, any?
They’re all the same yes
Did this mess up your speedometer.
It will be off
Where can I buy one of these diffs? What year is your car.
The come off automatic sc300s
This Ls400 is a 1992
What year sc300 diff did you go with?
@@flexusgarage6577 so will a sc300 4.27 bolt right up to my 98 without any tabs? do i just have to switch the rear cover? also did you run into any cracked or worn bushings? thinking about going to a polyurethane or solid.
????????
why tf is there 3 diff cars in this channel
New year, new ls400 😂
@@flexusgarage6577 new video soon?
whats your instagram!
Whats your ig